My MaxpeedingRod lowered Honda CR-V RD1 is ready for Alignment

Рет қаралды 2,824

5 ай бұрын

In this episode, I finalized the suspension on my lowered RD1.
I installed Three 5 ball joints, Three 5 sway bar end links, new outer tie rod ends, Maxpeedingrod front camber kit, and a rear camber kit.
Check out the merch to help support the channel - hondaresource.com/collections...
Thank you for watching!
Front Camber kit www.maxpeedingrods.com/produc...
Coilovers www.maxpeedingrods.com/produc...
Rear camber kit amzn.to/47Ih3fW
IG: / hondaresource
#thehondaresource #hondacrv #rd1 #b20 #crv
Want to send me some cool stuff?
The Honda Resource
43 Quail Ln
West Blocton, AL 35184
Want to save some $$$
Code YEET1 on www.maxpeedingrods.com/

Пікірлер: 44

@sideswipe3022 5 ай бұрын

Its crazy how a crv can look so good either lifted or lowered 🔥

@hondaresource 5 ай бұрын

Thank you

@yigitmert4232 4 ай бұрын

@@hondaresourcehello.2010 crv stops in my car, praise, such a sound comes from the auxiliary gearbox when changing gears, what do you think is the reason, why does this sound do you have an idea

@yigitmert4232 4 ай бұрын

@@hondaresourcekzfaq.info/get/bejne/bLhhpryerbC3mpc.html

@nateoreilly6885 5 ай бұрын

Good stuff!

@bdeheton6445 13 күн бұрын

What engine or engine mods do you have in that thing? Sounds sweet.

@DangerousDave4U 9 күн бұрын

Does it have better handling ready for the track? Do you recommend a strut tower bar?

@donaldfee9101 2 ай бұрын

i have a 2001 crv with bed and table.i think it is the sport model .i believe it has a rear and front sway bar is this possible

@julioortega3263 4 ай бұрын

I just changed my ball joins and it I keep getting a crooked wheel any ideas

@Pr4dagee 2 ай бұрын

damn i need to do all this lol

@hondaresource 2 ай бұрын

Do et

@johnvela8189 5 ай бұрын

What kind of question is that... lol looks possibly but it's git function in lowering it... center gravity

@Chunkyboyallday 4 ай бұрын

No need to swap out rear toe arms for adjustable ones to correct the toe after being lowered ?

@hondaresource 4 ай бұрын

No. The factory has enough adjustment

@Chunkyboyallday 4 ай бұрын

@@hondaresource you are a life saver. Thank you

@edizero1278 5 ай бұрын

Hey bro I have a 99 crv and I just took it all around town trying to get it fixed, my radiator started leaking after a trip to Ocotillo, must have cracked I'm assuming, just wanted some advice

@hondaresource 5 ай бұрын

Definitely a possibility

@Steven-it1ou 5 ай бұрын

Looking to refresh my suspension for my rd1 what should i buy? Its my daily driver and it has 300k

@hondaresource 5 ай бұрын

Stock, lowered, or lifted?

@jack.crv-R 5 ай бұрын

@hondaresource I have an rd1 with the air intake box thing, ( the one between the valve cover and firewall) I have fitted an aftermarket intake and I want to remove the silver metal box the intake goes into. I think it's really quite ugly in the engine bay. Does you or anyone know what the function on this box is and if removing it would effect the power?

@hondaresource 5 ай бұрын

It's an air intake plenum, it helps with torque.

@jack.crv-R 5 ай бұрын

@@hondaresource ok, probably best to leave it there then!? 😅 It's the least of my worries anyway! Car feels like it's sluggish on power when engine has warmed up. Hoping a transmission fluid change will help. If not then check the brakes! 🤞

@asylumline9744 5 ай бұрын

Man I really love your videos. I have a huge question. I recently purchased a 2001 Honda CRV EX with AWD that was mentioned to have a bad transmission. I picked it up and had to jump-start it. However, when I attempt to put it into any gear, nothing happens - no jump, no grind, but the selector goes into all gears smoothly. It's currently dark, so I can't check much. Is there anything specific I should inspect, and based on the symptoms, any idea what might be wrong with it? Appreciate your help!

@hondaresource 5 ай бұрын

Auto or manual?

@asylumline9744 5 ай бұрын

@@hondaresource auto the gear selector goes into all gears great but transmission never does

@hondaresource 5 ай бұрын

3 possibilities. 1) cable isnt properly connected (unlikely) 2) no fluid in trans 3) trans is toast

@asylumline9744 5 ай бұрын

@@hondaresource I appreciate the feedback let’s hope for the first two lol I did order a fwd trans already from hmo to get it back on the road for now

@asylumline9744 5 ай бұрын

@@hondaresource So Im still waiting on my transmission to come in I got home from work figure I would play with the CRV alittle I checked both sets of solenoids and they checked out good. I also checked the range switch and it also is working. I put it into reverse and got it to back up 15 feet no bad sound no grind stopped put it into drive nothing put back into reverse nothing. its very odd to me

@stretchwakefield4832 3 ай бұрын

What's the stud pattern?

@hondaresource 3 ай бұрын

5x114.3

@vitoosss 5 ай бұрын

Excellent clearance at the front, but dropped too low at the rear☝️ And the rear right wheel has too much camber compared to the left one🤔It looks like this in the video

@hondaresource 5 ай бұрын

I might make some adjustments before alignment then finalize everything at alignment

@robertdiehl9003 5 ай бұрын

Surprised that this crv does not have rust on rear quarter panels above tires..

@hondaresource 5 ай бұрын

we dont have rust in Alabama.

@chucho-co1yy 5 ай бұрын

can you give me a estimate on a timing belt and water pump installation. my timing belt is still working. just piece of mind. thank you it's a 1998 honda crv

@hondaresource 5 ай бұрын

email me, phillip@thehondaresource.com

@phaxiong95 Ай бұрын

Philip you don’t do your own alignment?

@hondaresource Ай бұрын

Nope. I just take it and have it done

@phaxiong95 28 күн бұрын

@@hondaresource Philip I’m having problems with my 99 crv it quits whenever it wants to, looking KZfaq they say it’s probably my ignition switch and wire harness