In this video I will show you step by step how to replace Honeywell zone valve motor, power head , and ball valve. www.supplyhouse.com/Honeywell...
Пікірлер: 36
@BigZaddy211211 ай бұрын
Outstanding! Thank you for the very clear and concise demonstration...... You`re saving a lot of people money! Thanks!!!!
@namejm5176 Жыл бұрын
Alex, Thanks for the great video. What you described is exactly what was wrong with mine. The ball valve was stuck and your video showed clearly how to handle that!
@alexthehandyman3494 Жыл бұрын
Hello Jm. Im so glad. Thank you so much!!
@conradviray5865 Жыл бұрын
Thanks for your showing how to troubleshoot actuator valve and replaced.
@alexthehandyman3494 Жыл бұрын
Thank you!! I have more videos about zone valves, Look f0r them in my channel.
@GreenEarth1406 ай бұрын
Thank you for your fantastic video. GREAT EXPLANATION !!!!!!
@alexthehandyman34946 ай бұрын
Thank you so much!!
@user-bv5sg3bj1l5 ай бұрын
super helpful thank you so much!!
@user-mt9yz9tz8s6 ай бұрын
Thanks, keep helping beginners!
@alexthehandyman34946 ай бұрын
Happy to help!
@AlexM-vt5pu5 ай бұрын
Great video!! Thank you. My shut off valve will sometimes not open and I have to manually open it. It will randomly get stuck on close once or twice a week. What I do is manually open it and then it works again for a few days. I’ve been thinking or replacing the valve but not sure if that’s the real issue.
@drodNY Жыл бұрын
excellent video.. thank you for sharing.
@ibrahimnaser7142 Жыл бұрын
Thank you , I needed this video
@alexthehandyman3494 Жыл бұрын
Thank you so much!!
@J4Julz5 ай бұрын
Very helpful, thank you
@abbate2137 Жыл бұрын
Hello Alex. first off I just wanted to say thank you for making these very informative videos. I have a question I was hoping you might be able to answer. I currently just had two zone valves that were not working. I noticed this due to the red lights not coming on on the TACO box. I replaced them and when I turned the power on, all three zones lit up red on the TACO box. So it was indicating all 3 zone valves were open. However one of the brand new Honeywell zone valves is not engaging the end switch but the TACO box is still showing the red light. How is this possible?
@charlesw8715 Жыл бұрын
Great video, very helpful info. My situation is a little bit different. As soon as I turn on the heat in my thermostat, I can hear the valve gear turning and then some water(cold at this point) would flow through and I also heard water flow sound for a few seconds at the baseboard. Then furnace would start(then stop when it reaches 180f), but the hotwater is not reaching the baseboards, and when I touch the pipes around the zone valve , it is lukewarm. It feels as if the value opened then closed? Is that even possible. I have 4 zones, 3 are working without any issues. Any suggestions? TIA
@alexthehandyman3494 Жыл бұрын
Hello Charles. 1. Make sure all the wiring follow the same pattern ss the other 3 that work. 2. Make sure all the connections are tight. 3. Swap a good thermostat on the one that doesn't work right.(to rule out the thermostat) 4 Make sure that that zone is not air bounded. Bleed it if necessary . 5. It might be time to change the power head. Some times the dial thing spins but the gates failed in the closed position. the motor gear turns but not the actual valve gate.
@soulme81868 ай бұрын
Thank you Sir
@KidFifty Жыл бұрын
Thanks for this video. I can open mine manually, and I am hoping that means that it's just a bad motor. The motor is really warm compared to the other zone that is working. Feel free to let me know your thoughts.
@alexthehandyman3494 Жыл бұрын
if you have 24 volts to the valve and if you force it open water runs through it. Then is very likely it is just the motor . Good luck. . let me know how it goes.
@namejm5176 Жыл бұрын
Thanks!
@alexthehandyman3494 Жыл бұрын
JM. Thank you so much$$$. I appreciate it.
@jspinosa50 Жыл бұрын
Great video thanks
@alexthehandyman3494 Жыл бұрын
Thank you John. Have a good one. FYI. I have a channel totally en Espanol. "Alex the handy man en Espanol"
@jspinosa50 Жыл бұрын
I'm of Italian descent, thanks anyway🤣 @@alexthehandyman3494
@alexthehandyman3494 Жыл бұрын
@@jspinosa50 ha ha no problem. I thought you were Latino. Judging by your last name .
@christianconstante1008 Жыл бұрын
Thank kindly Alex for the HELPFUL video. Is the power switch from the boiler different from the power switch from the Electricity? Thank you.
@alexthehandyman3494 Жыл бұрын
Hello Christian, Most boilers should have 2 switches: 1 the boiler switch by the boiler. 2 the emergency red box switch. A lot of them only have 1 by the boiler. It is code now to have an emergency switch outside the boiler room. It should be on its own breaker . Although I have seen them on the same lighting breaker for the boiler room.
@xuyangliu14958 ай бұрын
Thank you Alex, very well put together video. May I ask your opinion on this: I have a boiler heating system with 3 zones, my radiators in zone 2 stay hot no matter even if thermostat is shut off. My best guess is the ball valve is stuck in the open position, so the hot water consistently flows thru the radiators. Any other thoughts?
@alexthehandyman34948 ай бұрын
Hello it could that the motor failed in the on position and the end switch is pressed continuously . See my latest video tonight or tomorrow. Or it could be the ball valve as well. Good luck. let me know what fixes it. Greetings!!!!
@crackerwithattitude80008 ай бұрын
@@alexthehandyman3494im in an apartment building fixing a specific units heat, constant heat coming in, the ball valve is the only thing that makes sense but I dont have the motor with an end switch, just a 2 wire(orange and yellow) already replaced the motor and unplugged thermostat, turned water back on and it flowed right through still. Lol
@secn2nunn6 ай бұрын
Hi Alex, do you have to bleed the lines after this? If so, whats best way? Thx
@alexthehandyman34946 ай бұрын
it depends on your system . If you had isolation valves. then ho\you don't have to do anything. Very little water lost and very little air went in. The air scoop will take care of that. IF you didn't have isolation valve and lost lots of water then. yes. Hopefully you isolate all the other valves and you just have to bleed the one you fix. Look at other videos on my channel about bleeding the line.
@tomclose66436 ай бұрын
hi is it ok to just stop using zone valves and manually open valve and leave open all the time so when other zones are called this open pne will always get hot water?
@alexthehandyman34946 ай бұрын
Hey Tom If you are ok with that. IM ok with that. Just know that since is manually open , it will never close and might get too hot in that zone. But to anwe3r your question: Yes. Make sure you properly open it. Don't forget to hook it> And leave at hook for to seconds so it stays. Good luck!!