Homemade Gas Powered Plow 200cc

Рет қаралды 3,215,920

Жыл бұрын

To make a motorized plough I used a 200cc engine with a power of about 7hp, to simplify the construction I mounted a centrifugal clutch to the engine. The machine copes well during plowing, but in more difficult terrain it would be necessary to additionally load the machine to have better traction.

Пікірлер: 358

@RomsFabrication 11 ай бұрын

Napakagaling nyo po gumawa Sir Maraming matutonan ang mga manunuod nito salamat sapag bahagi ng iyong kaalaman👍👍👍

@baar6892 Жыл бұрын

I've never seen someone use a set screw like that instead of a keyway but I actually like the set screw idea better. Good thinking.

@cheeseymccheese7249 Жыл бұрын

Not a better way. Should have stayed the way with the set screw drilled and tapped through the hub. Great build though, im not knocking him at all. I think it was just an easier/quicker way to change wheels

@kagabopierre8027 Жыл бұрын

I have always wanted to go to good school like this man , but not lucky in my birth place there were only nonsense schools that teach nonsense theories kill people's life including myself, I would advise this man to also find his seat on the top of this incredible machine instead of getting tired running behind it and his weight will improve the stability of the machine 💪💪💪💪

@wingnutbert9685 11 ай бұрын

You learn a great deal of this stuff from the people your hang out with or work with. Much of it doesn't come from former schooling. You have to first have the mind for this work. Then you have to sponge up all the info you can from old farmers, mechanics and machinist/fabricators. It's an art to build stuff out of junk or stuff you have laying around and to be able to figure out and make the parts you need to put it all together and work. :) Find a workshop in your area. Tell them you want to really learn and would like to start by sweeping the floors and cleaning up.

@qayskaro2116 Жыл бұрын

The way he plays with metal is just incredible

@mhadlock78 10 ай бұрын

Nice machine, the only thing I would change is completely shrouding the lower chain to keep dirt out of it.

@yusifsuleiman5502 Жыл бұрын

You called it homemade? You mean, you have all those tools at home? 😮 Any way, I love the skills you put in making such hand work🎉

@user-nc4zl9vd1w Жыл бұрын

Уважение мужику!!! Рукастый да техника симпатичный и нужный в хозяйстве!!!

@s.m.5408 11 ай бұрын

Техника нормальная , не спорю, тут блин главное это его инструмент и умение им пользоваться , умеет он не только хорошо делать , умеет он своими роликами испортить мне настроение , да что там настроение , фактически жизнь ! 😭🤬

@Sergey_mehanizator 2 ай бұрын

Ага, особенно когда пашет не в ту сторону)))

@user-oy6qr8dd3r 10 күн бұрын

@@Sergey_mehanizator Пахать не в ту сторону, все равно намного легче, чем в ту, лопатой.

@PROProcesss Жыл бұрын

This is a great development for private use. It remains to paint and you can start mass production An interesting point is that the chain is not protected at the bottom, will it be clogged with earth and will it not become a problem of rapid wear of the star?

@DanKoning777 Жыл бұрын

A guard was added at 13:10 though a better design will likely be necessary-I'd like something with a seal. Say a used CV boot(s). It's rubber, flexible, and tough, plus they're meant to keep water and *dirt* out. ;) He'll also have to change the guard from a 2 piece to a 1 piece.

@WorkshopFromScratch Жыл бұрын

Thank you 😁 The machine will still be improved, that's why I didn't paint it, I just built it because I need it now :)

@sandymacpherson9400 11 ай бұрын

Scoots along well, but as you say, it may be a little light. Maybe some removable concrete disc inserts for the wheels, adds weight and keeps it low.

@estevaoinacio6431 4 ай бұрын

Excelente, project. 99/100. Possible imporvement - Use a closed gear transmision to the wheel, sand and mud will, ruin the chain and sprockets. Best of luck.

@toordog1753 Жыл бұрын

One minor change that will make a world of difference. Angle the plow about 8 or 10 toe down.

