Honda CB750 Carb Cleaning: 4 Things People Miss
Рет қаралды 72,657
Күн бұрын►► Here is my step by step CB750 Nighthawk Carb Cleaning tutorial - www.themotorcyclemd.com/inlin...
Honda CB750 Nighthawk carb clean
Cleaning an Inline four CB750 Nighthawk carburetor assembly can be overwhelming. Some pass off carb cleaning like it's a walk in the park and it only takes tools and "common sense". The truth is, if you have never ventured this deep into a carburetor system it can be a nightmare. I want to rid you of that stigma and understand exactly what it takes to do it right even if it is your first or 100th time.
In this video I want to discuss with you the top 4 mistakes people miss when diving into the the Honda CB750 carburetors. Basic or not these tips will guide you straight into the pass for success. Hope it helps!
To gain access to the entire Honda CB750 Nighthawk Carburetor Cleaning workshop.
Click Here - www.themotorcyclemd.com/inlin...
Want more? You can find this video and so much more in the MotorcycleMD Inner circle membership. I will be right there with you in the mix!
www.themotorcyclemd.com/mcmd-...
Vacuum Diaphragm rebuild kit: www.revzilla.com/oem/honda/ho...
Honda CB750 Nighthawk Carburetor Cleaning : 4 Things People Miss
@TheMotorcycleMD 2 жыл бұрын
►► Here is my step by step CB750 Nighthawk Carb Cleaning tutorial - www.themotorcyclemd.com/inline-four-product-options
@gordonneil9970 2 жыл бұрын
Honestly mate, I've had my 750 for 18 months and I have watched more of your videos than I can count. I'm so grateful for the effort that you put into them. Keep that content coming 👍
@daveco1270 4 жыл бұрын
I bought an extra set of CB750 carbs on Facebook Marketplace for 100 bucks. I got them just so I could take them completely apart, clean everything and reassemble them for educational purposes. If I screw up, they're an extra set so it's not the end of the world. I'm in the process of ultrasonic cleaning everything at the moment. So far so good. When I'm done I should have a nice clean extra set of carbs I can use on my bike or resell to someone.
@TheMotorcycleMD 4 жыл бұрын
Great plan!!!
@adjbob56 Жыл бұрын
The full paid-for course is well worth the money. I watched a dozen videos, have 3 manuals - but it was your $40 video series I kept going back to this weekend as I rebuilt my 1993 Nighthawk carbs. Honestly I don't know if I would have discovered my damaged vacuum diaphragms without your full video. The Factory manual confirms they need to be replaced even if only a pinhole, as the slide won't stay in correct position. I didn't even notice the small splits and holes in the rubber until I stretched them like you show on the course. These same carbs were used in the 84-85 Nighthawk 700 with shaft drive.
@stefankrijgsman 4 жыл бұрын
ty , just bought a 91 honda nighthawk 750 usa model in europe , that was running badly ,thanks to your previous video i was able to remove them , and now the cleaning begins , keep up the amazing work and how to's for this amazing bike
@igortchouiko2977 2 жыл бұрын
you're doing the lords work good sir, all the shops in my city dont do classic bikes anymore, so time to learn it all myself
@charging7 4 жыл бұрын
never thought of using steel wool on the brass pieces, love it, thanks!
@philspaces7213 4 жыл бұрын
The moral of the story is that1: we should re name “carb cleaning” to “fuel delivery system cleaning” And 2: dont be lazy. Cody, man you got some top shelf info in all your vids. Thanks alot, and keep up the good work!
@TheMotorcycleMD 4 жыл бұрын
DING DING DING! My pleasure Phil, glad you enjoy brother.
@rickiejacobs5910 2 жыл бұрын
I always add Sta bil to the last couple of tanks of the season to run it though, shut the fuel valve off and run them dry before winter storage. Also make sure the tank is clear full with the treated fuel. Never had a problem with carbs on my old bikes. Also always add Sta bil to my lawn equipment gas cans all the time.
