How to Quickly Carve a Guitar Neck | Building the Temple Guitars Router Jig

Рет қаралды 168,296

3 жыл бұрын

This is a great jig to build if you want to quickly and accurately carve a guitar neck with your router. This jig offers CNC Repeatability so you can reproduce your favorite guitar neck profiles. All you have to do is create the cams with your desired profile. This version of the jig is drawn up by my buddy Jayszun of Temple Guitars. Jayszun makes these personalized by taking your neck dimensions and applying them to the jig.
For the record, I mispronounced Jayszun's name, it’s pronounced ‘yaa-sn’. I apologize for this error. I had one job. Lol.
Here are some links to connect with Temple Guitars
Connect with Temple Guitars on Social - / templeguitars
Temple Guitars on KZfaq - / templeguitars
Visit the Temple Guitars Website - www.temple-guitars.com/
-- Visit My Website--
www.homebuiltworkshop.com/
-- Ways To Support HBW --
www.homebuiltworkshop.com/sup...
-- My TeeSpring Store --
teespring.com/stores/home-bui...
-- My Amazon Affiliate Store for recommended products--
www.amazon.com/shop/homebuilt...
-- Join the HBW Built not Bought Facebook Group --
/ 623919504748705
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
-- Join the Community on my Website --
www.homebuiltworkshop.com/com...
-- Check Out My Handmade Guitars --
www.hayleyguitars.com/
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#guitarbuilding #hayleyguitars #routerjig

Пікірлер: 287

@martinschuringa6198 Жыл бұрын

Man i love your videos! They're so clear and well explained.

@joelongstaff7601 Жыл бұрын

Sir just a note of thanks. 2 years ago I wrote you about this video and then built one of these jigs. I've made lots of necks in it and made a few changes but mostly it's the same. I like your clearly spoken well shown way of working. Thankyou! God bless.

@71tbomb 2 жыл бұрын

I'm Australian. So I was glad to see a vid done in metric. I'm also a printer by trade & worked for years in a factory with both new & old machines. Half still in Imperial. I'm glad I know both, but I prefer Metric. I just think it makes things a lot easier to work out. I was also taught Metric at school when I was a kid. but each to their own. Very good vid. Thank You.

@DaisyHollowBooks 3 жыл бұрын

I wish we’d all switch to metric next week and have done with it. I’d stomp around and be angry for six months because I wouldn’t know what the temperature was outside, then I’d adjust. It would make a lot of my projects so much easier! I love this project!

@homebuiltshop 3 жыл бұрын

I kind of agree. I like the imperial system as it all I really know, but we'd get used to metric and move on.

@ruthlesscutthroat4030 3 жыл бұрын

living on both sides of the ocean i can tell you both have their merits. for example i would always say "can u move the glass a couple inches from the edge of the table" and would never say " 5 centimetres...". I also would say its about a 1mm in width and never say whatever the hell fraction it is.

@joelongstaff7601 3 жыл бұрын

Another advantage is once you get used to it you measure in 1/2 or 1 mm that's 1/48 or 1/24 of an inch. I try to work to that degree but,lets say there's room to improve.

@darthjarjarbinks8953 3 жыл бұрын

From what I remember, they tried to switch back in the 50s or 60s, but it would have messed up a lot of stuff, so they never actually did it. I’m familiar with both, but I can understand some people’s struggles.

@dappawap 2 жыл бұрын

ha...I am Canadian, so Metric is nothing new, but my parwnts grew up Imperial, and I learned both in school,so I am familiar with Deg Fahrenheit in summer, Celcius in winter, mpg vs L/100km and feet inches is still standard for construction, but metric is hard to beat most of the time.

@o.w.dobbins6927 Жыл бұрын

Really ingenious neck jig, great job!

@crunchysteve Ай бұрын

So, I decided to have a crack at designing my own, to fit my router. Made some changes, pivot slots in from the top, rather than hangs from elastic, which inverts the radii of the profile wheels (lower wheel radius for greater cut and vice-versa), but allows for working in even passes from one side of the neck, around to the other. I can also 3D print my radius wheels, making for a more mathematically precise curve transition. I haven't even built the design yet and I LOVE this tool. My estimate is less than AU$100 (~US$67) from go to woh-uo there, it's done. Less for me because I already have the necessary bearings for the profile wheels to run on and I'll only need a single 1200x600z12mm sheet of structural ply to build it. All of it other than the screws bolts and profile wheels. Thank you for showing me the way to realise a lifelong dream!