@user-es6ig1dn9i 11 ай бұрын

отдать 3

@MCsCreations Жыл бұрын

FANTASTIC build, dude! Really well done! 😃 That would be really useful, even for large plantations! Stay safe there with your family! 🖖😊

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@Long-diy Жыл бұрын

Giỏi vậy trờiii

@Evilslayer73 Жыл бұрын

Amazing build maybe reducing the gearing ratio is a good and more secure idea :)but wow amazing work!

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@thefixerofbrokenstuff Жыл бұрын

Cool stuff. I am envious of the soil you have. Might want some bigger wheels turning slower and a few hundred pounds more weight.

@stefanerdmann4697 Жыл бұрын

Thought the same. Good design, but a little to light. Also, does that lowermost chainguard do its job? That dirt was flying everywhere and i can see it building up in there.

@WorkshopFromScratch Жыл бұрын

The machine was built at a fast pace because it is needed now, later I will improve it and paint it 😁

@thefixerofbrokenstuff Жыл бұрын

@@WorkshopFromScratch looks like you are into the spring rains like we are. We got three inches today and my garden is a quagmire.

@MultiBigDenis Жыл бұрын

the nut, even if it is self-locking, should not be on the side of the attachment, it is worth putting the nuts on the side of the bed, this is how the bolted connection works better and more reliably. the cam clutch installed on your engine is not designed for smooth speed control, it will certainly try to work but still quickly fail, the cam clutch is essentially an on-off switch and not a dimer and not an analogue of a car clutch. It seems to me that it is better to use a standard belt clutch for walk-behind tractors. it was also worth making a second lower attachment point for the share, and a hole in the lower casing of the drive star, where all the dirt will be collected ...

@barthanes1 11 ай бұрын

Nice. I think the plow support frame needs gussets running diagonally down to the wheeled axle frame. There will be a large bending moment at that point as the plow blade has a long lever arm.

@romildojose5702 Жыл бұрын

Gostei demais irei fazer um desse em breve com outros acessórios

@Natureza12023 Жыл бұрын

Incrível este trator quero um desses 😊

@ricardoromeromercado7747 Жыл бұрын

Excelentes trabajos.. felicitaciones desde Argentina.

@user-wp2tk4cc7h Жыл бұрын

You're an able man who can even build an airplane. 대단해요👍👍👍👍👍

@user-hs4ut1oe6x Жыл бұрын

Высокая скорость! Маленький диаметр колёс. Маленький вес мотоблока. Хорошая почва! Хорошая,простая конструкция!

@alimudin3634 Жыл бұрын

how many times have I seen this video, but I'm surprised I never get tired of seeing it, thank you for wanting to share, and if I may just slow down the video so we can see how. to assemble it.

@davemall1 Жыл бұрын

I would love to see you build a 2 post car lift.

@primangoprek8627 Жыл бұрын

Kreatif pintar sekil fuul dengan peralatan yang sangat baik semangat terus berkarya

@arturlend2297 Жыл бұрын

Ciekawy sprzęt, teraz jeszcze do kompletu bronę i można działać 😁

@mechanik_opr93 Жыл бұрын

Za bronę robią koła, mielą lepiej niż brony 😂

@arturlend2297 Жыл бұрын

@@mechanik_opr93 można i tak 😂😂😂

@prabowoollo2088 Жыл бұрын

Hi. Thank you for all your hard work, I've been learned a lot from your videos through years. With all hope, can you please create a video about making HEAVY DUTY DOUGH MIXER WITH THE CHEAPEST AND EFFECTIVE WAYS ??

@moskwaa Жыл бұрын

Здесь есть русскоязычные? Лайк посмотрим сколько нас

@erikbraguim4288 Жыл бұрын

Muito bom parabéns pelo trabalho , mas faz aí Um quadriciclo ou algo do tipo acho legal esses projetos

@belloabdulrahman5552 Жыл бұрын

Pls can u list d name and model of vital machines in ur workshop cos am looking to setup one in my home town, really love especially ur cutting tools, drilling and fastening accessories . I would really appreciate ur reply

@markbooe205 Жыл бұрын

That is a good plow! Love that foot activated shop vice.

