Thanks dude! Ik these were super easy!

You forgot to turn the heater on and to fill the reservoir.

i just had to replace my thermostat.. in the video he used a 10mm wrench, i used a long socket and it worked better for me if anyone has trouble with it

1:15 needs silicon spray only. The listed choice will eat @ a rubber hose and should be used on metal objects vs rubber

You forgot to put the heater on?

Great video. Very insightful and informative. Thanks for sharing.

What years does this apply to?

How much Anifreeze did u use to refill it

I bought the exact same thermostat from rock auto. I noticed in the video that you did not use the new gasket that came with the new thermostat. I also could not use the new gasket because it is the wrong gasket. There is not a small notch at the top of the new one to fit into the house correctly . I had to use the old gasket just like you did.

Great job

My housing is stuck. How hard can I wrap in it to crack it loose? (don't wanna crack the housing(

Thank youuuuuuu🫶🏿🫶🏿

Do u have to bleed the system after installing thermostat or also heater control valve

Great video brother God bless you and your family and friends don’t forget Jesus Christ is coming back very soon so remember to repent and accept our Lord and Savior Jesus Christ into your heart. ✝️✝️✝️🇺🇸

This video did not work for my 08 Accord V6. Throttle body needs to come off, there’s no way to get the rear housing bolt out without removing parts. I have little mechanical knowledge so now the car is going to our shop. Be careful trying this if you aren’t experienced.

Those needle nose pliers that are bent funny those are spark plug wire pliers they’re not for hose clamps but if they work use them lol. ✝️✝️✝️🇺🇸