@westleybruggeman2400 2 жыл бұрын

As someone who is a novice guitar builder i really enjoyed the video and cant wait to make my own jig

@mattfischer3853 3 жыл бұрын

This is awesome. Simple solution, just have to be extremely accurate the first time, but after that what a time saver. Great idea, great video 👍

@homebuiltshop 3 жыл бұрын

Yes, if you take the time first, it will pay off later.

@JefAlanLong 3 жыл бұрын

You can easily radius your fingerboards with this too. Nice job

@robertr4193 2 жыл бұрын

Nice adjustable jig for quicker neck profiling. Neat idea. I'll have to checkout Temple Guitars to find plans.

@sentpacking3879 3 жыл бұрын

Thanks Jeff,.... very timely as I just emailed you a day or so ago asking if you had plans for a neck jig, as you'd talked about this in a previous episode. THEN I went and missed this episode yesterday where you spoke about making the video above and the making of the jig. ...whew ! So thanks Jeff for this video. I'm hoping I can afford the plans for this jig from Temple s.Guitar Hi to all the usual suspects/viewers, I've missed chatting with you all. I have to go to bed earlier Tuesdays and get up earlier on Wednesday.

@homebuiltshop 3 жыл бұрын

We missed you!

@basilreardon5783 2 жыл бұрын

Damn great insight regarding lining the bit up for drilling 👍

@FredMcIntyre 3 жыл бұрын

Awesome work Jeff! 😃👍🏻👊🏻

@homebuiltshop 3 жыл бұрын

Thank You Fred!

@jeffhampton6972 Жыл бұрын

These videos are so helpful! Thank you for making them. :D

@homebuiltshop Жыл бұрын

Thanks. I'm happy they're helpful.

@profpep 3 жыл бұрын

Nice work. Love the pencils trick. Going to use that one!

@WeBuildStuff Жыл бұрын

Almost finished my first guitar neck with the profile done with mostly handtools. If I continue making guitars for fun I'll totally build one of these!

@buickkootje 3 жыл бұрын

Well timed! Was planning to carve my neck tomorrow!

@homebuiltshop 3 жыл бұрын

Perfect! Good luck with it.

@ontherhodes8088 3 жыл бұрын

Great channel Jeff. Greetings from Australia.

@lolitawilson4970 2 жыл бұрын

Awesome Work!!!

@oneconsc3333 2 жыл бұрын

I knew this was possible.... it's nice working with hand tools and feeling the wood BUT, even if you at masking Neri expensive guitars... always a good thing when you can save time🙏🏻🇨🇦

@k9taxi 3 жыл бұрын

I can't find the plans on the Temple Guitars website. However, I did find a cool neck transition jig that I'm going to build. UPDATE: I found it. The info for the plans is not on his web site. It's in the description section of his youtube video for the jig. That video is only on his youtube channel and not on his web site.

@TempleGuitars Жыл бұрын

Hi mate. I don't have a website, just KZfaq and Instagram.

@MakinSawdust 3 жыл бұрын

Great video Jeff!!

@homebuiltshop 3 жыл бұрын

Thank You! Hope you're doing great.

@Terribleguitarist89 3 жыл бұрын

Really cool idea, definitely would love to build one with some V and U cams to satiate my 50s fender neck fetish lol

@chrisperkins5671 Жыл бұрын

I sympathise with you struggling with metric to imperial. For me the struggle is the other way round. It becomes one of the skills you need to do stuff. I am still baffled that anyone would cling on to the imperial system where you need to do mental gymnastics to work out if one fraction is bigger or smaller than another. I suppose it becomes obvious if you are used to it. Great video. Very helpful. Thanks

@2AChef-n-BBQ 3 жыл бұрын

Yeah, it's a very common jig, and works really well... Good demo

@homebuiltshop 3 жыл бұрын

I've wanted to make one for a while but there were some aspects of it I didn't fully understand. Having a plan to work from, really helped me understand everything. Now I know what I need to do for version 2.

@2AChef-n-BBQ 3 жыл бұрын

@@homebuiltshop I never built one because I build mainly neck through, so they don't apply😝

@byronmiller3159 3 жыл бұрын

Awesome video!