@wingnutbert9685 11 ай бұрын

I really admire your motorized machines! I really need a two wheel tractor for steep trails in my wooded property. Something to hook to a small, narrow cart to haul tools, firewood, stones, logs. Also to attach a plow to for plowing mine and my neighbors long, steep driveways in the winter. Getting too old to do it by hand. :D ???: Do you think a 200cc engine like this would have the torque and HP to haul 200-400 lbs up trails in the woods, depending on gearing, of course. I don't need too much speed. Torque is more important. I've got the fab skills and welding shop, but my engine/drive-train knowledge is less than zero! LOL! Thanks very much for the videos! Bert

@OscarHernandez-ng7ij Жыл бұрын

It is an excellent work friend, do you have a plan or measurements to try to make one?

@DavidHuber63 Жыл бұрын

That's Awesome Brother 👍🏼🙏🏼

@blackrd66 Жыл бұрын

Dobre! Śmiga aż trzeba za tym biegać 😅

@eformance Жыл бұрын

In your next video you'll be adding a weight bar and a jackshaft to reduce the ratio to the wheels so you don't have to chase after it 😁

@WorkshopFromScratch Жыл бұрын

I made the project at a fast pace because I needed it, I didn't paint the machine, being aware of the many corrections that I have to make 😀

@BinhNguyen-ei4yt 3 ай бұрын

Tôi đã xem rất nhiều video của bạn. Bạn có rất nhiều sáng kiến chế tạo hay tôi rất là ngưỡng mộ bạn. Mình chúc kênh của bạn ngày càng nhiều thành công 😊

@joseedivanrodrigues6087 2 ай бұрын

Muito boa a ideia, ja trabalhei quando ainda criança com arado de bois, fiquei muito surpreso com a ideia. Muita bom.

@Lone-Wolf87 Жыл бұрын

Very useful. Well done again. 👍👍👍

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@ronnyfabian7320 10 ай бұрын

I made something similar but with only one wheel and I don't know if it happened to you but the multiplication of the sprockets is not good because it ends up stretching the clutch and then it advances by itself and does not stop

@ciceropedro7894 Жыл бұрын

Belo trabalho amigo os comentários negativos que têm. Só nos fortalece.👍👍👍

@algkeabd5225 10 ай бұрын

تحية طيبه لك واشكرك على هذا الإبداع لوسمحت نريد المقاسات

@eddierodriguez419 Жыл бұрын

AWESOME BUILD MAN LIKE ALWAYS!!!!! I TELL YOU WHAT YOUR VERY VERYYYYYY SMART & TALENTED 👍🏼👍🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@costinmarius-gr5vf 2 ай бұрын

You have some tools. I think so too, I liked the threading drills the most.

@davidonrrubio Жыл бұрын

Eso necesita un acoplado con aciento compa Y la tierra se ara al reves Excelente!

@skeetorretard 10 ай бұрын

id love to see your pile of starting material before you start a project like this

@user-so5lf2fc2d 11 ай бұрын

По паханому второй раз хорошо идёт. Для обычной вспашки лёгкая приспособа, единственное что можно делать самоделкой это окучивать картошку, но для этого надо колею уменьшить или одно колесо вовнутрь конструкции поставить с грузом..

@patrickcastor4379 Жыл бұрын

Felicitasion mon frère tu es un grand technicien

@joseneriacoemel9825 Жыл бұрын

Show em my friend 👍👍👍👍👍👍

@AlvarroLB Жыл бұрын

Świetny pomysł! mam dwie uwagi. Lemiesz czy tam skibe, zamontowałbym bardziej na sztywno, to raz. Dwa jakby przesunąć ją ze środka, bliżej prawej strony łatwiej by było operować sprzętem. Prawe koło trafiałoby do bruzdy a nie na świeżą poorane pole.

