torq locker will be including shims with the production units the one I have is a prototype. however even with the factory shims i expect it will work fine.
Пікірлер: 97
@AppalachianMountainRiders4 жыл бұрын
Installed the Torq locker in my Pioneer 500 and it transformed into a tank! Especially since I have a long travel kit with 32” Blackwater’s. One of the best upgrades I’ve done to the P5 by far!
@rishabhisrani3006 Жыл бұрын
Hey we are automotive enthusiasts from MIT University India, we are working on building a 4*4 ATV for BAHA SAE and have ordered this locker but it didn't come with a cross-pin, could you please let me know the exact diameter of your cross-pin.
@zackkasey4 жыл бұрын
Installed the Torq Locker on my P5 and it was a night and day difference. Highly recommended.
@glockmanracing4 жыл бұрын
Wish this was around when I got my first Foreman 450 in 1998. Only thing available was the highlifter spool for the front diff. Spool and no 4WD disconnect made it hell to drive on hard ground. Great video as always, thanks!
@MrSherlockOhmz4 жыл бұрын
I installed a Detroit gearless locker installed on my 300, it looks the same but it never made the clicking noise that one does. They make a big difference, nice to have a honda thats a true 4wd.
@fishingislife12814 жыл бұрын
I have the same wheeler and have been wanting to do this for so long! I ride sandy creeks and a locker is a must!
@lc36014 жыл бұрын
Great Video brother!!!!
@keatin10634 жыл бұрын
Nice vid man, keep it up
@LisaSmith-dc7ig4 жыл бұрын
Love the vids
@corajokinen2534 жыл бұрын
Great video @MudPuppy! It's clear you have lots of experience with this style of locker. This is one of our prototype lockers, thanks for bringing the tolerance issue to our attention. For production TORQ Lockers we will include shims just like we had to for the Can-Am differentials.
@MudPuppyOffroad4 жыл бұрын
Awesome!
@MudPuppyOffroad4 жыл бұрын
The instructions could also use some more details like torque specs. I didn't have any issues but I have installed a lot of your products. thank you for finally making this locker I've been praying for it for a long time
@tribblejowers26933 жыл бұрын
And it was a beast
@nnnox34baldwin114 жыл бұрын
In you other videos bud light should sponsor you😂😂😂
@jasonwilliams28523 жыл бұрын
I just finally got me a 300 4x4, was hoping i would be able to find a 424 selector but i can't now
@TorqMastersIndustries4 жыл бұрын
HI Mud Puppy! The TORQ Locker for early Honda ATV's is now available on our website!
@MudPuppyOffroad4 жыл бұрын
Awesome I'll share a link on my Facebook page
@athlon4503 жыл бұрын
What about the a 2007 honda foreman?
@rishabhisrani3006 Жыл бұрын
Hey we are automotive enthusiasts from MIT University India, we are working on building a 4*4 ATV for BAHA SAE and have ordered this locker but it didn't come with a cross-pin, could you please let me know the exact diameter of your cross-pin. Have tried to get in contact via mail but didn't recieve any response yet
@deancongleton64554 жыл бұрын
Wanna do a Christmas discount on a 35% gr for a rubi🤣
@c.kpowersports.tv.27194 жыл бұрын
Do you know if you can get one for a 2003 yamaha grizzly 660? Really interested in one and really wanna improve my front diff and dont know how
@Richard-gy1fo4 жыл бұрын
300 Below will treat the pin. I did my 350d ring and pinion.
@jbt1152 жыл бұрын
can i put this in a 2009 honda rancher sra
@masonsebrnn32974 жыл бұрын
how did u manage to get your diff out so easy?? mine is a pain
@djmorgan87833 жыл бұрын
What oil do you guys recommend with this Locker
@nabielsuleiman70392 жыл бұрын
I have a 2002 TRX 450 S Honda foretraxxs carbs clean fuel is clean has spark also timing is set right has compression won’t start
@BryceColeman18262 жыл бұрын
Is the carb pushing fuel?
@revenantrex19573 жыл бұрын
But can you put one in a 350d?
@bro123noboty84 жыл бұрын
Ok so I'm trying to convert my Honda 450 Forman to a switch able 4x4 do u need a locker to fo that?
@alonzoruiz46734 жыл бұрын
Bro123 Noboty no
@twinsnails49833 жыл бұрын
Does a torque locker put any stress on any part of the Honda? And do I need a 2 Wheel drive button?
@MudPuppyOffroad3 жыл бұрын
Yes and yes
@twinsnails49833 жыл бұрын
@@MudPuppyOffroad Thanks
@burtsimmons96914 жыл бұрын
What welding helmet do you use?
@MudPuppyOffroad4 жыл бұрын
Harbor freight
@melvinbaillie88592 жыл бұрын
are you using warren 424 switch out mel
@tribblejowers26933 жыл бұрын
I put the torq in my can am
@RW300ex3 жыл бұрын
Would this work in a 2000 rancher? Used to working on 300ex and 400ex. utility bikes are new to me as far as mods
@MudPuppyOffroad3 жыл бұрын
I think it would work on that one actually I would have to look at the part numbers and see what style diff it uses. They are coming out with one of these for the newer Honda's as well regardless
@RW300ex3 жыл бұрын
@@MudPuppyOffroad thanks for the fast response! I just started building the old rancher. One ride with my friends(im the only one stock) needless to say i didnt have much fun bottoming out and almost drowning it a few times. Lol
@curt17854 жыл бұрын
Do you know bout when this is going to be able for sale to the general public
@MudPuppyOffroad4 жыл бұрын
Probably mid-January I'm posting an update video on it soon. I have contact information for the vendor
@codypruett97273 жыл бұрын
Please do an update or drop a link to this 4-2-4 kit I can’t find info on the anywhere
@MudPuppyOffroad3 жыл бұрын
Welcome to the club. There are none available lol
@codypruett97273 жыл бұрын
@@MudPuppyOffroad damn did wide open go out of business as well ?
