I could be wrong, but just from the close up of you revving it with it off the atv, it really looks like the variator you got doesnt have hardly enough travel closing to actually make good use of the cvt. Most scooter variators have more than an inch of travel along the boss to close, yours looks to only go a fraction of that. Its a cool idea with how you did it, but i think if you used an actual scooter variator itd have way more range and ratios

if you loosen that belt a little bit, you'll notice a huge improvement in the gear ratio change. you have to leave those belts on those cvt's loose, it allows for the gear ratio change. it starts out where the engine pulley is small, & the back pulley is large. as the RPMs increase, the front pulley becomes big, and the back pulley becomes small. this is your gear ratio change, and you should be able to see the CVT belt changing as this happens. yours doesn't move, I think it's just too tight it stays in one spot. should notice a 10 to 20 mile an hour increase, and still have the takeoff torque. but yeah, you have to loosen that belt.

Very impressive and a genuis idea, keep safe, kay Ma discover ra lagi ka.

man! you are a genius !!! i am thinking of doing something same with geared motorcycles. thanks for the idea..

Very well! Cool idea! I really like it! I love these designs, especially home built ones! Big like! Definitely a Subscription!

Cool idea I actually thought about doing this by cutting them back half of a scooter transmission off and mating it with a go-kart engine with a variator on the front, on a side note them shocks look way too stiff looks like it's a go-kart without shocks lol.

Wonderful job my friend! 👍👍👍

Thank you for creating such an informative and entertaining video on KZfaq. Your hard work and dedication to the topic really shines through and I appreciate the effort you put into it. Keep up the great content!

Thank you, i used this innovation my projekt👍🏻

The engine they just cut in half is one of the best I cannot believe they did that that is one of the best two-stroke engines out there oh my God I still can't believe they did that why did you cut it it was such a good engine

e davvero un ottimo veicolo il prossimo video lo voglio vederlo al mcdrive

Parabéns pelo vídeo

Your work is good, well done. I congratulate you on this ingenious skill. I love you. I will support you with a like and a subscription to the channel, and I tell you to continue.

really very creative friend, always successful, greetings from Indonesia

Now you got 9ut door drilling equipment cool

Great job

The transmission gear weldings will stand by such forces?

Good idea

Mantap bang... cocok untuk go kart

I think it's not rev high rpm to full engage the clutch. But it works all that's matters. Great build.

This is awesome!

Top demais amigo, parabéns pelo projeto inspirador.

Красава все доделаеш после испытания , молодец жирныи лаик

I think it will be more better if the sprocket has a same size. But nice work

No lugar do pião dentado coloca-se a roda será que daria certo?

Thanks I also did diy in my channel you are inspiring

hi you have a great idea it's very good wish you good health

what did you do with the piston and crankshaft

Hello, a question can you tell me the measurements of the band that the go kart uses please

I've been plotting this to install 212 predator on to Honda Spree problem Honda Spree Drive is in reverse would still have to cut up a gy6 motor to use that rear portion

you need to loosen the suspension up or it needs softer shocks

Nice idea

Good job.

Thsi is exactly what I want to do to my trailmaster 300 but use the chinese clutch and a 780r front clutch.

Good my friends 👍 👍 👍

Excellent build and machine !!!! :-)

Good 👍

Nice build btw

i need the model of the engine side of the clutch to see if theres a 1inch bore for a 406cc engine

I didn't see variable, only constant. So it's a CT transmission?

nice video

What kinds of bars did you use

Давно сделал уже передачу по такому принципу, видео на канале есть, про трактор из хлама

Bravo

mantap 👍👍👍

Nice

Good

bravo,tres bonne invention,c est possible de me dire ,c est quel embrayage pour l avant ,coté moteur ,merci

Mantap 🥰🤝

Já deixei o like

Супер!

I like it your video Good

Много раз такая мысль посещала, поженить GX-160 c вариатором.

Wonderful 💐💐💐💐

tell me how you convert cvt to instal on crankshaft for this engine

fc ครับ

Nice vedio 👍

Nyimak om 👍👍👍

Itu pengganti roler nya pakai apa om

This is so cool. ...

I was thinking that if you do a powder coated paint on all your builds they would look professional

Me gustaria ver si se puede alargar el cvt clutch de scooter para poner rines mas grandes como 15 o 17?

Funny thing is that the original scooter engine has almost the same hp as that 4stroke junk you used and is capable of much more

Looks bouncy, maybe letting some air out of tires would help

👍👍👍

Nice job .what is the max speed ???

Ok felicitari

Wow

can this be attached to the boat

has no rear suspension flex but it's cool

👍

4x4 จะดีมาก

В чём проблема взять родную втулка со шлицами и на неё расточить звёздочку? Сцепление и ремень долго не проживёт при таких нагрузках...

Bos glindingane papat Piro lengkap sak pelek e

กำลังเหลือๆ ✌️✌️✌️✌️💃💃💃💃

Can u send me link where u bought this variator?

Need change the shock in front

How much cost a compler kit ?

👍👍👍👍

💯

Есть ощущение, что ремень долго не продержится...

Amigo una pregunta) ¿el variador no se puede adaptar también directamente al motor?

Can for make traketor

With volks wagon engine cool custumized

jos

What is the top speed?

Totally AMAZING!!!!!!! 😱😱😱😱😱😱😱😱🤗🤗🤗🤗🤗😯😯😯😯💡💡💡💡💡💡💡

Might want to lower pressure in tires......

А реверс?

The rear shock has no travel otherwise you would be throwing off the chain drive.

good good✔️😘✔️😀😘

I ike this but gasoline tank near weldine spark is dangerous.

Z čoho tam máte ten variátor (prevodovku)?

Hey you must have five channels tech channel and other channels cool

I just want to know why you deleted all of your other restorations videos :(

Manni wish i had the know how tondo this!!😢

CVT CONTINUE VARIABEL TRANSMISI

Iso ae pakde iki..

I know a guy that does this ,he swears it works great but im skeptical of long-term

Hello how many horsepower does that motor have?