Thanks to Hone for sponsoring this video! Go to honehealth.com/hometown to get your at home assessment and doctor consultation for only $45.
Пікірлер: 397
@HometownAcres2 жыл бұрын
Thanks to Hone for sponsoring this video! Go to honehealth.com/hometown to get your at home assessment and doctor consultation for only $45.
@springfieldfarm16952 жыл бұрын
I love how you & your neighbor have become friends!
@robertsteen86852 жыл бұрын
Neighbour Doug is a perfect name and description. It encompasses all he is, no matter what he does. From work to entertainment to helping with the pond, mower and everything else
@ricka54712 жыл бұрын
A good name for neighbor Doug could be Douggiever. Great video with alot of thought on different cutting & spliting tech.
@nickk40102 жыл бұрын
I'd say " Do it right Doug" may be a fitting nickname for neighbor Doug. The guy is the living example of being prepared, thinking things out and if you are going to do it, you may as well do it right.
@blueberryridgeoutdoors2 жыл бұрын
Invaluable having a neighbor that is that handy and willing to share his ideas.
@Willy129272 жыл бұрын
New garage? Decide how big you think you will need, double that, and then add 10% and your building should fit your current as well as future needs. It took me 50 years to learn this.
@marcuswhite36282 жыл бұрын
It has to be “DYI GUY” - perfectly describes him. Great guy and a wonderful neighbor!!! Marcus from Chesapeake VA.
@dvasymmetry96962 жыл бұрын
DIY Doug
@robertsnyder51932 жыл бұрын
Tinker, somebody might think that a tinker means somebody that peas around but I believe historically a tinker is the original engineer. Blessings neighbor Doug.
@JLC242 жыл бұрын
Good morning Adam, The Answer man, or Ans man, try a bingo dopper to mark the logs when measuring longer lengths , enjoy your channel, the pace, your cadence, and humble approach
@stephenrickettsNL2 жыл бұрын
Love the car tire idea. Great name for Doug is "TINKER" He is always tinkering with something.
@timothydarrow94742 жыл бұрын
After I saw your magnetic pvc marker I simply took an extendable magnetic pickup tool and marked it at 16 inches. Works great and is easy to collapse and stick it in my pocket.
@OneEyeCustoms2 жыл бұрын
I love that idea!! Thanks for sharing!!!
@zjedinite10 ай бұрын
That’s a good one bud! I might just steal that one 🤙🏽🤙🏽🤙🏽
@Pyromanemac6 ай бұрын
Fuck, I have one of those sitting in my junk drawer, that's perfect. Last haul of firewood was awful sizing. Anything from 8" to 20". Definitely grabbing the magent next week.
@TheFiremanJoe2 жыл бұрын
Wilson. From the TV show Home Improvement, he was always full of wisdom and great advice.
@johncollins5002 жыл бұрын
Great neighbor Doug is what I would call him. Wonderful person.
@kenmatthews64762 жыл бұрын
I would add a screw into the magnet then add a piece of a wood dowel in the conduit to screw it in.
@thebigkahuna27532 жыл бұрын
Regarding neighbor Doug's new nickname. One of my favorite shows on TV was Home Improvement, and neighbor "Wilson" was always on hand to give Tim and the family wise, reliable and topical advice and/or information on any subject. I think that this suits Doug to a tee, and is a fitting memorial to Earl Hindman, the man behind the fence.
@dannys8132 жыл бұрын
I think neighbor Doug is perfect..it rolls off the tongue nicely. Also it reminds me of what being neighborly is all about. Doug seems like a very humble man.. always willing to be neighborly. As far as personally, I would never be considered a MacGayver...but I am always considered a neighbor... Neighbor Doug reminds me to be a better neighbor myself! 😊
@davehogan47762 жыл бұрын
we"ll have to work on the name for Doug! But I still say he needs his own channel!! Awesome job as always!!
@craigsudman45562 жыл бұрын
Hey Adam, I asked Ann what she thought about a nick name for neighbor Doug and Ann came up with, "Mr. Fix It". My suggestion would be, "Do It Doug". Great video thumbs up.