@brwhyon 3 жыл бұрын
Great info Cody, I just reassembled my 1980 CB750 carbs after a thorough and proper cleaning, yes, O-rings were replaced, why go to all the trouble of cleaning only to have the bike "pisssin gas" as you say. Thanks for the info.
@urena03 4 жыл бұрын
love all the nighthawk vids!
@justonovak8216 4 жыл бұрын
Cody, I always love to watch your video's even when I have Kawasaki concourse 1000cc, a Versys 650 (also Kawasaki) and a Hayabusa 1300 Suzuki. The concept is what it really Mather and I always applied your expertise to it and it works great. Thanks a lot for your time and effort. Side comment I start watching your add commercials so at least you have the benefit of it. Your video's are top of the line. Thanks again. Justo
@TheMotorcycleMD 4 жыл бұрын
Thanks Justo!!!
@rogergodin6443 3 жыл бұрын
Absolutely great advice thanks
@jhollendyke3080 3 жыл бұрын
I am so glad I took the time to watch your video. I have been pondering buying a 1992 750 CB I love the style and riding position but I’m getting to the point in my life where wrenching on old bikes has become tedious. I don’t think there is any techs in my area I can trust to do it correctly so I’ll stay bike-less for now. I got spoiled, the last two bikes I had were FI and shaft drive. I’ll never go back. I just have to find a bike with hydraulic lifters? Thanks for getting me back from the precipice lol
@jeffl.oliverson6690 3 жыл бұрын
Question, what brand rebuild kits do you use or recommend for this model carburetor? How about floats? Thanks. I like how you go over everything in detail. Great to follow.
@kristaandsimo916 3 жыл бұрын
Hello dear Mr. Thank for your amazing videos you made. Question do you have any video how clean yx600 carburetor and how to adjust Fuel adle?
@How2Wrench 4 жыл бұрын
Nice work Cody....:)
@TheMotorcycleMD 4 жыл бұрын
👍🏻👍🏻👌🏻
@AlexS-yy9qu 4 жыл бұрын
Awsone video sir! Thank you!!
@Oldtimerider 4 жыл бұрын
Awesome vid... thanks bud.
@Berkner80 3 жыл бұрын
I had mine cleaned a while back but still had to run a while with the choke was on a bit so thinking I may need to have them cleaned again. May do it myself this time but looks like a pain. My o-rings were changed so don't think I need to worry about that.
@juref4003 4 жыл бұрын
Awesome video! Love your channel. Will this work for my honda cb650 1981? I guess so but i want to check with you :). Thanks!
@bermbuster6 Жыл бұрын
Good video thanks for the advice!
@jancilek 10 ай бұрын
this is great, thank you!
@ecttreker9816 10 ай бұрын
Awesome video
@FlyingSugarCat 3 жыл бұрын
Excellent video. Do you have a description/link where you can get the fuel shutoff vacuum tube from? If yours is requiring replacement?
@thedude102878 4 жыл бұрын
Can you post a video on tuning the air fuel screws on these carburetors after a rebuild? Thanks for the content!
@Longpath1050 2 жыл бұрын
I just bought your vid set and rebuilt my '81 CB 750 F carbs. Explanations were great. I do wish Cody had included the sync but I got it anyway.
@adjbob56 Жыл бұрын
He has a separate video on the sync and it is free on his channel, does not need to be included in what you bought.
@taladrotalisman9118 3 жыл бұрын
Hi, nice video, I have a '94 CB 750 (Seven fifty) european model, wich has the same engine & carbs, it has been sitting for about 6 years, my question is, what can I use to clean the bottom buckets that are full of rotten and dry gasoline residue, the carburetor cleaner can't take out the spots, I wish I could send you a pic to show you how bad they looks.
