Thank you for your patience. It worked amazingly without plasma but is Too old and will upgrade my new design and easy then.

Thanks for your comment and will upgrading to the grinder soon because can help me more thing

Thanks so much for your kind comments about

Thanks you you too for Watching

Thanks

Thank you for reaching out. I have done some machines because this

Thanks my friend

Thanks for your patience to watch my video

Thank you for reaching out. I have done some machines because this

Thanks Is not perfect at all but I will definitely try my best,

Many thanks for your comment on my KZfaq video

Thanks for your comment

Thanks, I have done some of my machines because cutting the slider worked great with the big pieces thick metal. Now a bit old so I will build and upgrade new one soon

Thanks for your comment

Thanks bro 😎

Thanks your comment and sharing info together, I do made angle grinder I focused big pieces and thick metal cut because impossible to purchase plasma cutting track , but I have angle grinder it making me had done good job too. Thanks 😊

Thanks for your work, let's build this because my workshop has done a great job with it. I knew nowadays very easy-to-use plasma cuts almost everything, but my place how have lived here is very poor quality so nothing. So only this helpfu. Thanks

@@mr.ranyhomemade2466 one of the most appealing features of this method of cutting sheet stock is by not using a torch or plasma cutter it minimizes warping the metal .

so he can move it aong the x axis only as things stand. Vertical slide for smaller (worn) dscs as another comment says, or z-axis, and y axis for use of whole of table. the se are good points but maybe he did not need thoise. Also makes the project considerably more complicated.

Thanks

Thanks for your help me to watch videos and I do hope you like it. I knew my work seemed to slowly cause budget and tools as want is not easy to find out and I am living in the third of World so everything I made most of my brain because things not many over here. If you enjoyed please help like and comment and sub for my improved next project.

Thanks

Thanks for your comment

Thank you

Thanks This slider cut the best my project

Thank you for your interest and comments

Thank

Many for your comment we hope can share info together

Thanks your comment and sharing info together, I do made angle grinder I focused big pieces and thick metal cut because impossible to purchase plasma cutting track , but I have angle grinder it making me had done good job too. I do have clams protected metal as l cut angle grinder run perfect. Thanks 😊

I built a simple saw table with the angle grinder mounted underneath yesterday. The grinder blade is spinning away from the side I push the part in. I completed it and used it for the first time today. I built it using 18mm MDF. I designed the table "on the fly", with room for (1) access to grinder switch underneath, although I switch at the wall, and (2) blade release for blade change. It is very effective, and necessarily robust. So far I have only tried cutting 4mm thick aluminium plate into 10mm wide strips. With my design blade change is easy. I can now make aluminium strips easily and accurately. Glad I built it, making these strips is now much easier. Thanks for the inspiration :) I will post up basic video if I get a moment.

Thanks your comment

Many thanks for your comment I’m so happy to share. Well, the bearings I used diameter 8mm in, 25mm out but you can use anyway as you want with bolt and the pipe 4*4 and the bed 120cm*60cm. It help me do a lot of work, Lathe, Chop Saw Cutting Steel, Belt Grinder, and Drill Press and now I'm planning to make a milling machine so I just upgraded cutting edge slider to slash cut. kzfaq.info/get/bejne/obSjoLGHsNGalIE.html. Thanks again

Thanks 🙏

Thanks

Many for your comment we hope can share info together 🙏🙏🙏

Thanks for your comment on my KZfaq video. It was amazing and helpful for my work and had done more things with a guy especially to cut plates thick metal. and will be upgrading more to be easier soon.

Thank you I'm not sure you mean please

Thanks my friend Of course it really helpful especially I using for cut thick plate metals

Thanks for your comment

Thanks

Thank you Recommended. Is not easy to find. But I'm happy with it helps me a lot to have done some machine

@@mr.ranyhomemade2466 they are used on gates. Very cheap. 2 dollars usd each. Even in Philippines easy to find

I do love it because all my machines as I made because it

Thanks for your best time Now I just updated new much easier than Making A New Slider Angle Grinder Cutting Edge kzfaq.info/get/bejne/eZuUZqZjyp-2kps.html

Thanks you

Mua được chưa bạn

Thanks for sharing and your comment I thought is not perfect at all but it helped me a lot to next project especially to slide cutting big plate metals are like homemade lathe, chop saw welding table and more, I want make equipment to be good but in my country is not easy looking for and cost so expensive. Thanks again

Thanks 🙏

Thanks for your recommendation I knew not that good because I haven’t enough tools and not that strong sounding audio all my videos as I did just by phone and upload by phone I needed more equipments but Budget...? I really appreciated your comment

Thanks. I living in the third country so everything is not perfect cause by hand

Great start God bless

you can make something useful then...😂

Thanks for your comment

Thanks for your best watching. I do love my homemade but everything that expectations is not sound the plan because I spend over my budget compared to my income and hard work because don has any tools and equipment. Now not sure keep doing it or not. Thank you again