@tbroome042 жыл бұрын
The PVC pipe trick is the best way I have found. I glued a wooden dowel inside the PVC pipe and then drilled a pilot hole in the wooden dowel center. Then attached the magnet to the dowel using a recessed screw. I painted band lines on the PVC pipe at 3 different lengths. 1 for fire pit, 1 for fire place, one for wood stove.
@renem64412 жыл бұрын
Neighbor Doug is the neighbor we all should be!!
@LiftRanger2 жыл бұрын
Great video and ideas, guys. Old guy here: the predominant reason we cut firewood to 16" is 3 rows of them 4' tall X 8' long makes a cord of wood. In the old days, firewood was sold/priced by the cord. Keep up the good work.
@thomasgreene57502 жыл бұрын
The tire fixture without the sidewalls also doesn't collect water, which can be a breeding ground for mosquitos in the warmer weather
@OneEyeCustoms2 жыл бұрын
You are absolutely correct!
@Plrbear982 жыл бұрын
The Professor fits with Doug's style.
@jon32962 жыл бұрын
I’ve never seen wood split so easily. That was very satisfying to watch
@dvasymmetry96962 жыл бұрын
David here: economically for production if you do all 16-in lengths, you're doing about 1/3 less cuts versus a 12-inch length. On the other side if you cut long you're giving away one piece of firewood every 10 to 12 cuts. So if you're in production you don't want to go too short or too long. Would you charge more for 12 in lengths? There is a little bit more work involved. Nice video here
@alanj73062 жыл бұрын
I like Neighbor Doug. After watching him with that axe, I might call him Madman Doug. He was going to town. Awesome system he made with the tire... automatic kindling too. You’re blessed to have such a great friend and neighbor. It’s awesome that he stocked up your garage with the wood. Everyone loves seeing him.
@toddfraisure17472 жыл бұрын
Years ago I got an approx. +16" circumference lawn mower wheel and put a 24" handle on it so it would roll along the log. I strapped on an inverted marking spray paint can (for ground marking utilities) on the handle so the tip was about a half inch from the tires outside and 2" to the side and stuck a small sheet metal wedge so it shown as a pyramid sticking out the side of the tire that triggered the spray nozzle to squirt a dot on the log. The best thing about it was I could walk along the log forward so I could pay attention to my foot placement and not have to bend down over and over. I could have done some minor improvements but it worked well. I don't burn wood anymore but I'm sure it's somewhere in my basement garage. I may have spent $20 on parts.
@toddfraisure17472 жыл бұрын
@@jayamburn1959 Cleaning my shop to get ready for my next project.
@PurpleCollarLife2 жыл бұрын
Doug sure is an idea guy! Nice work.
@marcuswhite36282 жыл бұрын
I agree - he could be called “IG” short for your description.
@gregwitkamp55832 жыл бұрын
16” and 24” works great for measuring for a rick or a cord , three 16” ricks makes a cord. Two 24” ricks makes a cord. Cut your fire wood what ever size fits you stove , fire place, or fire pit.
@PRShoup2 жыл бұрын
Hello Adam and Doug! As a former military guy the enlisted men always referred to good leaders as "Cap't" or "Chief" regardless of actual rank. Doug is certainly a good neighbor and a good leader. With my military comments above what came to mind with me is "Cap't Do-it". Best of luck picking a nickname for Doug, and I wish everyone had a neighbor just like him!
@FORKinFISH2 жыл бұрын
There are a few versions of using a tyre to aid splitting, without constantly picking pieces off the ground, this is my fav version.
@ronwig76652 жыл бұрын
Most people I know of always cut their wood at 16 inches, mr magoo be a good one, he always smart
@kevinliveez41922 жыл бұрын
I made your log measure tool a while ago and I still use it. I found a magnet atHD and it had a” U “on it. I ground the pipe out some and glued the **** out of it. I jammed it on there and like I said. I still use it.