@MudPuppyOffroad3 жыл бұрын
Not sure
@markwitteman37758 ай бұрын
Hey man I been looking for the name of the drive shaft u have to change from 4 wheel drive to 2 wheel drive
@MudPuppyOffroad8 ай бұрын
They are no longer in production that's why you can't find them but they are called a 424
@burtsimmons96914 жыл бұрын
Who’s can-am huh? Mister “try that on a can-am”
@MudPuppyOffroad4 жыл бұрын
There's a reason I already sold it lol
@bryanlovelace17374 жыл бұрын
I have a Honda 300 and while I’m riding in water and it gets up to the racks it wants to kinda cut off and bog down does anyone have an idea on how to solve this issue
@MudPuppyOffroad4 жыл бұрын
Grease your spark plug boot and wrap the boot and wire in electrical tape
@MudPuppyOffroad4 жыл бұрын
If that doesn't do it it's probably one of your carburetor vents or seals leaking
@bryanlovelace17374 жыл бұрын
Ok thank you
@tylerjames91014 жыл бұрын
What happen to the tan 300?
@MudPuppyOffroad4 жыл бұрын
Sold, it's back up for sale again lol
@NelsonCreekCustoms4 жыл бұрын
Would you recommend torq locker for a non selectable 4x4 300
@MudPuppyOffroad4 жыл бұрын
Yes, but you'll probably want the 424 eventually
@NelsonCreekCustoms4 жыл бұрын
Mud Puppy as long as it still turns about the same I'm cool with it
@leanbackben78294 жыл бұрын
Does the 424 work on both gens of the 300?
@NelsonCreekCustoms4 жыл бұрын
leanback ben yea
@landtowater_27472 жыл бұрын
@@MudPuppyOffroad do you know anywhere a person could get a 424 for a 300 because now because they seem to be impossible to find
@dirtbikerider12784 жыл бұрын
does the 424 switch out work on the first gens????
@MudPuppyOffroad4 жыл бұрын
No
@dirtbikerider12784 жыл бұрын
@@MudPuppyOffroad good to know thanks for the fast reply
@adam946634 жыл бұрын
For the pin
@MultiShannonb4 жыл бұрын
Where did you get this, I cant find it
@MudPuppyOffroad4 жыл бұрын
This is a prototype that just came out once I get some testing on it we will put out more information
@MultiShannonb4 жыл бұрын
Cool, thanks
@Jeff-jr3sg4 жыл бұрын
@@MudPuppyOffroad how many honda vehicles will this design work with? Besides the gearing can it finally let the Rincon play in the mud?
@Jeff-jr3sg4 жыл бұрын
@@MudPuppyOffroad also these long videos are amazing
@BigFungus194 жыл бұрын
10 oookadonkas? Did I hear that right
@adam946634 жыл бұрын
Hardened keystock turned down
@britthardie46804 жыл бұрын
Can you snorkel a electric shift atv
@justinpardue99034 жыл бұрын
Britt Hardie yes the shifter don’t have any thing to do with the air box
@MudPuppyOffroad4 жыл бұрын
Yeah but ES is prone to water related issues
@elibaird39114 жыл бұрын
What does a torque locker so
@elibaird39114 жыл бұрын
Do
@MudPuppyOffroad4 жыл бұрын
Fixes 3wd
@davisprice82724 жыл бұрын
Where do you buy the spa hose
@MudPuppyOffroad4 жыл бұрын
Most Lowe's or home Depot carry it
@davisprice82724 жыл бұрын
What about vent lines
@MudPuppyOffroad4 жыл бұрын
Some. Sprinkler line works good
@MudPuppyOffroad4 жыл бұрын
Same
@davisprice82724 жыл бұрын
Do you use 3/16 inch or 1/4 and will the locker fit 350 ranchers
@landonsmith55774 жыл бұрын
Am I the only one that wonders where this dude can afford all these bikes
@MudPuppyOffroad4 жыл бұрын
Lol quads are cheap. All my money is in tires and upgrades
@CmurkGam3ing4 жыл бұрын
How much was the locker
@SenileGiraffe4 жыл бұрын
429 is what I've seen
@lloydbruemmer24864 жыл бұрын
Having the camera on you head isn’t cutting it. Can’t see what you’re doing or talking about. Helps if the camera is pointing at what you’re doing.
@MudPuppyOffroad4 жыл бұрын
Look at you bigshot complaining about free information. What a prick
@TheHomePros62213 жыл бұрын
I can’t believe your ruining such a nice pristine Honda 300
@BryceColeman18262 жыл бұрын
How is he ruining it
@TheHomePros62212 жыл бұрын
Really clean pristine 300s are very hard to find and he’s basically turning it into a mud swamp bike which is ruining it IMO, I kno it’s his bike he can do what he wants but why not get a more ragged out bike to turn into a mud bike instead of such a nice clean one like this?
@BryceColeman18262 жыл бұрын
@@TheHomePros6221 why would you want an ugly mud bike and not a clean and goid looking one.
@wantapgt4 жыл бұрын
Did you know it’s actually “for all intents and purposes” and not “for all intensive purposes”