@whitemaneric4548 2 жыл бұрын

it's nice . I understand the concept thanks

@dsb227 5 ай бұрын

Wow! Nice Dude!

@eskrimadorchris 3 жыл бұрын

Nice! Now...put the whole box on a slide track and build a mount bracket for the router tool so you can have both hands on the carve box and the router can be held stationary. You'll gain more control over your carve that way. You'll also want to find your max depth for your router so you will have consistent carves, and gauge each time you put the router in place to work. Nice DIY tool!!!!!

@homebuiltshop 3 жыл бұрын

There are so many mods that can be done from here. I've seen some amazing versions of jigs like this.

@AlanKaruzo 3 жыл бұрын

This man is pro!

@matsmagnem7517 3 жыл бұрын

Subscribed 😎👍 Awesome!

@tedposobiec 3 жыл бұрын

Very good video thank you

@93BossRoss 2 жыл бұрын

Your videos are awesome man. And also, you look so much like a specific movie actor who I can't place and it's pissing me off.

@timmyrock4629 Жыл бұрын

Made one! Ty!!! Used some springs from a lamp!

@SkyscraperGuitars 2 жыл бұрын

Very cool!

@dannyriter4046 Жыл бұрын

Appreciate you sharing your neck carving jig. Was going to make one and was modeling it after yours. Also wanted to share the jig from Randy’s Guitars and Broncos (part 4 in his series). He adds a riser at both ends of the jig that lifts the router nearly eliminating the need to blend in the valute (not sure of spelling) area and the body joining end of the neck. Thinking you might also come up with a few upgrades. Check it out if you have time.

@homebuiltshop Жыл бұрын

The riser is a great idea. That would save quite a bit of extra shaping.

@MarksmanGuitar 3 жыл бұрын

Nice jig , good work . Its always faltering inspiring people.

@andrewgray9663 3 жыл бұрын

I don't build guitars, don't even play guitar, but I still happily watched every minute of this. Now that you have tried using metric measurements what do you think? Would you ever adopt the devil's measurement?

@homebuiltshop 3 жыл бұрын

I think I'll do a short video soon about that. I honestly think I like it. The math is way easier and for some reason I feel I can be more accurate with it.

@luissaints7082 Жыл бұрын

thanks excelent technic !

@jamesbagshaw8251 6 ай бұрын

Very good!

@mrfatbobrider1969 3 жыл бұрын

Hey Jeff , love the content and happy comment here in New Zealand,great stuff dude.😎✌

@homebuiltshop 3 жыл бұрын

Thanks! I appreciate it. I hope things are great in New Zealand.

@mrfatbobrider1969 3 жыл бұрын

@@homebuiltshop everything good at this end , hope you guys are handling this covid epidemic..take care out there.

@dawsonwurdeman5531 3 жыл бұрын

That’s awesome! Never done luthier work but have wanted to for awhile. I wonder if you could possibly put a roller/rail system, like in a drawer, to make the shaping process smoother. A quality of life thing if it works but still cool.

@homebuiltshop 3 жыл бұрын

Yes, that might work great too. There are so many modifications, improvements, and changes you can do.

@maxkaffeine4225 2 жыл бұрын

Love your 04:44-07:04 T-shirt.

@TempleGuitars 3 жыл бұрын

Thanks Jeff! Looks better than mine haha!

@homebuiltshop 3 жыл бұрын

Thanks! I am looking forward to making necks even more now. I'm working on a few different cams now for different profiles.

@davidmead9799 6 ай бұрын

Love your channel sir. You're very inspiring. Im curious how this would work with a scarf jointed neck

@mikkosutube 3 жыл бұрын

great tip on aligning the bit with the guide mark..wonder why this didnt occur to me before...

@ReeWebster 3 ай бұрын

Bones Red “standard.” Gotta love it 😂

@fredchatham6680 3 жыл бұрын

Brilliant. Idea.

@homebuiltshop 3 жыл бұрын

Thanks!

@omorganstudios 3 жыл бұрын

Yeah I get it 8:38 they are kinda scaling it or extending the shape as if you are making a long tapered cylinder👍

@MarkFromTaiwan 3 жыл бұрын

really smart

@MasterZelgadis 2 жыл бұрын

Yay for metric system! :D

@believitornot9775 Жыл бұрын

Sure, I will do it.