@mblind2 жыл бұрын
Neighbour Doug is the name. the man. the myth. We're watching the legend being written.
@hevychevy872 жыл бұрын
It makes me pucker cutting those old dead ash trees down too. The tops break out as they fall and when they hit the ground the bark and limbs go flying. Great video! It’s always a blessing having neighbors like Doug around. He is a wealth of knowledge and experience it seems like. Take care and stay warm! We’re almost through this winter lol 😂
@DanKlein_12 жыл бұрын
I like 16 for a couple reasons. Mainly 3 x 16in = 48in =4ft. so I know a stack 4 ft tall x 8 ft long is a face cord. 3 stacks is a cord. Then, what you already said about stacking easily into an IBC tote. What I do, for measuring is I have a 20 inch bar and I marked from the end 16 inches and drew a line with a black sharpie. so, I can turn my saw, and see where 16 falls. it is a lot of motion turning the saw to measure than turning perpendicular to cut. Maybe a combination of that along with the zip-tie is best. that way if zip-tie is on the wrong side, you still have the measurement on the bar to go by.
@solomontheuri321 Жыл бұрын
The tire log splitter idea is just on another level.
@markfin72252 жыл бұрын
The tire ring was worth the watch!
@scotttex10542 жыл бұрын
The zip tie idea is the best idea I have seen so far. Flexible and will not fall off. Easy to change lengths or use multiple length ties. I will not loose or damage these. I am pretty sure it will produce exact length cuts with practice. Thank you!
@DDL27282 жыл бұрын
We had Grands for the last 4 days & just getting to this. Sha (Cajun saying) Doug, he's always ready to help!! I call him Ever Ready Doug - just what I named him when we talk about your videos ❤ Love y'all - God bless y'all!! Editing: No way EVER would a log split like the tire logs in South Louisiana - NEVER!!! 😆😆😆
@AZHighlandHomestead2 жыл бұрын
Dynamite Decision Doug
@marcuswhite36282 жыл бұрын
I like it - or “D3” - D to the 3rd power…
@livedlearnedDIY2 жыл бұрын
Doug never has a lack of explanation of his project. He is quite in depth with his descriptions. Good work guys. Have fun.
@dougdodson74982 жыл бұрын
Been using an old tape measure for years. Just have a piece of angle on the end also. but I may have to add the point on it. I cut 16" and 20" lengths and use carpenter crayons. prefer the red color they show up best
@trevormegson75832 жыл бұрын
Who would not want Doug for a neighbour ? Great Guy. Dang good Doug.
@karlbenz82322 жыл бұрын
Neighbor Doug, The Man, The Legend!
@johngrossbohlin75822 жыл бұрын
I run a Stihl MS261 with an 18" bar for most of my cutting. If I keep the rounds an inch or so shy of the distance between the bumper spikes and tip I'm about 16." For those times when I need to calibrate my eyecrometer I simply lay the saw along the log a few times and I'm good to go. If I ran a 16" bar it would be even easier to calibrate the eyecrometer. If I run my MS461 with it's 25" bar I have a "spot" on the bar that I use for calibration. 😉
@ebinmaine2 жыл бұрын
"Eyecrometer". :-)
@mrtammy22 жыл бұрын
Best video I have watched in months, well done.
@thecrankyoldretiredlady52372 жыл бұрын
Dang, I wish had that tire-wood-corral gizmo back in my youthful years when we heated with wood! That was awesome.
@leovogelgesang43982 жыл бұрын
I used a 95 lb magnet with a 1/8” all thread and a fender washer at the other end. Works well for me.
@kingwood43572 жыл бұрын
Like the tire log splitter idea, works great.👍
@terrypomatto9072 жыл бұрын
Back in my younger day the firebox on my boiler was about three and half foot deep. I could put in three foot longs but I split the logs into pieces that I could handle. The children would split wood into sixteen inch pieces so that it would be easier for them to handle. I heated the house, garage, and also the hot water heater with hot water. The boiler was out in the back yard so I didn't have any mess in the house to clean up. This was back in the early 1980's. We only burned trees that were dead and the bark was mostly dropped off. Doug is the Good Neighbor!