@KennyMcKornick Жыл бұрын

A propos punktu drugiego się zgodzę, z tym że tak mały traktorek mając pług niecentrycznie cały czas by znosiło na bok

@WorkshopFromScratch Жыл бұрын

Dziękuje😁 Na rolnictwie nie za bardzo się znam mimo że mieszkam na wsi, zbudowałem w szybkim tempie bo jest teraz potrzebna, wykona swoją pracę a miedzy czasie wychwycę błędy które popełniłem i później poprawie i dopiero pomaluję 😁

@krystianzbs5462 Жыл бұрын

@@WorkshopFromScratch błędów trochę jest. Posiadając traktorek jednoosiowy wiem jak zrobić żeby wygodnie pracować. Możnaby dać skrzynie biegów od jakiejś zamiatarki na przykład, żeby wolniej jeździło. Silnik mógłby być niżej, i brakuje trochę masy. Przydałoby się dać jakieś obciążniki dla poprawy przyczepności. Ja mam "korpus" napędzający wąski, na dole jest oś na którą nasuwa się koła przez co mogę sobie ustawiać szerokość i na przykład jak wysune prawe koło bardziej w prawo to pług bierze szerzej. Znowu do obsypnika do ziemniaków mam za niskie koła bo 55 cm średnicy i prześwit jest za mały

@itzsamdiy Жыл бұрын

Nice build

@gorandiaye50 11 ай бұрын

Merci pour votre excellente vidéo.

@edgarsiles108 Жыл бұрын

Eres un buen patriota, estas rompiendo el monopolio del saber, eso hace bien a los pobres del mundo, estas escribiendo historia bonita de reinveindicacion humana. Sigue adelante.

@edgarsiles108 Жыл бұрын

El Perú te agradece y te admira. ❤

@siloealves2160 11 ай бұрын

Com boas ferramentas tudo dá certo ✔️ 😂

@be007 Жыл бұрын

nice bild ! but.... i wonder how long it takes to destoy your chain and sproket ? and bigger wheels will also be better for more traction.

@WorkshopFromScratch Жыл бұрын

Thank you 😁 I made the project at a fast pace because I needed it, I didn't paint the machine, being aware of the many corrections that I have to make

@sanguenordestino2522 Жыл бұрын

Isso sim é um trabalho de proficional parabéns, se eu tivesse umas máquinas dessa eu faria para vender .

@kulverhayer6143 10 ай бұрын

Like every body ; Your home has all the tools

@grzywkapg Жыл бұрын

Super sprzęt. Możesz jeszcze go trochę dociazyć, żeby poprawić trakcje.

@WorkshopFromScratch Жыл бұрын

Dziękuje 😁

@adedaelami2528 Жыл бұрын

Wooow goood idea very nice

@kromek16 Жыл бұрын

Witam. Gratuluje kolejnego świetnego projektu. Zauważyłem że brakuje panu rączek gumowych na końcach. Proszę o kontakt a prześle panu w gratisie kilka sztuk gdyż na codzień produkuje różne wyroby z gumy. Między innymi rączki. Jeszcze raz brawo za kolejną fajną maszynę 👏🏻👏🏻👏🏻👏🏻. Pozdrawiam.

@mikebair3672 Жыл бұрын

Nice build but the power would be better utilized with larger diameter wheels. Plowing already plowed soil is not so impressive. Next time plow unplowed soil to see how effective your design is. The jackshaft and drive gearing setup is 👍🏻

@WorkshopFromScratch Жыл бұрын

I made this machine very quickly because I needed it, so there are a lot of things I didn't have time to think about during the build, that's why I didn't paint the equipment because it needs to be refined :)

@briconajib4584 Жыл бұрын

Bonsoir mon amie 💐 merci beaucoup pour le partage de cette belle vidéo intéressante 👍💯💯 merci pour l'explication, vous êtes Un bon tourneur, je vous souhaite tout le meilleur succès dans votre travail, je suis très content de toi, je suis nouveau abonnés dans votre chaîne salutations d'amitié 🙏🙏🙋☕🍫🍬🎉🎉👍💯

@On_The_Farm Жыл бұрын

Awesome as usual!

