This is one of the best splitters I have ever seen!!! Very efficient. For one person, your production is excellent. Looks professionally made. Really good job on a nice piece of equipment.

This is the coolest wood splitter I have ever seen. Excellent job and incredible design. Bravo!

If that machine is "home made" you are an exceptional example of home-builders. That is one sweet machine!

Sehr schlaue maschine! ich würde noch einen Bügel machen der die Stämme selber zurück zieht, somit muss nur noch das neue Holz beschaffen werden

A log sack and holders either side would be good, as would the retrieving fence as mentioned elsewhere here.

It's an awesome knock off of the Tempest (now Wood-Mizer) log splitter! Just wondering how the main cylinder works in both directions? A normal splitter retracts on it's own once it finished the stroke. I would love to see the inner workings of the machine and possibly the valve and how you have it automated. Any chance on a follow up video?

That's a nice log SplitterI like that I'll be watching more of your videos Stay safe have a good day🎉🎉

Great work. That looks as professional as any factory would make.

The best splitter on the net by far. Absolutely awesome!!.

Really smart using both directions!!! Now use a Peavey to roll the logs and save your back.

Amazing ! If you would weld on a log retriever on top of the blue moving part in both directions, you would have almost a fully automated system. Just put the log on and wait for it to be completely gone automatically :D I would love to have that auto cycle, but since it's Arduino based it's not in my range of expertise unfortunately.

Excellent Job!! Have any pictures of how the push plate is mounted to the cylinder?

The only thing we are planning to add is a knee ESTOP. (For other comments). But a "drag back" could be added so the log comes back itself so you have more time to set up the next cut. I could split enough firewood in one day for an entire season with a machine like this!!. Was the rod used on the main ram a fork lift double actuated rod or a longer telescoping rod design? I have CAT excavator rods laying around, longer single stage. This design is very compact, bonus, bonus, bonus. Also adding the connecting points to the outside is an excellent idea. Also two smaller cylinder could be utilized and mounted on each end, giving support to both ends of the splitting block. Some of my 300 ton machines use two smaller rods, others use one large rod.

You need to add two moving fences to pull the log back for you.

This is the dad of my friend. Very proud of them both.

love the automated function of the unit fast and easy.

Double the fun. Very nicely done!👍🏼👌🏽😊

man! that splitter is slicker than snot on a glass doorknob great design you should put it on the market

That look like it was factory built; Great Job. Very Nice easy working unit too

Best splitter I have seen yet

I like this design, what kind of wood was that .. very stringy!

Would it be possible to get an updated video with the modifications and also film on the underside to see the construction?

Very good design making it fast without much more effort, but I feel it needs a L-bracket to pull the unfinished logs back into the splitter until finished, which will make it even easier and faster. Great design though.

That splitter is awesome, i need to buy it from you

Probably the best yolk iv ever seen to be honest, awesome

i love your old tractor grate job

This is nice I guess if you like predictable dimension splits....Ahhh who am I kidding? Awesome! and provides built in kindling and some garden mulch as a bonus.

Beauty. That's some good production.

Excellent machine. Now, the only thing lacking: how to get the split pieces neatly organised (automatically) into a retaining device of some kind (bucket, pallet etc)

Mooie machine, ik heb een gelijkaardig systeem. Heb je al is beuk en eik geprobeerd?

Awesome splitter!

do you have some plans about this wood splitter... i want to know how you have done it with the hydrolic cylinder. I see the you have a Belgium number plate on you tractor. maybe it is better to conversate in dutch. Thank you very much.

This is similar to mine. I watched very closely when I built liggetty split. This machine is sweet!

Very nicely made and well thought out.

Don’t get me wrong.... what a fantastic machine!!!!

#684 is a real ball busting productive unit. Something like this would work well for many years for many family members. Oh yeah forgot to mention this is Alaska USA baby!😘

How did you make it fully auto ? You should mass sell these I'd buy 1 forsure

Can you make a video of how you engineered it and what you would’ve done different if anything? I plan on building one very similar and would certainly appreciate any help thank you. Robert

I like the fact that it splits both directions. Less work and more wood split.