@KenMrKLC2 жыл бұрын
I like when neighbor Doug is in your videos, I love the shop video where he shows his ideas etc. good vid!
@baldbear56092 жыл бұрын
Howdy Adam and Doug, I made my "Bucking Stick" from a computer hard drive magnet, a broken piece of fiberglass driveway marker and a fender washer. It is set for 18" however since the driveway marker has reflective tape wrapped on it at 16" I can use either or for bucking logs to length. Nickname for Doug.... "D.I.Y." Doug It Yourself! Have A Day! ;~)
@OneEyeCustoms2 жыл бұрын
I like that! Doug it yourself…. Thanks!
@seecesar2 жыл бұрын
Great video. I always felt like I was thinking too much about this topic but I guess I am not alone. LOL, thank you.
@rockymountainfirewood38732 жыл бұрын
Definitely easier than a measuring tape and marking. Nicely done.
@shanereynolds59712 жыл бұрын
Ash is such a friendly firewood. Dries nice, easy to split and burns well.
@freelonmorris36592 жыл бұрын
Here in Massachusetts all the Ash trees are dead.Was my favorite wood.
@cgsoutdoors_professor38832 жыл бұрын
Neighbor Doug; I tried using the bar with a magnet and quickly got off 16” so glad I wasn’t the only one. I really like the tape measure; makes it easier
@chrisnil2 жыл бұрын
Is now a good time to tell them that Stihl have a laser attachment for their chains saws that will mark the measurements and also the direction of tree falls
@chrisnil2 жыл бұрын
kzfaq.info/get/bejne/psucqsKTx922iYk.html
@gardeningpreacher2 жыл бұрын
I used a piece of PVC pipe and a cap bolted to my magnet and JB welded to the cap with a small piece of aluminum on the other end (instead of a washer)... works great! I also tried super glue and two-part epoxy... neither one held - the JB Weld did the trick!
@p.davidcarlson77892 жыл бұрын
Mingo firewood marker great tool! Just keep the paint warm before you go out in frigid weather
@TheHobbyShop12 жыл бұрын
Dougeiver is the nickname I thought of. Fits him perfectly.
@billdebuhr5392 жыл бұрын
Adam, you sell firewood and know a face cord is one third the width of a true cord. A true cord is 4 feet (48") wide by 4 feet high and 8 feet long. So one third (1/3) of 4 feet (48") is 16 inches. Any seller of firewood would be cutting at 16" long.
@jeffpeters10142 жыл бұрын
I’ve been using the zip tie method since I saw Chris from In the Woodyard and it works great. On the off side you just eyeball on the log where the cut will be, after a while you get pretty adept at measuring.
@jeffpeters10142 жыл бұрын
Edit: using the magnetic measure in brush the magnetic measure gets caught in the brush. Looks pretty useful in clear area
@mikeheilman25602 жыл бұрын
"The Professor" would work and compliment Doug.
@robbiebaker24122 жыл бұрын
I like that splitting ring he made with the tire. I would have never thought of that
@brandonhoad90332 жыл бұрын
For the magnetic pvc measuring device you made, I pvc glued a end cap ( after drilling and attaching a threaded magnet) onto the pipe. Works great and now worry of falling apart like yours did
@brandonhoad90332 жыл бұрын
No worry , not now worry
@kennethanderson31292 жыл бұрын
I use a red carpenter's crayon to mark my lengths. I also made up a gauge block at the desired length from a piece of 3/4" plywood with an integral handle. I move it from one crayon mark to the next. Works well.
