Honda Transalp Fog Light Install!

Рет қаралды 3,129

Күн бұрын

10/10 Recommend these FOG Lights!
sw-motech.us/products/safety/...
Honda Transalp FB Group: / 1025638205304015
Chain wax: amzn.to/4a1bonr
Chain Cleaner: amzn.to/3Neari2
Chain Brush: amzn.to/3R5ouaQ
Ram Mount Phone Holder: amzn.to/460ktdd
CLICK HERE: amzn.to/3NQOsii
📬 SEND ME STUFF📬
TTorres1183
P.O. BOX 5694
1910 Navarre School Rd
Navarre FL, 32566
▬▬▬▬▬▬▬▬FOLLOW ME▬▬▬▬▬▬▬▬
📸Instagram: @TTorres118 / ttorres1183
👻Snapchat: TTorres1183
📬 Business Email: TTorres1183@yahoo.com
FB Page: / ttorres1183
DISCORD Server: / discord
** Affiliate disclaimer: some of the above links maybe affiliate links, which may generate me a sales commission. For example, my KZfaq Gear listed above is in association with the Amazon affiliate program and I’m an amazon associate.. "

Пікірлер: 12

@TTorres1183 4 ай бұрын

Honda Transalp FB Group: facebook.com/groups/1025638205304015/ Chain wax: amzn.to/4a1bonr Chain Cleaner: amzn.to/3Neari2 Chain Brush: amzn.to/3R5ouaQ Ram Mount Phone Holder: amzn.to/460ktdd

@ride-fly-dive 4 ай бұрын

Great performance! I did something different. I bought the Puig v2 and connected them at OEM plugs. So, i can handle them by the Function button and no need for additional switch. With 1000 lumens each (2000 both) any night riding is totally different. About the heated grips, all winter i went between 2 and 3 scale. At 4 you feel your hands burning!

@TTorres1183 4 ай бұрын

I wouldn’t know what it’s like to have heated hand grips

@Luk4s7St 4 ай бұрын

I’m going to do the same but with those from SW-Motech light. Did you wire them directly to OEM connectors or used relay and took power from battery while OEM connector for on/off signal only?

@TTorres1183 4 ай бұрын

The SW Motech kit comes with a switch and I wired it directly into the battery

@ride-fly-dive 4 ай бұрын

I connected them at the OEM plugs. Have only one think in mind. Honda has an accepted electric load until 15 W per light. If you go to something higher from this, you will have an error message at the dash as ECU will read overloading. Before buy the additional lights read carefully the watt consumption and mainly the lumens efficiency. More watts do not mean always more lumens @@Luk4s7St

@Luk4s7St 4 ай бұрын

@@ride-fly-divethanks! Motech draws the 12W per lamp to should be good! I like clean dash and minimal cabling.