@prvivozac 2 жыл бұрын

genious :)

@JBSlickflyer 3 жыл бұрын

A bull nose router bit might make to easier to transition, when you carve the heel and headstock transitions.

@AlexTapisevic Жыл бұрын

i´m still doing it by hand thamks.

@truescotsman4103 3 жыл бұрын

ive thought about using a router and a 1" round over bit. seems a lot of work for the same result.

@Three_Eyed_Willy 3 жыл бұрын

Interesting!!! Thanks!

@NeoGeoEch13 3 жыл бұрын

I made one my self having seen the various jigs and tested it with three pine blocks. Cut lines are visible but you can sand them easily and it works great. However, to be honest, it scares the crap out of me that the router is taking off so much material, despite I try to make shallow passes, I don't "feel safe". Are you reversing the cutting direction past the first half of the neck, like you would if routing a body?

@angelsbum 3 жыл бұрын

Great video, very informative and good personality. One question, where can I find templates for cams for different necks. This video made a lot of sense to me. I will be having a go at making a neck now.

@fermisparadox01 2 жыл бұрын

I don't understand any of it. Can you help me

@Sohlguitars 4 ай бұрын

Love this tutorial, what is the bit/ size you're using to shape this ? (the yellow one) Thanks!

@musikchanel6975 2 жыл бұрын

Yes

@lucabennati360 2 жыл бұрын

If the shape of the neck you want to achieve has a radius lenght of i.e. 2cm, and the template shape radius touching the bearing is long for example 3cm, it should be that the template is x1.5 than the real shape of the neck.

@zeetekton1016 2 жыл бұрын

Good day sir... may i know what is the diameter of the two cams?.... the large one and the smaller one.. Thank you very much for your tutorial build..

@jeanmanuelferreira6980 2 жыл бұрын

Hello; Is it possible to have the dimensions of each element, please? very good job.

@TheCerealQuiler 3 жыл бұрын

I was trhinking about making a jig to create compound radius fingerboards and then found that video... One more invention someone else did before...

@homebuiltshop 3 жыл бұрын

I plan to try this for fretboards as well.

@andrzejszymaniec3763 Жыл бұрын

nice

@homebuiltshop Жыл бұрын

Thanks

@DanielLopez-up6os 3 жыл бұрын

How Much of this Would Be Achivable with hand tools if i dont have a router and a bandsaw etc? but only jigsaw hand router etc.

@Reign_In_Blood_963 3 жыл бұрын

Need plans for one that does the Strandberg profile. That's be great.

@NicoTheLayabout 3 жыл бұрын

Replicating Strandberg's neck profile would infringe their copyright, you'd need a license.

@PaulWilliamsheiowge 3 жыл бұрын

Excellent idea. Any chance you could show one of these modified for a through neck with angled headstock? I'm building a through neck 6 string bass when I'm out of lockdown. Cheers.

@homebuiltshop 3 жыл бұрын

I believe Temple Guitars has done a modified version for angled headstocks. You might be able to contact him for a plan.

@rolandvanalphen4355 11 ай бұрын

Hi! Where can I find some measurement indications? Thnx!

@lecherousgaze 3 жыл бұрын

If you learn how to do it by hand with a rasp it will be more rewarding in the long run! The first few were very slow and time consuming but before to long you can have a neck fully profiled in about 30 minutes

@encryptor6710 Жыл бұрын

The rewarding part for me is getting it built faster to be able to play it. Im all for getting more accurate results everytime. Especially if you find a specific neck profile you like and want to copy. You can make exact cam templates for that neck. Bust them out in 5 minutes everytime.

@Graeck Жыл бұрын

We should all be using metric! 😊

@davidmead9799 Жыл бұрын

Love your chanel and love your work. What is the bit size you use for the router??

@homebuiltshop Жыл бұрын

Thanks, I used a 1/4" bit.

@dnthasslehoff 3 жыл бұрын

I don’t make guitars, but love me a good jig, nice project and hope it serves you well. How do you that battery powered router?

@homebuiltshop 3 жыл бұрын

Thanks, I really like the router. I like the convenience of no having a cord to worry about. I use this one all the time.

