Wow that seems to work really well. A friend spent a fortune getting a hunting knife sharpener but this looks equally good

Pretty relaxing to watch your videos... Love your self made tools! Great content

Your shop is fantastic! All the homemade jigs, clamps, fences, etc... The sharpening jig is awesome!

From what I can see, this guy is amazing. Almost everything in his wood shop, be built himself. Very impressive. To say the least. Craftsman like this almost dont exist anylonger.

U gave a new meaning to home made as i know some small factories that have less equipment ,resources,and skill power than u do. Nice job

I was planning to buy a sharpening jig, then I remember the scissors had to be sharpen too. Then here comes you video, a nice jig for knife and it works for scissors too. A simple and very useful design. Now I'll DIY instead of buying one. Thank you for your effort. Just subscribed.

Dude this is awesome. Your workshop is brilliant. I'd love one of those

Just a tip. Only stroke your stone downward then lift and stroke downward again. Very impressive jig!

I made this in an afternoon. I used poly carb plastic scrap in place of the steel knife alignment and scissor clamp. Getting the stainless sharpening rod down to exactly 3/8” took the most time. Try to find a rod that is the exact diameter or a tiny bit smaller. I also made a second rod about 6 inches longer which works better for me. A stop nut on the back of the rod is also helpful. Bottom line is that the design works great and is made for next to nothing cost wise. I then bought stones from Gritomatic for another $80. You will also need a digital angle finder.

Просто супер. Автор молодец. Спасибо за труд. Спасибо за чертежи.Дай Вам Бог здоровья и счастья в жизни добрый человек

That looks a very handy jig for making sharp knives. I need one!

That turned out nice.I should'nt have been such a good off in shop class.Learned more aboutsmoke

Outstanding video and your collection of shop made tools and jigs is excellent!

Nicely done! @3:56 is why I’ll never take up metal work as a hobby. The sound of a file going over metal. It disturbs me greatly. Never knew why.

A drop of 3 and 1 or any oil on metal as your drilling into it works wonders. You drill faster and keeps heat down so bits last longer. Someone tipped me this years ago so I'm paying it forward.

Fantastic job !!😉

Красивая получилась и точит хорошо.

Hey Mazay. Great video. thanks for sharing.🍁👍👍

Merci beaucoup pour la vidéo et les plans

I made the device that holds your angle grinder and all I have to say it's been the most used tool used for cutting. Thanks for the ideas and videos you provide for everyone.

Spectacular work, I am assuming that if the knife holder is at 15 degrees, the bar that holds the whetstone is parallel to the table?

Brother, your jig and tooling game is impeccable! You've earned a new sub.

That second to last cut with the rolled paper, wow. That is scary sharp! Fantastic work sir! Just, wow. I've seen $1500 sharpening systems not get close to that level of sharp. That has to be like 25 or 40 on the sharpness index. I can't express how impressed I am. Really well done.

Осталось дело за малым, сделать кучу вспомогательных станков и после сделать приблуду для заточки ножей. Элементарно, Ватсон.

awesome work, thanks for sharing

Шикарно, умница!!!

У вас золотые руки и конструктивное мышление

There is no doubt you can get an edge on any blade! I don't think I could build this cause I don't happen to have a broke printer, I guess I will have to stay with bench grinder. Thanks tho, you did an amazing job!

Excellent job!

За станки отдельное уважение ✊

Nicely done!

Easy to make a homemade copy of an in-use design. Quite another thing to start with a blank sheet of paper. Do you find the Sawing method works better than Out vs In? I did enjoy the video.

great video wish i had the resources to make that, a dream sharpener, take care, new subscriber

Very impressive and thanks in advance for the plans, just a question and hopefully if not you someone can answer what are the actual things to sharpen the knives called?

I am going to make this. thanks for the vid.

Great. I like your guide

Excellent 👌 👍👍

this is a nice jig 👍

Could you provide a link to those sharpening stones? I've found some on Aliexpress, but not going very high grit, and definitely not a leather one for final polishing.

Well done. How are you judging the edge angle?

Hi. Do you use diamond plates or sharpenning stones? And to which grain size do you sharpen before you use the leather? What paste do you use on the leather? Thanks in advance for your answer. By the way I also love the style you do your videos. Great. Thanks a lot for inspiring.

On my to do list. What is the plywood material you used? Available in US?

Красивый результат! 🎉🎉🎉🎉🎉

Лайк за ваш вариант универсальной точилки! Для кухонного ножа у вас угол выдерживается в пределах 25 - 30 градусов. Но, по моему мнению, лучшей заточкой кухонных ножей была бы радиусная заточка поверхности лезвия, которая в разы повышала бы стойкость остроты лезвия ножа. Ведь тонкая режущая кромка при "малой" твердости материала ножа заворачивается, при "большой" твердости выкрашивается. Радиусную заточку поверхности в зоне режущей кромки можно получить с помощью рычагов на точилке. Я уверен, вы сможете сделать и многим ваша конструкция сможет пригодиться. Здоровья вам и удачи!

Просто oxyeннo... смотрел с удовольствием..👍

Так сложно, черезмерно замудрено. Терпения не хватит досмотреть до конца, а сделать такое чудо тем более.