@DocRaunchy2 жыл бұрын
If you didn´t use CGI, both of you guys have a fantastic aim splitting wood. Impressive. Regarding a nickname for Neigbour Doug: In Germany McGuyver was a reference for the younger boys and guys. Me being a bit older Walt Disneys Gyro Gearloose ( Daniel Düsentrieb in German ) comes to mind. But to be honest, I like Neighbour Doug. He is a great example of what a great neighbour should be. He holds his own ground, so finally I would go with Neighbour Doug. Watching all your videos and feeling the sense of community, what big fun ( and lots of work and preparation ) would be a big Hometown Acres fan meeting on your fabolous grounds in the summer.😉
@jusbra15192 жыл бұрын
Cut it all to 16", it looks good stacked.
@aldiminico65132 жыл бұрын
Morning Adam. I have a designated area in my back yard for splitting. I’ve been doing the tire holder for 40 plus years. I have a 36” piece of red oak, 12” high, on concrete, with the tire attached in four places. It’s the best and easiest way to hand split. Thanks for the video.
@GregPrince-io1cb8 ай бұрын
That excavator and Joe's expertise.... Brad .... Priceless!! So cool to see quality operators on equipment... Powersaws included. Massive amount of work done in 3+ hrs!! Well Done!
@joeshmo41102 жыл бұрын
Acc-u-mark for firewood measuring. Expensive but I bought the adjustable 1 and its great!
@eddiepulleyblank4382 жыл бұрын
When my eye ball measurements go bad, it’s time for kids to start doing the job!
@whiteysolly67602 жыл бұрын
I simply mark the bar at 16, 18, and 20", place the tip of saw at the end the log, note where the desired mark is and put a small cut there and so on down the line
@kevinmason30862 жыл бұрын
I tried the magnet and PVC it did come unglued then got thinking I put a rod through the magnet and the PVC then put a washer on the other end and nut on each end works great. Done that about 3 weeks ago still working great. I do like Doug's way with the aluminum arrow makes it even lighter.
@randiegadberry54482 жыл бұрын
I use a 28” bar with a cpvc spacer , magnet, and end disc. I put the spacer rod close to the tip of the bar. Better accuracy.
@waderootsbarber2 жыл бұрын
Big fan from upstate New York. DIY Doug
@jasonj14422 жыл бұрын
You could replace that washer on the end with something thicker than the width of the saw mark so it doesn't get stuck in the groove and pull off. Maybe round the edges on it as well so the corner doesn't catch. Piece of plastic or aluminum round stock would probably work perfect. Also, I like "Neighbor Doug". It just seems to fit.
@stanleykeith69692 жыл бұрын
Adam, do you ever worry about gasoline leaking from any of your vehicle's with you burning fire wood. Adam, how about a NickName for Doug as "Mr.Gadgets " ! Doug always comes up with some Great Ideas. I have the PVC pipe at 16" and I also made a pc of all thread at 16" both work Great.
@michaelthola17092 жыл бұрын
Doug is quite the inventor for sure. I think the magnet with some kind of measuring device on the side of the bar is my favorite, gives good measurements and is easy to attach or remove. When i cut firewood i just eyeball it but i also don't have a wood stove in my house for heat mine is strictly for campfires. Awesome video. I like "Doug the creator".
@larryhronesz56932 жыл бұрын
I use the firewood marking tool the 16 inch one they also have a adjustable one too , but at 16 inches 3 rows is a full cord I have tried a few different ones and like this one best can change from one side to the other. I think you're responses got hacked they are in All different languages and make no sense, just letting you know enjoy your channel and All the different types of content keep up the great work
@kybrancaccio2 жыл бұрын
Daring and Dependable Doug!
@zachsonne87342 жыл бұрын
Doug is a good man.
@allanulen38092 жыл бұрын
really like the tire idea. I've got a stump that i split on but this tire will keep me from having to pick up pieces after they go flying off the stump. I'm 67 going on 68 and I'm getting too old to keep chasing wood.HAHAHAHAHAHA.
@PapaRug.582 жыл бұрын
great ideas Doug I like the tape measure with the chain idea cause it never fails to drop or have tape come off while walking thru the bush then have to back track to find it
@randallquiring95252 жыл бұрын
My dad had a large wood stove that could handle 22 in. logs. we used the length of the chain bar to roughly measure the lengths, although this requires rotating the saw, you don't loose anything. After awhile you just eyeball it.
