Homemade Lathe Chisel - CHEAP & Easy

No video

Homemade Lathe Chisel - CHEAP & Easy

Рет қаралды 15,296

Күн бұрын

In this video I'm making a simple skew chisel for the woodturning lathe.
Most people use files when making chisels but I don't think they are suited for the lathe, because they can snap easily in case of a catch.
Since I know it's pointless to make a lathe chisel if you already have one, I'm using the skew itself to turn the handle for it.
I hope you find the video useful!
00:00 Intro
00:37 Making the chisel
04:15 Making the handle
10:19 Final assembly

Пікірлер: 37

@CharnavinT.Charnuvanik Ай бұрын

You'd better hope that shaft doesn't snap when you get a catch. That hammer drill chisel is not designed for those types of speed. I would recommend anyone who wants to use a lathe should buy the right tools. It can be a very dangerous piece of machinery especially with a home made tool.

@joepeanut6827 Ай бұрын

Well little guy, some of us like to live on the edge. I for one ride a motorcycle, sometimes without a helmet. I bet you were a helmet when your in your car with the windows rolled up wearing a mask.. Come on man, get out there and enjoy life, don't be afraid to try new stuff, even if it might hurt you. life's to short to be afraid of thing's..

@CharnavinT.Charnuvanik Ай бұрын

@joepeanut6827 thanks big guy for the Belittling comment there, big guy. I do just fine on my tricycle wearing my helmet. The thing is, you can smear your face across the pavement after it is ripped apart from your handle bar by not wearing your helmet all you want but to go and tell somebody else to do It is foolish. But that's not what this is really about big guy. This is about putting out bad information online for anybody to view it Big guy. A Lathe is not something to f*ck around with big guy. Thanks for your input Big guy. Have fun on your sportster softail delux😘💅

@joepeanut6827 Ай бұрын

@@CharnavinT.Charnuvanik The part your missing, is it's made out of a chisel, and chisel's are made to be hammered on and they flex a little bit. it's not a file where its rock hard and will brake if you drop it. everything is fine calm down.

@CountDoucheula Ай бұрын

I've seen a chap make paring cuts like this before with an axe and a Bowie knife. This tool is absolutely fine for it's purpose.

@andythenurse67 Ай бұрын

@@joepeanut6827non helmet wearer, or as we in ED call them, donors.

@ThePracticalPeasant Ай бұрын

I also use a very similar chuck and spur drive on a similar sized lathe for handle-making purposes. I've discovered that the (my) chuck can hold the spur; as long as I don't need the extra couple inches of length, I don't need to keep removing the chuck when switching back and forth. You slide it right in and the chuck collars it and locks it in place, unable to rotate or slide backwards. Within the (power) capacity of my Rikon 70-220, turning handles up to the size of the one in this video, I've had no issues.

@MrKozure Ай бұрын

Always love your video where you make your own tool, the final result always look great, please do more of this kind of video. 👍

@TheSmallWorkshop Ай бұрын

Thanks, I love making my own tools so I'll probably make some more videos like this.

@noned12 Ай бұрын

I was scrolling when i saw your notification, i clicked on it as fast as i could 😂

@MrKozure Ай бұрын

Same here. I hope he finds the time to make more video.

@CrustyRestorations 25 күн бұрын

Stunning work, and love the mallet aswell👍👍

@TheSmallWorkshop 23 күн бұрын

Thank you!

@boggysaurus 26 күн бұрын

hey man, idk if you'll see this, but i've been watching your content for years. i started watching you on my old account, and after seeing semi-regular uploads again lol, imma subscribe. i love the videos and i fall asleep to them despite the loud noises 😂. your channel makes me wanna pick up workshop stuff, and as a teenage girl, i obviously cant invest in one, but my uncle has one and we work on knives and rings together. you're channel had been a big inspiration and the content is amazing!

@TheSmallWorkshop 26 күн бұрын

Welcome back and thank you for the nice words!

@MASI_forging Ай бұрын

Beautiful piece of work 👏👏

@TheSmallWorkshop Ай бұрын

Thank you!

@MCsCreations Ай бұрын

Fantastic, dude! Really well done!!! 😃 R.I.P. file... F Stay safe there with your family! 🖖😊

@TheSmallWorkshop Ай бұрын

Thanks! You too!

@christopherleblanc9599 Ай бұрын

great idea for the cutter metal source , ill have too try one,,, but i think ill go more of a sweep angle ,, so i wont have to contort my wrist so much and a shallower angle for the edge ,,, thanks

@larrykelly2838 Ай бұрын

Very nice

@TheSmallWorkshop Ай бұрын

Thank you!

@TENZEN._. Ай бұрын

Man, my friend you do AWESOME WORK! ⚡️💥🧨🔥🗿👊😎🗿🔥🧨💥⚡️

@TheSmallWorkshop Ай бұрын

Thank you! Cheers!

@AndreiIR000 Ай бұрын

Bravo!

@TheSmallWorkshop Ай бұрын

Multumesc!

@leylafa9077 Ай бұрын

Eating a watermelon while watching your video, just overall a very nice moment ❤

@TheSmallWorkshop Ай бұрын

LOL!

@jnub Ай бұрын

thats a really big chisel. looking forward to all its cameos in future videos you make. by the way, what happened to your second channel?

@TheSmallWorkshop Ай бұрын

This video was meant to go on the second channel, but that channel was not "noticed" by youtube, videos only got views from a few hundred people coming from this channel. So it seemed kinda pointless to put videos there instead of the main channel.