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@madeingarage7040 Жыл бұрын

I to się nazywa koń mechaniczny😂 Jak zawsze super robota👍

@WorkshopFromScratch Жыл бұрын

Dziękuje 😁

@jawaidtoppa4151 Жыл бұрын

Great invention ❤

@lauly9012 11 ай бұрын

Mai cai da chỉ bao nhào

@zacharywong483 Жыл бұрын

Amazing job here!

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@dutahidrolik5848 Жыл бұрын

Amazing 👏

@yonexkediri8549 Жыл бұрын

Omg.. Terbaik lah My from Indonesia

@ArmedPatriot Жыл бұрын

Damn that's a fast one ain't it

@teguhhermawan6889 Жыл бұрын

Amazing

@user-cq9yy8cx6k 4 ай бұрын

Красавчик! Результат! Автору Респект!

@Vikingwerk Жыл бұрын

Impressive!

@mnarsimha6529 Жыл бұрын

Thanks!

@martinmoraperez751 11 ай бұрын

fantastico eres un maestro.

@gustavoesteves7076 Ай бұрын

Muito capricho na construção do micro trator. Ficou bem funcional .

@DanKoning777 Жыл бұрын

I love this channel-you say more w/o saying a word more than any channel I subscribe to. God bless. Btw am I correct in assuming the condition of the wheels at 12:47 indicate you "took it out for a test drive" and you didn't like what you saw-that's why you moved the pillow block bearings to the bottom of the frame [11:26-11:52]? [edit]: are you satisfied with its performance-do you plan on making any changes?

@WorkshopFromScratch Жыл бұрын

Thank you 😁 Yes, I tested it first, and then changed it, of course, showing where I made a mistake. The machine was made quite quickly because I need it now, but there are a few things that I need to improve and that's why I didn't paint it, but it still works 😁 As for the changes, it is definitely larger wheels, and thus you need to immediately change the sprocket to a slower one because it will work too fast on larger wheels

@alytirogo4209 11 ай бұрын

salut mon boss j'apprécie le travail c'est vraiment génial, je veux voir comment fabriquer le boitier de vitesse

@gmendes1831 Жыл бұрын

Nice job!

@WorkshopFromScratch Жыл бұрын

Thanks 😁

@Elsombrero171 3 ай бұрын

Hello and greetings and work is very nice and it looks great on you and my questions is how much does this machine cost and i am interested and thanks 🙏👍

@vlnoronha7629 Жыл бұрын

Good job

@benjexho2585 11 ай бұрын

What are the measurements of in centimetres of the flame....?Thnks

@petanicabaioficial2375 Жыл бұрын

Nice work kreativ 👍

@user-un2le1eu6i 11 ай бұрын

Nice job.

@Elmuzaki Жыл бұрын

wow sophisticated

@ahmaddhdo8023 3 ай бұрын

Well done my creative friend, I will make the same

@jimsvideos7201 Жыл бұрын

It has everything it needs and nothing it doesn't.

@mikeboeing8188 Жыл бұрын

good job

@paulthain6135 Жыл бұрын

Nice video no music

@juanramosccopa4972 Жыл бұрын

El mejor qe e visto en su tipo

@be.ndover 11 ай бұрын

i want to see you make the plow blade where is that video

@cristeanicolae974 10 ай бұрын

Bravo Man 👍 Good Job 🍺

@MarianCobirlie 14 күн бұрын

Congratulations !

@viques254 Жыл бұрын

Very nice

@rcconstructionmachine Жыл бұрын

you are so amazing

@mddchannel9375 Жыл бұрын

Nice video

@ynieny9542 11 ай бұрын

Làm thế nào để phay ruộng nước bạn? from Việt Nam 🇻🇳

@jeremiahkarunye6854 11 ай бұрын

How do you do when you put on machine and has no gear

@dawidus100 Жыл бұрын

Extra robota ta duża zębatka to od jawy 50 bądź też ogara 😊 nie da się jej pomylić z niczym innym w końcu ogar to był pierwszy poważny środek transportu

@WorkshopFromScratch Жыл бұрын

Dziękuje 😁 Tak od ogara 😁