@rogergodin6443 2 жыл бұрын
Love it Cody ,got a 72cb75to do
@sirwanksalot247 4 жыл бұрын
I just got a 84 honda magna vf1100 and getting it road legal tomorrow, but trying to solve a issue it is having, when i shift from neutral to first gear it lurches a bit forward, I have cleaned the slave cylinder didnt really need it but was replacing the bleed screw that someone stripped, re bled the system, and still having same problem, the previous owner said it died unless you gave it a little gas going into first, someone mentioned that the brass bushing and the aluminum rod going into master cylinder might need changed, and was reading online and it said could be friction from the oil if it is thick, with the bike turned off and in first gear and squeezing clutch i can push it a little just very hard, if you have any ideas i would greatly appreciate it, also just watched your video about rear brake light adjustment, i think that will solve the other issue i am having will find out in the morning. thanks
@nickersonjake50 4 жыл бұрын
hello where do you get parts for the 750 nighthawk?
@pedrosousa7493 Жыл бұрын
Hi Cody, I just finished the rebuild of the carbs. All nice and clean. Already in place and synced. Now the difficult will be the pilot screw adjustment as I installed new ones (Keyster rebuild kit). So the question is: besides using the supet expensive honda tool or the super fancy motion pro 90⁰ tool, none of my tools reach the 2 and 3. What is you recommendation? Can you share your wisdom? Keep up the good work 💪
@sexyworm1000 3 жыл бұрын
is there a way to eliminate that vacuum valve or is it necessary I'm mainly curious cause I'm building a chopper I got traded and its got no gas tank so I'm kinda making the fuel system from scratch lol and yes I know ill need to tape off my pods to get proper vacuum on the slides
@sunsetoriginals7320 4 жыл бұрын
Hey. Just wondering if you could make a video explaining how to change spark plugs on a CB500 series (Particularly the CB500F 2013 model) 2013 to present. I can't seem to find a decent video explaining how to do it. I currently have nearly 40,000 km and figure it's about time to do them.
@vlratcliffe1 Жыл бұрын
Hi just found your vid iv got cb750fn2 and it's been parked up for close to 3 years . (Due to my disability) the Forkseal has leaked .front brake calipers seam stiff and now due to the vid I'm guessing the carbs an fuel is in need . Juat wish I had the mobility an skill to tackle these . What would you recommend trying 1st .as I can only fiddle with it for a hr or so then I'm laid up for a week lol cheers
@zwebslinger3526 4 жыл бұрын
One thing I do in addition is hit the exterior parts of the carbs with a brass wire brush on a drill. Also I get the brass interior parts separately with it as well (while removed of course). It also makes the tops shine like new and surprisingly without bad scratch marks. All screws, springs and choke parts get the same treatment. Just don't use it on interior or fragile bits.
@TheMotorcycleMD 4 жыл бұрын
Me too!!
@jamesfarrington7434 Жыл бұрын
Where do you get your honda carb rebuilt kits.
@daveco1270 3 жыл бұрын
Is contact break cleaner better to spray into those passageways than carb cleaner? I've cleaned my 1975 CB750 carbs a couple times and I only just recently figured out that the air screw seat has a hole at the bottom that leads down into the tunnel the pilot jet uses. For the life of me I couldn't figure out how that screw was effecting the idle (among other things.). You can't really see the hole when you look into where the screw sits (even using a flashlight and a magnifying glass) but I stuck a thin guitar string into that hole and realized it didn't stop where I thought it should, it continued down into the pilot jet passageway. Kind of embarrassed I didn't realize that sooner. The rest of the carb is pretty obvious (vents, main jet and needle valve seat).
@ratbrain7743 3 жыл бұрын
OUTSTANDING job there. Got a 2002zrx1200 that was rejetted and pods added 15 years ago at 2 stealerships. It fouled plugs DEAD at 500 miles. The first shop told me I wasn't riding it hard enough. Young punk ass mechanics. Took it eventually to another stealership. Neither one could get it right. It has never ran right. On my back porch now and still looking new. Aint rode it in 8 years. Gave up and got a fi xtz1200
@crujonesisradd Жыл бұрын
Any clue what size the O-Rings are on the fuel transfer tubes between the carbs? I'm finding they're only in the full rebuild kit for each carb, but no sizes and part numbers.