@davidclink2032 3 жыл бұрын

Watched this a couple times. Also hours with 3d printing of parts. Went to Temple for plans but didn't work. I believe you could modify jig in the headstock & body end to rough away some of the hand work finishing those profiles. Possibly an adjustable router base to move east-west for careful freehanding flutes etc. 4 minutes for neck is awesome but still a couple hours or more in the headstock/ tail area. Just an idea. If you do your own plans for Fender Strst/Tele necks and cams eat let me know. No joy through Temple.

@TempleGuitars Жыл бұрын

I'd love to know what your issue was. I never heard anything from you?

@headkickko609 3 жыл бұрын

Kinda serves you right not having metric tools 🤣... Love the video bro, kinda makes me wanna send some metric callipers over.

@homebuiltshop 3 жыл бұрын

Serves me right. Lol. Thanks. I do need to find a good pair of metric calipers.

@MrVirgilVox 3 жыл бұрын

@@homebuiltshop working in metric? Welcome to 95% of worlds population. You are aware that you in the US are the odd ones with your complicated freedom units? 😎

@stephenshoihet2590 3 жыл бұрын

@@homebuiltshop get digital calipers, problem solved :-) and pretty much every smartphone calculator has a unit converter built in or just ask Google.

@kk-om5zm 3 жыл бұрын

καλημέρα Jeff. I hope you fell fine bro.Love from Europe, Grecce...

@homebuiltshop 3 жыл бұрын

Thanks man. All is well here. I wish the same for you.

@stormman8393 2 жыл бұрын

Great video. Could you use an already carved neck to dial in the cams?

@homebuiltshop 2 жыл бұрын

I bet you could. I think that could work great.

@walterrider9600 3 жыл бұрын

thank you . question please why did you not use a radius router bit so you would not have straight shoulders ?

@homebuiltshop 3 жыл бұрын

I didn't have a rounded bit at this time. I have since gotten one but for some reason, this straight bit still gives me a nicer surface. I'm still trying different ones though. I think I need to find one with just the right profile.

@gmac9667 9 ай бұрын

Hey man, how do you scale up radius to the correct size

@peterbutler5597 Жыл бұрын

You could cut a hole in the side for dust extraction

@yerblues10 Жыл бұрын

Watched a few of these neck router jig vids but still haven't seen anyone give away the dimensions for the neck profilers.

@eddododo 3 жыл бұрын

Did you find a good way to translate the guide puck disk thing shape to a neck profile? Is it simply a matter of taking the profile you want it and blowing it up a little bit ?

@homebuiltshop 3 жыл бұрын

It is just blowing up the shape you want. The only tricky part is getting them the right sizes.

@EddieMetal68 3 жыл бұрын

You can copy this jig with some modes, in order to clone neck profiles you want. Where the bearings touch the profile disks, remove the bearings and set the router bit right on that spot (one router for each side). (or a pencil for each side). Put new "blank" discs. Set one fixed guide on each side of the neck (headstock and guitar body), so the disks will move accordingly to the neck profile. A pair of wooden strips/bars connecting both sides of the frame will work ok. Turn manually the neck and you will have both disks milled or outlined. For short, reverse engineering! Don't forget to "hide" the fretboard Inside the carriage board, so the disks will not sum its thickness...

@homebuiltshop 3 жыл бұрын

This is a brilliant idea. Thanks for sharing. I need to experiment with it. I cant yet visualize how you reference the surface of the neck but I have an idea of it. If you've done this would you be able to email me more info? Homebuiltshop@gmail.com

@EddieMetal68 3 жыл бұрын

@@homebuiltshop it's very simple in fact. Look the template discs as "shadows" on the wall. The guitar neck is the object and the router bit (or in this case, to make the discs, the fixed wooden strips) are the candle... I will make a project using AutoCAD, then I can convert it to .pdf and send to your email address. I will not use measures, but I will put indications to use the same measures of your project already done. Just give me some days to sit back and draw everything!

@EddieMetal68 3 жыл бұрын

@@homebuiltshop sent... Let me know if you liked it or have any questions... Maybe I should have sent the simplest solution too. Tomorrow morning I will draw it, so you will not have to make extra parts...

@TheBelltowertrio 3 жыл бұрын

@@EddieMetal68 I this making my brain melt. Would you mind sending me that .pdf as well to cabguitar@gmail.com? I would love to try this out!