The diamond plates, the grinding stone and the leather plates all have different thicknesses. So I assume the angle while sharpening hast o be adjusted depending on the tool you use. Do you also do this?

Brilliant jig, just one thing, I dont understand how those plates hold the knife down?

It's not about just putting a keen edge on the blade but putting the correct edge for what's being cut and an edge that will last more than 3 cuts.

Отличный станочек, 🛠️⚙️🔩

Я конечно,с уважением.но использовать такой инструмент,жара.автору респект.

Конечно своими руками так сможет каждый, ведь у всех есть эта артилерия профессиональных инструментов......

Muito bom.parabéns

What did you use for the magnetic-base..? A plastic magnet? Seems neodymium strong ... or is the strength just a product of its size?

very good idea

0:01 - 0:04 Those cuts make my traditional stone sharpening look like the work of a novice...

Thanks for sharing

Amazing construction, congratulations. One thing is not clear, sorry if this is a stupid question: what is the purpose of the vertical plate at the front?

Посмотрел, оценил наличие инструмента, достал надфиля с напылением и поправил все ножи до уровня бритвы.

Love ❤❤❤❤❤ your content so much. I wish dearly I had cross your clips way sooner. Your clips are pure GOLD. God bless you and God bless Israel. ❤❤❤❤❤

Hi is possible buy in of this sharpener by you ? What’s the grades of stones that you use ?

Идеально.Prefect.

Brillante😮

Invidia pura...grande lavoro!

Обожаю когда пишут своими руками🧐👍только потом нужно ещё 3 станка,фрезер и ещё опыт 20лет👍

Hi. What is the advantage of tilting the support of the knife as compared as to just positioning the knife completely horizontaly and giving the total angle to the rod?

Tks for video I will made one

I will make it for sure. Very nice sharpener, not too big as others. Thumb up and sub for you. PS: Thanks a lot for free plans.

Beautiful work. What is the piece that came in the little green box called?

In my case the the rod end bearing has to be drilled to an diameter a bit bigger than 8mm since the steel shaft of my old printer has a diameter of also 8mm and I wasn`t able to mount the shaft in the bearing. And for sharpenning it should glide really smoothly. Think it`s easier to open the bore instead of grinding the shaft...;-) Did you have the same problem?

В конструировании точилок для ножей мы с вами идем удивительно параллельными курсами! :) В своей первой версии у меня был аналогичный, до полного совпадения направляющий узел и стойка из шпильки и столик очень похожий. И стекла с наждачной бумагой - наше всё :). Во второй своей версии я от шпильки ушел - низкая жесткость. Сделал портал по типу козлового крана и направляющую сделал из продольного подшипника на карданном подвесе... Вам, возможно, в свой станок стоит добавить крючок, для паковочной позиции и базу для угломера. Поправьте меня, но на второй версии стамески точить уже нельзя.

Thanks Mazay

와우.....멋져! Oh........Gooooood!

Простая, добротная конструкция без излишеств. Особенно понравились упоры обуха для симметричной заточки лезвия с обеих сторон. Скажите, для чего нужна стальная пластинка спереди (13:05)?

Здравствуйте. Замечательное приспособление аж хочется самому зделать . Немогли бы вы поделится чиртижом если он есть ?

А я думал, чего мне дома нехватает... Оказывается токарника, гриндера, циркулярки с торцевой, чтоб не тратить 25 баксов на китайскую радиусную заточную систему, а слепить ее самому 🤣

Is there any particular 📐 angle that the wedge is at ? No one says what degree to cut or set the knife rest

Точилка и плюс маленький цех ценой в тысячу точилок.

hadé pisan euuuy... urang nyieun ah...

Are all your tools hand made for the most part? Table saw,planer I can see the thing that holds the angle grinder is are the rest similar? The look to he for the most part

Specialista 👍

What do you call that part that lets the rod move freely.

Gracias

excellent

Great job, I enjoyed watching the build. Man, some of those cuts you made on the table saw to smaller parts made me cringe a bit.

Could u please make a simple one? I have not enough tools and experience like u

With such a set of tools, machines and equipment, is it called your own hands? Funny. This is a real factory.

Отлично у вас получилось,на заказ делаете?

Подскажите, какого размера магниты вы использовали и какое у них сцепление?

I want one!

When you say HOMEMADE, sounds like it´s in my home, man i have no the kiand of equipments like a Workshop

Cool thanks

You หาซื้อหินลับมีดจาก shopไหน

Не подскажете какой длины у вас вал от принтера ?

ролик нужно назвать: точилка для ножей своими станками

Which sharpening stones do you use, do you have a link for them? Thanks!

How do you set the blade angle? Is it the height of the guide on the threaded rod?

Лайк то я поставил но вопросы остались, почему при наличии распиловочного станка фанеру под углом надо пилить ручной пилой? Когда делал пропилы ножовкой по металлу, я подумал нет УШМ как в следующим кадре работает болгаркой, при наличии УШМ скосы на металле делаются на гриндире. Замысловатый весьма подход к контенту.

Замечательное видио! У каждого нормального мужчины в кладовке должен быть подобный набор станков...

Could you please share the dimensions of the grinding machine?