@sfess002 4 жыл бұрын
Love it man thanks! Just starting disassembly on the carbs on my '85 Nighthawk last night. Any recommendations on which replacement gaskets/o-rings to buy and from where?
@TherealWinterpillow 3 жыл бұрын
I'm sure you found them by now, but if you haven't you can find them at your local hardware store.
@sfess002 3 жыл бұрын
@@TherealWinterpillow Thanks yes I believe I found them on eBay
@dsomas91 10 ай бұрын
Thanks Cody! I think I did everything as you recommended. The only difference was I used a new K&L carb kit and replaced the idle and main jets, the needle and seat, and air mix screw and spring. Put it back on my ‘72 CB750K. Started rightaway on test tank. But it revved to the moon when started in full choke.
@gulfy09 4 ай бұрын
Mines done same thing today. Did you figure it out
@dsomas91 4 ай бұрын
I had completely forgotten about this issue. But if my memory serves me right, I figured it out within a few minutes. I’m embarrassed to admit, it was a non-issue… turns out there was no gas in the tank… I just never looked at the gas level in the tank after I took the test tank off and hooked up the gas tank. 😅
@rickyg.1854 Жыл бұрын
Where is the best place to order Honda carburetor O ring sets from? I own a 2000 model Honda Magna 750C.
@johnnybigpotato2404 Жыл бұрын
Always wondered what those dam little brass balls were for!!! :) Tanks Buckwheat!
@peoplearestuck 4 жыл бұрын
Is this carb similar to the 1972 Honda cb750 k2?
@vernonlevy1447 2 жыл бұрын
Good demonstration. Could I have my carburetor ship off to you to have it done professionally? Thanks
@mikehanson4430 3 жыл бұрын
What about cleaning the little jet nozzle for the accelerator pump? That seems to be a major problem for me because you can't remove them!
@HagersvilleHunk 2 жыл бұрын
l have a 81 CB 650 and its starts on 3 cyls. soon as l apply throttle,it stalls.Had a ton of dirt in tank,flushed out and removed carbs,kept them together but cleaned bowl,jets and passages.NO2 cylinder has spark,but no fuel.Any ideas? thanks
@Mrbooboo1972 4 жыл бұрын
Always nice picking up information.
@andyMSH700 Жыл бұрын
Great video...those earings are weird but what the hell...times are changing i guess. They could indeed come in handy for storing pencils.
@bretearwood7027 4 жыл бұрын
I learned all this the hard way.. and by hard way I mean taking the carbs off and breaking them down about 14 times..! Damn those orings!.. dont skimp on them they make all the difference between wasting time and utilizing time!
@BasicPoke 4 ай бұрын
Where can I get one of those shirts? Thanks for the videos. You seem to know what you're talking about. Do more CB750 SOHC please.
@mframadhan3108 2 жыл бұрын
hi,, I'm from Indonesia and I have a question for the CBX 750, what is the oil capacity?
@garyplaskett4874 3 жыл бұрын
I can't find any parts for my 95 nighthawk any ideas?
@thelazyhandyman8581 Жыл бұрын
Where do you get all the parts...like gaskets...o rings?
@Mytwistedvoices 4 жыл бұрын
Nice video, I had to encourage people to replies fuel rings. I used a $8 carb brush set from Amazon. The OEM kit replaces all the brass (except choke). The All Balls Racing was disappointing. I wish you put the pilot screws in there. People miss the little and double stack them. But you’ll have that in the full build! People are taking interest in the ‘90s NH. Great time for this video!
@TheMotorcycleMD 4 жыл бұрын
They are a fantastic bike. The whole motor/charging/ignition system is bulletproof!
@Mytwistedvoices 4 жыл бұрын
@@TheMotorcycleMD Great videos! I'm a long time fan and you have passed on great advice!