@EddieMetal68 3 жыл бұрын

@@TheBelltowertrio sent

@achille1st Жыл бұрын

Hi, nice video. temple-guitar web site is down. Would ou have the plans of your jig please? Best regards and happy new year

@Mossy5150 2 жыл бұрын

This is cool, but my question is around protecting the truss-rod; if you're carving that aggressively, how are you sure you've indexed the cams to stay away from the truss-rod cavity? I'm sure ideally you'd have everything measured correctly, but it would be nice if there was some math to show avoidance of the truss-rod in the cam design. Great explainer, makes me want to go build one of these right now and start playing around!

@bomark2002 6 ай бұрын

Wonder why no answer

@Lemmy30294 3 жыл бұрын

Takes the fun out of it. Ok if you gotta do 10 necks a day. But really dehumanizes the process. I need to become one with the wood when carving and shaping a neck. To me it’s very personal- to feel the wood and the tools working together.

@homebuiltshop 3 жыл бұрын

I cant argue with that. I'll use this jig to get close, then fine tune it by hand from there. I do agree that the shaping is very calming.

@redwildgeeza Жыл бұрын

OOohh... to have all those tools....

@fueymanchoo1291 3 жыл бұрын

Here is a quick way to convert to metric. Multiply/Divide by 25.4. 1" = 25.4 mm. I had to do this a lot programming CNC equipment!

@twoshedsjackson6478 3 жыл бұрын

Do you play the mayor in Schitts Creek?

@RRVID 3 жыл бұрын

Good Video Jeff. Thoughts on custom templates to allow the same jig to conical radius a fret board?

@mrwaffles1394 3 жыл бұрын

I would imagine using different sized cams would achieve that. Figuring out the ratio of cam to carve would be the first step. You could really use this jig for more than just neck carving.

@homebuiltshop 3 жыл бұрын

I'm making a set now to test it out. I think it'll work out well.

@homebuiltshop 3 жыл бұрын

You are right, getting the sizes correct is the hardest part. Once you get it down, the only change is in the profile.

@DangerNoodle-yw8yt 6 ай бұрын

Great videos but they skipped over some crucial details about setting up accuracy. Like for example, how to mount the neck so that the centre of the neck is where you want it to be in the jig. Or how to set the radius. Or how you managed to make a left and right handed headstock pocket.

@Nick-sh8dv Ай бұрын

Centerline?

@fredro9289 2 жыл бұрын

excellent, how could I get the plans for this jig? Thank you

@homebuiltshop 2 жыл бұрын

You can get them from my buddy J at Temple Guitars. shoot him an email to hello@temple-guitars.com

@patsox2004 3 жыл бұрын

Guess you could use it for fret board radii as well. I wonder if you could set it up to do compound radii....

@homebuiltshop 3 жыл бұрын

I plan to test that theory. I'm pretty sure it would work but at this time, I haven't tried it yet.

@patsox2004 3 жыл бұрын

@@homebuiltshop Cool. Looking forward to seeing a video. Thanks

@bobsegar1242 3 жыл бұрын

Hey buddy, what’s the math on the wheels or where can I get the plans I found this cause I watched temple guitar videos and it was nice for you to explain the build. I have built my own but the math on the wheels I can’t seem to figure out

@homebuiltshop 3 жыл бұрын

If you extend the measurements of your neck out to the length of your jig, then add a certain amount (this can be whatever, as long as its the same for both cams) This becomes your cam size. For the profiles, I took the cross section of the 1st and 12th fret and applied it to the cam. Its just blown up to the size of the cam. I hope that helps a little. You can get the plans from Temple Guitars. You can email him at hello@temple-guitars.com. He sells customized plans. If you already have a jig, you might just need to fine tune your cams though.

@bobsegar1242 3 жыл бұрын

@@homebuiltshop I bought some... mwahahahahaha I found your video cause I had watched jayzsuns before

@tomalexiou9573 3 жыл бұрын

Hello,will my Bosch 1.25 HP palm router work for this application?

@TempleGuitars Жыл бұрын

Yes.

@TheBelltowertrio 3 жыл бұрын

Fantastic video! I am thinking about getting the plans from Temple Guitars, but i have one question: How do you determine the thickness of the neck and the taper ( how the neck gets thicker as you move toward the body of the guitar.) Thanks!

@bomark2002 6 ай бұрын

Hmm no answer wonder why