@BType13X2 Жыл бұрын
That's why I have a 16" bar on a smaller saw, its my marker / my limber, use the bigger saw for doing the business.
@camdee9916 Жыл бұрын
Quote of the video, 'neighbour Doug is like Macgyver'. Brilliant.
@firefamily20002 жыл бұрын
Enjoyed the video. Never seen anybody split wood inside a garage. Never seen anybody make 'improvements' to an old tire. (been split'n wood in a tire by hand for decades) I have used a power splitter only a couple of times and have found splitting by hand is at least 75% faster. Regarding cutting logs to length; I have never even considered anything but eye-balling wood for my stove. my stove takes 18" logs but I can stuff a 24" one if I try. I stack wood in a circle, and a crappy pile really does not bother me. I also do not generally cover my wood or even worry about seasoning it. I use a hockey puck size chunk of a dura-flame and it will start pretty much anything, and I place the next load in front of the stove to dry, it works every time. i burn 2-5 chord every winter., depending on the price of oil and my ambition.
@jamesgulrich74162 жыл бұрын
Yeah, the "D" man. Quite handy to have as a neighbor. I think Neighbor Doug is still a great name. My girlfriend's stove is an Avalon and 14 inches is perfect. Luckily, the Mingo Marker has a 14-inch wheel (separate purchase) and I use the heck out of it. Those other ideas seem pretty handy and simple, but I love the Mingo Marker! Great video!
@marlinbauer68082 жыл бұрын
The tape with a piece of sidewalk chalk works best for me.😀
@rockandrattleretreat58302 жыл бұрын
I also use a broken arrow, but I have to cut them to 13" since my firebox is much smaller than your and JB weld is the way to go. Also for holding your magnetic marker I hang a piece of metal from para cord (large washer or scrap piece) off my chainsaw chaps and stick it there when not needed.
@mattshell77532 жыл бұрын
Great video again on a cold day in the Ozarks. I just have a tape measure and piece of chalk works fine for me. Still thinking about name for Doug lol
@wooder1002 жыл бұрын
I use a red laser sight for a pistol, mounted it to the wrap handle in the same place the zip tie is and it points a line right down my bar at whatever length set it to - like to think I invented the idea but I’m sure someone somewhere has also done it 😉
@trent37232 жыл бұрын
I made my measure stick just like you did but instead of glueing it I put a cap on and bolted the magnet to it. I was gonna say name Doug the Douganator but then you said what kinda wood he was splitting lol.
@JeepLJ2 жыл бұрын
Man Doug is a splitting machine!
@ProductiveRecreation2 жыл бұрын
I used to go by eye and not care a whole lot with anything 15”-19” long. Now I have a different stove that just barely takes an 18” piece front to back, so I’m cutting everything 16” so it fits easily and less ash gets on the bottom door lip and glass. I have an old 4’ piece of conduit that I marked at 16” increments and I go down the tree marking with a piece of my kids’ sidewalk chalk. Ash is a dream to split. Unfortunately it’s all dying around my property due to the borer, so I’m going to be cutting and burning a bunch of it in the next few years.
@Lakecenterlawncare2 жыл бұрын
I made what you did except I put a cap on the end. Then I bolted the magnet to the cap. Dougyver is the man!
@stevethiel58382 жыл бұрын
I use kids sidewalk chalk instead of spray paint. Easier to put in pocket, doesn’t freeze, cheap.
@jaypirosko2 жыл бұрын
I usually run 2 saws depending on how big the logs are of course, I almost always have a 16" bar on my medium size saw so I simply use the tip of the bar to the dogs or the "effective bar length" then pivot the saw and that is usually accurate within a half inch or so. fast and easy
@stevensfirewood86582 жыл бұрын
I started using the zip tie on all my saws about a year ago instead of the the magnet rod on the bar. Once I got used to the zip tie and the reference points to my eye I can make nice and consistent firewood.