@edbowden6000 3 жыл бұрын
Im on round 4 taking my carbs off my cb900. Never split them and ended up leaking. So now im doing that, and ill change diaphragms while im there🤷♂️ oh well still only like $300 into a running "driving" bike
@Mrbooboo1972 4 жыл бұрын
Great Video Bud. Ty.
@TheMotorcycleMD 4 жыл бұрын
My pleasure!
@Mrbooboo1972 4 жыл бұрын
Thanks so much. I'd take your word for it over anyone else. I appreciate you taking the time to answer. Keep at these Great videos, I know they have helped me out alot. Thanks Man. 😎👊👍
@FalconTaco 4 жыл бұрын
This pleases me.
@TheMotorcycleMD 4 жыл бұрын
Exactly what I was aiming for!!
@paulquiroz4070 3 жыл бұрын
Cody, I have a 1978 CB750F. The carbs were running fine, but after 2020, they got dirty once again... Q: can I send you my carbs for you to clean them? If so, please confirm... Thank you
@tonyrichengod9280 3 жыл бұрын
Hello all. I'm wondering if anyone knows this : Does the 4-1 exhaust system off a CB400 Super Four fit on a 4-2 CB750 Nighthawk/F2? I'm trying to swap the system on my 750 for a 4-1 to reduce weight and noise. Would it work? Or are there better options for this? Thank you.
@NickShl 3 жыл бұрын
Could you add link to full teardown video?
@joeblack6905 3 жыл бұрын
Cool man
@TheMotorcycleMD 3 жыл бұрын
You’re cool Joe!
@BingonShaw-bm6tj 7 ай бұрын
Where is your shop
@willcountypowersports6338 2 жыл бұрын
How much do you charge to rebuild them?
@VictorVegaMotoVlog 4 жыл бұрын
Hello Cody, I have a friend with a 250cc carb issue, between 4k and 6k rpm strugle and hesitate, above that back to normal, what you think I coud check?
@TheMotorcycleMD 4 жыл бұрын
I would check plugs, the carb’s diaphragm piston to see if there are any tears or holes in rubber section..
@VictorVegaMotoVlog 4 жыл бұрын
@@TheMotorcycleMD thank You! I'll do that!
@Jaysqualityparts 4 жыл бұрын
Should you be able to suck or blow through a drain on a cb550k with drain screw tight
@TheMotorcycleMD 4 жыл бұрын
If that same “drain” has a brass tube connected straight into it inside the bowl then yes. That allows overflow is the flow stuck or adjustment is to high
@soaringman 4 жыл бұрын
what is the black rubber plug for on one of one the tubes in the float bowl ? and does it matter if i lost one ?
@lundyracing 4 жыл бұрын
I believe it's a slow idle plug, not sure about its importance but each carb has one, bring one to the hardware store and get a similar size rubber stopper
@soaringman 4 жыл бұрын
LOL thanks for responding I actually found the one that had bounced away got the carb back together and I sold that bike
@derekwalk 3 жыл бұрын
how do i send my carbs to you?
@Mrbooboo1972 4 жыл бұрын
Sometime do a 2001 GSX-F 600 Katana. Inline -4 , mukuni carbsThat be nice to see. Difficult bike to find on here for watching hands on how too. It's an Underated motorcycle.
@stancoleshill8925 4 жыл бұрын
Most Japanese bikes are (?)
@tarassulyk6778 4 жыл бұрын
Hey! Thanks for sharing your knowledge! I feel like this might be a carbs case with my bike. I just have a problem with my honda cb400 1996. After riding for some time the throttle just stops responding and engine slowly stops.. And it doesn't start. After 10-15minutes it starts again and then after few kilometers the same thing happens. If i let it stay over night, it runs again like nothing happens. I could ride for an hour or so and suddenly it all happens again. Can the dirty carbs be a problem? Or should i look somewhere else?
