@rnrudynh1427 Жыл бұрын
Reading the directions helped me alot when I stalling the winch on my son's 250 recon. The blue, yellow wires were too short and the red, black wires from warn were wayyyyy to long so I swapped them.
@Dr650rob 6 ай бұрын
The solenoid goes under the gas tank, using a ubolt type of mount to one of the frame tubes going down
@Shadow6a 2 жыл бұрын
You know there is a sub harness for the hand grips and winch on that model yeah?
@brettkoch3486 2 жыл бұрын
What is the brand and part # for the winch mount you used?
@dyland8364 Жыл бұрын
How did you splice the 12v connection? Did you use a sub harness
@JohnDoe-dk8zz 2 жыл бұрын
Can you link the winch mount and the winch from Fortnine website ?
@bm5666 2 жыл бұрын
Did you have to trim the plastic at all for the winch to fit. Others have mentioned that trimming is required with the kfi mount. Just curious.
@dr.dansgarage 2 жыл бұрын
No, it didn’t require trimming. Once in, it fits well.
@michaelmontes7583 2 жыл бұрын
@5:20 I think those might be positive and negative whips to splice onto if needed
@tylerm7403 Жыл бұрын
Did the winch come with the switch and everything needed? Besides the mounting plate.
@dr.dansgarage Жыл бұрын
Yes, it came with it all. Still looking and working great after over a year now.
@andrewcurtis2605 2 жыл бұрын
I must have missed how you mounted the solenoid. Zip ties?
@dr.dansgarage 2 жыл бұрын
I used those 1/4" grade 8 bolts through the frame. Overkill I'm sure; but it's secure.
@kylemacdonell1450 Жыл бұрын
@@dr.dansgarage You drill through the frame.. NOT A GOOD IDEA
@bobbybest2909 2 жыл бұрын
How many pound winches is that? is that enough if this vehicle gets buried
@dr.dansgarage 2 жыл бұрын
It’s 2500 lb. If it’s stuck enough to need more than that, then block and tackle style pulleys can be used.
@handymike6550 2 жыл бұрын
I cannot believe you drilled the frame. 😖
@dr.dansgarage 2 жыл бұрын
If it ever causes a problem I will report back. I’m currently not worried about it and it still looks great.
@martinmatteau8350 Жыл бұрын
Dude drill the frame HAHA
@rnrudynh1427 Жыл бұрын
Holy shit you just voided your warranty by drilling through the frame. 3-4" from the hot exhaust..?? Yikes. Good luck
@dr.dansgarage Жыл бұрын
I checked on it a month or two ago. It still looks totally fine. If it ever causes trouble I’ll fix it; but I doubt it will ever need it. Would nylon straps have sufficed and been better? Perhaps.
@v1antbo Жыл бұрын
Bad move on the holes in the frame. Storage area would have been better
@dr.dansgarage Жыл бұрын
I’m keeping an eye on it. A year later and it still looks pristine. If it ever causes problems I will repair it. I doubt it will ever cause problems.
Max's Moto Shop
Рет қаралды 29 М.
Jason Derulo
Рет қаралды 30 МЛН
TK Powersports
Рет қаралды 41 М.
Dirt ObseXXion
Рет қаралды 547 М.