first check for any codes related to the tranny, with a scanner that has the ability to read a complete transmission data, if nothing is found, normally that is a mechanical problem or interenal issues. on these vehicles.

Transmission fluid 3rd clutch Pressure Switch 28610-RKE-004 this is the part number i highly recommend getting it from the dealer, and thanks for coming to my channel and if you have other questions dont hasitate to ask.

@@JM-AUTO I got that exact part from the dealer, but the plastic part is black and my original plastic part is white like the one you show on your video. Also the pin inside the plastic part is in the middle while the part from the dealer is slightly to the right. The dealer gave me the exact part number that you just gave me.

@@JayJum The replacement switch Honda sells can be have black plastic.

3DR clutch transmission fluid pressure switch, any autopart but better from the dealer.

@@JM-AUTO sweet thanks for the quick reply. also you think this can be done/replaced at home?

@@RICKtoSICK10 yes it cabe, it is very easy.

have you replced the switch? if you did and you get 12v then the problem is in tranny even though honda says this code can be caused by an electrical problem and not a mechanical problem but that is wrong info from honda, in so many cases this code is caused ny mechanical failure.

@@JM-AUTO that means my tranny is shot. But I still don't get why I have 12v instead of 5v clearly stated by Honda.

@@JM-AUTO So my problem actually got worse and a couple of other error came up. I thought replacing the trans was the only way to go. Alas, I was wrong. After spending money to replace the transmission, it was realized that Honda was right afterall. The error was not a mechanical problem from the trans. In short, my trans was in good shape and I trashed it for nothing. The problem was actually the ECU. Somehow, water got into it and messed things up. Others should learn from my misfortune.

thanks I appreciate it. im in NY what State are you at.

@@JM-AUTO NY too, By Brooklyn. Where in NY?

gracias por compartir Amigo.

sure check it out and come back and if you need to ask me any question and if I know the answer I will be glad to answer

thanks for your comment, what size engine you have on your accord and what code did you get? I can try to help you with some more info. God bless you and your family

Engine 2.4 Code p0848 thanks 🙏 @@JM-AUTO

@@alialghwidi283 ok can you check if you have about 5v reference? if you do, replace 3dr clutch switch b, if you dont, check for open circuit between blue white wire of 3dr clutch switch b and pcm connector {49p} on pin #9 which is the same color blue white, check for continuity, if you dont have continuity repair the short in the wire. let me know what you find and dont hesitate to ask me for more help, stay bless and good lack

The solenoids and pressure switches were checked using a computer, all working in time to open and close. The electrician told me that he no longer needed to check them with an ovometer to measure energy. @@JM-AUTO

@@alialghwidi283 ask the electrician what was the voltage he got when he checked the 3dr clutch pressure switch with out telling him the he is supposed to get 5v reference, because your answer does not convince me since you said that all solenoids were check ed when there was no need to do that since the code p0848 is trigger only by the 3dr clutch pressure b so there was no need to check other solenoids, olso if he told you that then he already should know the diagnosis of your accord. got the feeling they did it wrong. good lack. and stay bless you and family

I know need it to