@mad3arber 4 жыл бұрын
My cbr600f4 is the same. Only seems to do it in heavy traffic(or when hot)... I can ride all day on b roads as the bike stays cool 😎
@Dbs45315 8 ай бұрын
I'm 3 years late, but that sounds like a weak ign coil
@jonathandaul6243 4 жыл бұрын
Just need a video on the gaskets cause I can't find where they all go and the ones in there were destroyed
@ofueru2219 4 жыл бұрын
Man I wish i could be your apprentice You should be good teacher seriously Good video and good tips But got a question They always told us ''' do not introduce hard thing in the carburetor circuit it would damage them '' Is that true ? Can you explain thx
@TheMotorcycleMD 4 жыл бұрын
Thanks man! I’m not sure I understand what you mean by hard things.
@zwebslinger3526 4 жыл бұрын
@@TheMotorcycleMD He's probably referring to the guitar string you used.
@JDeezle21 3 жыл бұрын
F*CK!!! This video pissed me off and told me everything i was going to try and skip. This is great stuff.
@johncarlson8029 4 жыл бұрын
Mr Cody i don't know how to get in touch. I also live in VA and need a chassis checked for alignment. Plwase get back to me with some possible resources. Thanks John
@susdad 3 жыл бұрын
You make this sound way harder than it really is.
@edcallies9971 8 ай бұрын
1978 honda cb750k . AFTER caburetor cleaning the bike runs fine with the rear tire lifted off the motorcycle lift . Run through all the gears at full throttle fine. When i take the the bike off the lift and road test it the bike has no power sluggish. dont understand why when the bike is on the lift with rear tire raised it has power but not when i road test it . First time trying to use this hope i have given enough information
@edcallies9971 8 ай бұрын
i did sync the carburetors
@bmac5315 3 жыл бұрын
How much would you charge to rebuild carbs for a1980 cb750f super sport?
@TheMotorcycleMD 3 жыл бұрын
If you don’t need new accelerator pump and air cuts we could be a round $500 +shipping. If you do need those parts and more we could be around $700-750 because of the cost of parts.
@kaylaclark8460 Жыл бұрын
Where do you talk about the accelerator pump?
@adjbob56 Жыл бұрын
Rewatch the video. This is an overview and he clearly explains there is a full length complete rebuild video, which he charges about $40 for and that would be a bargain per all the time he took to explain things like your accelerator pump question
@Mrbooboo1972 4 жыл бұрын
Oh Shit... I have a question.. Is it better to go Aftermarket individual air filters like the K & N individual filters or stock air box...??? Thank you in advance. I've heard different things of course. ;)
@TheMotorcycleMD 4 жыл бұрын
Stock Airbox & filtration = consistent/reliable/all weather riding headache free Pod filters = Looks cool with slight performance upgrade 🤣👍🏻
@ericleger8158 4 жыл бұрын
Stock airbox, carbs benefit much better with a "still air region " in front of the intakes! The engineers knew what they were doing when it came to designing and development.
@Mrbooboo1972 4 жыл бұрын
@@ericleger8158 Yeah, Thank you. Wasnt sure. The Motorcycle MD., Answered right off. Was Great to get his input. I know he Definitely knows what hes talking about, Not saying you don't. I appreciate your Response though. Ty.
@soaringman 4 жыл бұрын
just rebuild the carbs on my 81 cb 750 today
@TheMotorcycleMD 4 жыл бұрын
Success!!!!
@soaringman 4 жыл бұрын
TheMotorcycleMD The kit came with the bike when I bought it and some of the pieces didn’t fit like the emulsifier tubes are way too big but I replaced a lot of the parts I got the bike for 300 bucks anyway so I’m doing OK
@FlyingSugarCat 3 жыл бұрын
Can you not just get rid of the vacuum operated fuel shutoff valve and just put a regular valve. I assume this will throw off fuel delivery...
