This is such a great video. It clearly and concisely makes clear why you absolutely, positively do not want to do this yourself. Your sanity is worth more. Give it to the dealer. :-)

This video omits the part where you break several clips, crack decorative pieces of interior plastic, strip out a few screw holes, borrow another car to go to Autozone to find said broken clips and purchase crazy glue, and then never get your front fascia flush again like it was from the factory. Yup... taking my unopened honda factory oem fog light kit to the dealership so that they can do the install. Cutting bait on this DIY project even before I begin. (I some how expected this to be like putting Bosch Pilot driving lights on my 84 VW GTI … Oh well!) :D .

i thought that would be easy ...you just ruined my day ;)

I did this on my rsx years ago, its actually much easier then you think lol just a wire behind a bolt, then plug and play. You're removing a bumper with a bunch of clips and a few screws. Not crazy. That 120min estimate is even a bit high unless it's your first time doing something like this. Don't be intimidated ppl 😁

I just had mine installed at the dealer.. 200 bucks. well worth it.

One thing nobody shows: you need to adjust the lights after installation. In the factory they adjust the lights mounted in the bumper and then they place the bumper on the car. For adjusting of new monted lamp you must bore a hole in the lower part of the bumper ( the black plasic ) korresponding to the adjustmet screw in the fog lamp and cover it after adjustment with some rubber cap. You need a loooong screwdriver for the justage.

Um grande profissional trabalhando, você me ajudou muito com esse vídeo. Grato.

That task will be Ultra Hard, only advanced Honda technicians.

Holy Crap. I'm a big DIY guy but dang.

Ford used to leave the pigtails attached near the fog light openings, all you did was plug them in after attaching them and change the switch.

Hello, I have a 2013 CR-V and it is almost a year that has an intense vibration between 40km and 70km. It vibrates when keeping a steady speed, if I acelerate rapidly, doesnt vibrates.

My fog light works , but glass is broken. Can I buy ONLY the glass as replacement part?

Hello, I have a 2011 Honda CR-V Ex. This is the same installation for my vehicle.

How do i make it work where do i connect the other ground cable and the green plug

Well I guess I'll be calling all Honda Dealerships here in the Dallas Ft.Worth Texas area to do this job. I hope it's not to expensive.

I have a 2007, besides quality what is the main difference from the OEM style eBay fog lights to the OEM Honda fog lights? I don't think the eBay ones come with the switch yet they come with a push button type switch. Can you verify if the installation process would be similar? Price for eBay OEM style fogs are $35.99 and OEM Honda fogs are $274

which slot does the 20A fuse go into in the fuse panel? or, is there an empty, pre-existing fuse slot for fog lights already there?

Can you show me how to take off door panel, and door handle cover on crv 2007 new shape. Thanks a lot

hi, can u pls features the installation of HID to 2007 honda crv sport. or do u have any link how to change the headlight of crv? how can remove them? thanks

Well, i think i can make it easy💁🏼‍♂️. Get under the car, take off the botton cover and open the sides of the bumper(carefully) get under the car and cut the circle, install the fog lights and the wires... use an universal fog lights wires with a relay, just two directly wires to + and - of the battery, and one cord that goes inside the car for the switch, and them put the switch in an empty spot from your dash💁🏼‍♂️ no that hard

I NEED PART NUMBER # FOR TURN SIGNAL WITH FOGLIGHTS SWITCH PLEASE.

I was gonna get a pair of foglights then this video gave me a headache

Hi. But how to adjust the fog lights?

Good afternoon, I watched your video about the installation of fog lights at CRV, and I thought it was very good. I'm Brazilian and I really wanted to do this service in my car, could you help me with some kind of manual giving instructions on how to install these headlights. How: connection to be made, where to install the connectors, numbering of the pins I am using the original arrow with original activation of the headlights. I will be waiting for your reply, thank you.

Como puedo hacer las conecciones en un honda odisey 2006

(wow) and I was thinking of changing the headlights

What screws do you use? Have a part #?

Hi, where you connected the 20A fuse. I know it is in the fuse box but in which space, in the 21, 22, 27 etc. Thanks for excellent video.

excellent

This video might of answered my question: I have a 2006 Honda CRV and trying to find a new bumper but they all say "without fog light holes". My CRV has fog lights so I guess I buy the bumper without holes and cut my own holes, Right?

How much does this cost

How about Honda CRV Gen 4 ?

I was cringing when he was using the razor blade especially when he was cutting towards his hand, I was expecting to see him cut his wrist or finger at any moment. You need to get the right tools for the job both for safety and convenience. So if the bulbs burn out do you have to remove the bumper to replace them?

how much do you estimate this installation job would cost?

how do u replace the bulb?

It's easier to just buy the EX trim so you save yourself the agony of cutting your hands making a hole in your Bumper. Loosing brackets and few screws not to mention putting holes and scratches on your dash. By going with EX trim, you will also save the hassle of cutting up your roof,, don't even get me started on what could go wrong there? The leaky roof will be the least of your problems.

nice honda stanley crv

Eu tbm comprei esse carro ruim de troca faróis

Installation Instructions PDF: www.collegehillshonda.com/instructions/crv/2010/foglights.pdf

lindo

So, you just tucked the fog harness cable through to the engine compartment and tightened the ground but you never showed where it conects to the anything.

That is not a 2007 CRV. The kit that I bought from a Honda dealer does not have you make connections in the steering wheel column..

Now show us how to keep those expensive and obviously time consuming and difficult to install lights from getting cracked by rocks thrown up from another vehicle. They didn't last long on my '08 and I'm not about to go through this again to pay $160 in replacement cost for each light housing.

That's the wrong year. I believe that's a 2010, different front bumper.

not a DIY thing... obviously!!!

How much does this cost.

this probably I can't DIY lol.

I just need to change a light bulb...

Too much work for two foglamps. Not that serious in my opinion 🤔

Looks pretty hard unless you know what your doing, body man, mechanic, electrical work, more than average, how much does it cost to install on a 2010 Honda CR-V EX 4WHEEL ? Why not not just another rocker switch on dashboard, that would make it much easier than pulling the directional switch apart, you didn't show where the wires went or what it looked liked at all. Just a wiring harness and bam, you plug in to wires into to pins. Like we know unless you show what to look for, like the pin connector and color coded now. Also where you snaked it threw the firewall also. Its not a cheap kit but they due make them cheap and great name brand that looks easy, that comes with a rocker panel. Why not just plug the low beam light into wiring harness kit so they only work with low beams only, just like a trailer harness kit does. Same thing but the front and you make it hard.

i am going to punish myself and ruin my crv just for that fog light...HELL NO!!!!

It would be much easier to just not drive in fog......

120 min my ass

Omg noobs is not that crazy lol

NOPE.. some things are true DIY. This is not one of them for me.

Dislike. Seems to be only a music video; no explanation.