This is a Beast! Damn nice 👍

well done sir well done efficent best ever

Really nice efficient machine for single handed splitting, the only thing i would add would be an emegency kick bar/plate to stop should something go wrong. I see the emergency button but its out of reach depending on where your standing, a kick pad or bar reachable from any position would be better and give peace of mind too. hope you never need to use it.

The auto cycle makes this very efficient. What type of switch system do you use to get the auto cycle? It looks like it has a two or three second delay before it reverses the cycle. That is the best setup I've seen.

Now that's impressive.

I've split 5 cords through it so far. Does what I need it to. kzfaq.infoUgkxUyQswtttSffRMblGbrhCvZn7JkhtG1-7 I scrounge all my firewood and am not equipped to handle big wood, but for logs up to 24 inch diameter or so, it works great. I've been amazed by some of the gnarly bur oak and elm crotches it has split. For the tougher stuff within it's size range, you might have to study the piece a bit to decide the best attack, but if you split smart it's up to the job. It did arrive low on oil, and I was would have nicked it half a star for that, but it has regained my full confidence. UPDATE NOVEMBER 2021: Still going strong after all these years. I love the one-handed operation. Hope it's still in production if I ever need to replace it

That guy should get a job at NASA.......WOW ...thats a splitter

Love your splitter. What kind of tractor is that?

Do you ever have problems with cross grain wood getting stuck in the box wedge?

think smart not hard good engineering idea

dam great job really cool

This is the champ!!!!!

Nicely made and well thought out however, I must comment on the safety issue at hand. With this machine in automatic mode it would not take but an instant to remove a finger or two. Have you thought about installing a KILL SWITCH near your knees so if it does catch a finger and/or hand you have some means in which to reverse the process before complete amputation? Just a idea!

what kind of ram are you using. is that pump a single stage pump or a 2 stage pump.

That is just awesome. I want one

I am trying to understand whats with the 58 dislikes? The only thing i can see is not have a return bar to pull the log back automatically. Other then that, its awesome

How does one get in contact with you?

Wow! Ingenious!

So efficient. No wasted movement.

why do these box wedge splitters make the wood so ugly splintery?

Valt me nu pas op dat dit in Belgie is .... vanwaar (welke regio) bent u in Belgie ?

holy shit this was so smart! build one to, have film on my cchannel! :D

kool..if it was really long..you could make your own 2X4's..

I will sell this in the US start making them for me.

That's efficient!!!!

Hope you are wearing ear protection........I had to just to watch the video 😂

And here it is, dumping the split wood onto the ground. I will never understand as to why , they do not have a wheel barrel at each end.

Clever

Productive. But makes one hell of a mess!

Sure is faster than my maul and wedge...

awesome.

if u can put a 2 sided pull back on hinges that would b it!

very very good

nice !

Genius

Nice Splitter, just subscribed, 🚜🪵👍🏼🇱🇷

That is the balls!

good design and all....but you design it so you don't have to pick up logs from the ground.....and then allow the split wood to pile up on the ground....how about putting a trailer or bin at each end to catch the split wood?......

home made ? this sure looks like a tempest log splitter to me.

very nice

👍

Nice idea, but makes to much waste.

Looks like a copy of the Tempest splitter.

Homemade?! Unless the company you bought this thing from is named "Homemade Log Splitters LLC" 😏

I like it in one way, but it makes allot of splinters.

Do you want to sell the plans to build this?

Only perfekte 👍

I know of a wood ministry which provides free firewood to the truly needy who depend on wood for heat, I'm SURE they could use a machine like this.

We all love kindlin wood, but this splinter creates to much of it.....

die Technik ist ok aber gibt Viel Abfall

Veeeeeeeeeryyyyyyyyyyssssslooooooooowwwwwww.... Were's second gear?

Too slow, need more flow, better off split one way and pull ring back on retract with an arm, more efficient and less manual handling of rings.

viens nous rejoindre sur notre forum sechaufferaubois il y a plein de constructions personnelles

bravo pour la fendeuse is top

Сколько грязи от калуна от бензопилы меньше телега чурок и утонул в шелухе.

All that work... just split the whole damned round at the same time jeepers. Not difficult with hydraulics.

Total carbon copy of a Tempest. At least give credit where credit is due.

Много мусора.

Langsam und uneffektiv... Da gibt's deutlich besseres!