Рет қаралды 103,426
The charging cable path for the Honda Tiger / Mega Pro motorbike, the battery quickly comes out, drops, dies. The first step we have to do is 1. First find out the charging path from the yellow road spool, there must be both current and enter the bottom left and right kiprok.
2. the red cable is the output from the kiprok that goes to the battery plus and the contacts make sure there must be current.
3. The black wire is the 12 volt current that comes out after the ignition is turned on, and is divided into the main lights far near, tail lights, brake lights, horns, cents.
4. the green cable in the upper right kiprok socket is the time for kiprok.
so the conclusion is:
1. make sure the two yellow wires that are 2 from the spool must have current.
2. Make sure the red wire from the kiprok that goes to the ignition must have a current to make sure the kiprok is good or not.
3. Make sure the fuse is not blown.
4. make sure the kiprok on the right must be connected to the body or motor frame.
Thank you very much to all #SIBSCRIBER#and viewers, hopefully the knowledge is useful.
Please #SUBCRIBE and LIKE.
#SIDIK NURYADEN CHANNEL
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.