@JirikM 4 жыл бұрын
Great video. Who is the man with axe? :-P
@markharrison5712 4 жыл бұрын
I don't have a 750 . I do have an 86 gold wing . A true barn find . 14,000 miles on her . Like brand new to look at !!! Down side …. No matter what I do she GAG'S …. Been through the carb's ( all 4 of them countless time's . Could this be a timing thing ??? or maybe the brain ???? I know the timing is belt drive . I'm not sure how to check the brain ???? Step up !!! help where you can . THANK YOU FOR YOUR TIME !!!
@TheMotorcycleMD 4 жыл бұрын
Sounds to me like you need to replace the accelerator pump!!
@markharrison5712 4 жыл бұрын
Thank you for your time . I'll replace them .
@sachsgs2509 2 жыл бұрын
Pro tip: Guys...if you never done this before trust me. DO NOT do it yourself. Take it to a reputable shop and have them done. If you decide to do them you will be sorry lol.
@adjbob56 Жыл бұрын
That is NOT a "Pro tip". If I had not started my first carb rebuild 40 years ago I would still be trusting some new hired kid at an overpriced shop to screw my stuff up. We learn from mistakes in life. If you are not willing to make a mistake and MASTER a subject, you will just noodle through life watching videos for something you will never do.
@sachsgs2509 Жыл бұрын
@@adjbob56 noticed one very important detail:reputable shop. You'll pay a little more but it will be done right and on time. I want to ride it not play with the carbs for a year....
@AICD1999 4 жыл бұрын
And just buy a complete kit, bowl gasket, orings, new float jets and seats. No matter how good they look just do it, specially these older bikes. Be careful with the steel wool. I just did my 1991 CBR1000F last month and the number 1 carb leaked. Steel wool in the float seat and somehow the floats where not adjusted to spec anymore.
@TheMotorcycleMD 4 жыл бұрын
Definitely have to be careful with it, blowing everything out is vital. (As explained in the full version) 👍🏻
@anonimous2451 2 жыл бұрын
Honestly bruh, there is enough free information out there as well as vid's on this process and just to rebuild a set of carb's you want 40 bucks ?? While IF I was doing anything else to the bike I MIGHT buy in, I understand you would like to be paid for your efforts, BUT, the ads get you paid enough to be able to GIVE AWAY a tutorial on this process. I respect your abilities personally and IF you give away something for free, you might actually gain a better support base for your other stuff. Just my $0.02 worth. Some things are not about the bucks, its about the experience. Money grubbin turns people off.
@Liltrevon1 4 жыл бұрын
Can you clean my carbs !!!
@gino2033 4 жыл бұрын
What I suggest is remove the entire Honda and replace it with a Harley Davidson. Like the story about this biker type riding in town spots a lil girl walking down the side walk he pulls up to her and says"Hey lil girl wanna go for a ride?" The lil girl just keeps walking not even looking at him. So the biker pulls up and says " Hey lil girl here is $10 come on let's go for a ride!" The lil girl head down keeps on walking. The biker type takes off going down past the lil girl to a candy store grabs a bag of candy and pulls up right in front of the lil girl blocking her way and says" Ok ok lil girl here I have a bag of candy & $10 what you say let's go for a ride on my bike!!! " The lil girl finally has had it and says " Dad you bought that fucking Honda you ride it!!!"
@TheMotorcycleMD 4 жыл бұрын
Hahahaha. Somebody needs to look into that Dad’s history. His tactics for picking up little girls on the side of the road are strikingly similar to that of a pedophile 😆 STRANGER DANGER!🤣
@gino2033 4 жыл бұрын
@@TheMotorcycleMD did you read the story? She was his daughter. She just wouldn't ride with her dad for anything he offered because it was a Honda.
@TheMotorcycleMD 4 жыл бұрын
Harold Gino Helgeson I did read it, that’s why I said “somebody needs to check into that Dad’s History”. He was probably riding a metro scooter 😆
Skitsville
Рет қаралды 19 МЛН
SPANNER RASH
Рет қаралды 79 М.
Jon's Motorcycle Rescue and Review
Рет қаралды 28 М.
Lilsnoop213
Рет қаралды 69 МЛН
Truck Drive
Рет қаралды 17 МЛН