Thank you for the link back to this video. Great job building this.

One of the most dangerous things I have ever seen, I love it.

How can anyone with any mechanical ability not like what this man built. Yes I know he did not invent this type cutter but, he did manage to make his own. He should get at least a thumbs up on his machining . Yet alone it works!

New test of rotary mower kzfaq.info/get/bejne/bsl3m9yL29jVXZ8.html Build of a mower kzfaq.info/get/bejne/m6uqgM-W0JvXgHk.html First test kzfaq.info/get/bejne/i5ynpaqCzNTSdXU.html

Thank you for the demonstration and the video.

Nice job with the fabrication, I'm impressed

Nice job...would like to see it run

awesome build I subscribed to see the rest when you get it going thumbs up

impressive work of craftsmanship

Such a cool machine. To bad we didn't get to see it in action. If the belt slips will the cutting blades hit each other? I experienced something like that on a factory build machine. You should consider a pivot point between the green and yellow part to make it work better in uneven terrain.

Thats pretty neat but I wish we could see it working as well

Druze,ovo je rotaciona kosacica nije tarup 😊 uostalom svaka cast 👌💪

Great thing!!! But we need to see it in action, right?

Well Done!

wow all them toys to play with to make things leaves me out

Super meserias bravo lor 👍

What do you have for skids under the drums?

That is some crazy looking machinery there man, i am thinking it doesn't work well or the video would be a tad longer with a demo of some sort. LOL The tiny blades are really odd. anyway. ya got me to see this I guess.

Dang Dude, KUDOS! That's a lot of engineering and machining! Nice Paint! Already trying to figure out how to improve upon, wider swath, additional cuters, two-ended skid plate, etc. How does water drain from the open standpipe? Cheers!

Excellent work,well done .But let's see it doing the job you built it for !!.I think there may be a small problem , if the belts slip allowing the knives to touch each other

Молодец просто.

Trabalha muito bem! Esse torno também foi você que fez?

awesome but I wanted to see it in action

дело мастера боится! лайк!!!

You should also have the proper safty equiptment for whatever product you are using

Mistrz,kosiarka super ale tokarko frezarka nie gorsza traktorek też fajny daje suba

is a good work!

How often is it necesary to change the twisted belts?

Well done thanks

only problem I see is the blades hitting each other when they get out of time(belts WILL slip). A little stagger like a lawn mower deck would prevent that.

the crossed belt will be fine. i have used machines designed like that and have reversed conveyors that way they run many hours. nice work!

SMFH....nice but show it doing what it's supposed to do.

In Ireland you would get one them mowers for nothing under a hedge somewhere. Them rotary mowers were being buried and scraped

*лайк отличная коса получилась я тоже люблю технику и начинающий Bloger KZfaq*

So does it mow?

where did u get the universal joint at 5:30

до первого муравейника!

супер получилась косарка А фрезер у вас саморобний?

how to plant it on an ATV if you can eat then I will be very glad to share your thoughts

extraordinary

Просто супер молодец

Cool concept BUT the belt won't keep blades in time and the cutters will be banging in to each other. Thats why commercial machines use gear drives to the arbors. You'll have to widen them out until the cutter barely miss and set the bar to trail at an angle so it will cut between the cutter heads , or make a timing gear set-up.

svaka cast

Please let us see running this thing... :D

Доброго времени суток! Спасибо за такую простую и эффективную конструкцию. Скажите, пожалуйста, какой ширины получается прокос?

as the swinging blades are so close - what stops them from hitting each other?

smart man

👍

Will you show me how you work?

Tarım aletlerinin içinde cıbıldak karıların ne işi var koymazsanız sevinirim

Nice

Молодец

Bit of a major mistake not leaving enough blade clearance between the discs, not to mention the danger of no cowl, what happens if a blade brakes or a bolt comes off....law suit.

awww there there.... it's ok... you're allowed to talk :o) It would probably make the video better if you learned how to say something while doing the videos like even basics of why you're building it

Kann man das auch Kaufen?

Please show us working on grass or hay

Ефективно! Клас

Молодець! Як служать ремні після сезону експлуатації ?

👌👍👍👍👍👍👏 Класс

👍👍

Super

👍👍👍

Hello, please drop in the drawings with the dimensions. I really need it at home.

на это есть двухсторонний клин

Cum pot sa văd când faci proba

If that thing runs more than 5 minutes at speed before that crossed belt eats itself, I would be shocked.

Jeśli pasek nie będzie dobrze naciągnięty Dobrze mi się wydaje, że ostrza mogą zajść jedno na drugie jak się koła nie zgrają?

Выглядит сурово

Cit au discurile in diametru???

:)

por favor si vc pode entre em contacto com migo que fazer um torno do mesmo do seu obrigado

Very good

can you tell us what size the shaft is? you can give us some drawings?

👋👍🤝

закиньте пожалуйста чертежи с размерами

I wouldn't call this "homemade" shop built would be a better description.

Das ist ein mähwerk

Do u have project of this mower?

Mouse at 1.54

Beautyfull💪💪💪👍👍👍🇷🇸🇷🇸🇷🇸

Na nízkou trávu snad dobrý .

Resenje sa ukrstenim kaisem nije najbolje jer ce u jednom trenutku doci do udaranja nozeva. Vec su to neki radili i lose se pokazalo

Добрый день! На своём канале о минисельхозтехнике мы ведём рубрику: «Пятничный дайджест интересных видео». В очередном выпуске хотим презентовать зрителям часть Вашего видеоролика. В описании видео будет обязательно размещена ссылка на исходные видеоматериалы. Мы уверены, что благодаря нашему видео и размещенной ссылке, Ваше видео получит дополнительные просмотры, а канал подписчиков. Надеемся на дальнейшее долговременное сотрудничество!

For museeooo😂

А как увас натяжка ремней

Be careful with those homemade products cause they dont have the safty features as store bought ones do so spend a bit more money on a store bought one and be safe

І як я таке прозівав? 👌👍👍👍

Ima li neko nacrt kosacice

Конструкция рамы слабая!

What you making let me know I'll get you one ok

A ile. Ci za to wyszło gdzieś

это что самодельный станок?

Доброго времени суток. вы по русски разговариваете?

And........

Beautiful ... Just a shame that it does not work.

I want to see it cut grass

hahaha

What are you doing From 0:29 1:35

waste !

You should have stated at the start that you wont show how it runs! Wasted my time waiting for the testing. Wont do that again.