Рет қаралды 37,744
Many who had to deal with longitudinal cutting or cutting large sheets of metal, know-to make a smooth cut is very difficult. Especially when it comes to plasma cutting, where in addition it is necessary to control the distance from the burner to the metal surface.
I offer you my version of the carriage for plasma cutting and angel grinder. With its help, you can easily make a smooth cut of the required length-it all depends on the length of the selected guide. As a guide for the carriage can be used any standard profile section 40x40 or 40x60 and a length of six meters or more! You can cut lengthwise, crosswise or at any angle you want. Also, the carriage for plasma cutting and angel grinder can be used with a small circular saw or for cutting profile sheets with a grinder.
The simple design of my carriage for the angel grinder allows you to make it without welding and any devices-you only need a drill and a grinder. In this case, the body can be used for a small piece of rectangular pipe section 80x80, 100x100, etc.
If you liked the video, do not forget to like and visit the page of my channel=)).
Who was interested-subscribe to the channel. Will many interesting things!
Thank you for attention!