I love the direction of this build. Every single mod is another step in the right direction. I also saw when you posted your parts for sale on FB. So cheap!!! You're very generous with your pricing, so I'm sure it's all been snapped up by now.
@HoonTV2 жыл бұрын
Thanks Craig. Still a few things available
@thewraith63602 жыл бұрын
Depends what you want to do but if you're going to run radial on a well prepped tracked you actually don't want alot of weight transfer to the rear you rather have a heavier front than rear so the rear can extend easier. Now if you plan to run a slick and do some no prep or crappy prep stuff then moving the engine back will help. The radial stuff is what everyones going after these days cause its usually faster steadier down track and no wheelie bars.
@MrDattopet2 жыл бұрын
I put some of the 55mm roof blanket in my shed helps heeps with the rain and good videos again have been catching up on a few
@kenmackay92762 жыл бұрын
And Boxer that block at Bullet that you didn't show us the name on , was the name Boxer ? 😀( Everything crossed it is ) , as you are building a new motor . 💪💪💪
@Low7602 жыл бұрын
I was hoping that too
@fossilfuelenthusiast2 жыл бұрын
Another 2 years off the road coming up 😉
@HoonTV2 жыл бұрын
Hopefully not!
@0oDaMange8882 жыл бұрын
Congrats on your 60000 maaan! MAD!❤️🔥👍
@LRogan5202 жыл бұрын
Cheez looking forward to the up and coming videos on the upgrades..your really changing it up..
@fatburga2 жыл бұрын
Billet block🥳🥳🤞
@HoonTV2 жыл бұрын
Welllllllll :P
@efxr65382 жыл бұрын
Loving the updates!
@john_p2 жыл бұрын
9:20 I fucking love that turbo
@john_p2 жыл бұрын
inevitability
@HoonTV2 жыл бұрын
👌🏻
@kenmackay92762 жыл бұрын
We'll Boxer you have done it again , just when I thought I understood everything , I was confused , I thought you were going G57 , not GTX55 , and what's going on with the rebuilt 998 with the new billet crank , I'm running the hi pressure Canton 3qt Accusump with the 55/65 psi electric valve , why did you choose a manual valve ? I'm also running a Clear view billet spin on oil filter unit , mines a 6" , is your 6" or 4" . Once again in there hanging to see the upgrades and you driving the old girl HARD . Can't wait to see your huge Smile . Go hard Boxer . Cheers
@HoonTV2 жыл бұрын
I have an electronic valve, that’s just the one that comes on it :)
@trentcrompton95272 жыл бұрын
👍
@goosegarage782 жыл бұрын
@HoonTV "im not gonna run a 8 second quarter with a gas engine" why not? you havent talked with racing jason at tunnel vision turbocharging. because he already did.
@HoonTV2 жыл бұрын
Absolutely. I know if another car that running good numbers with one too. I was more leaning in the flat 8 second pass. I’m sure it’d be amazing if it was possible, but I’d rather be running a built engine.
@lachlanwoods39402 жыл бұрын
Hi Boxer, keen on the Barra spares your not using this time round mate, what sort of dollars are you chasing? 🤔
@HoonTV2 жыл бұрын
Hey man, I’ve posted them on a couple of Barra groups on FB. Sump and fuel tank are already gone.
@lachlanwoods39402 жыл бұрын
@@HoonTV Cheers mate! 👍👍
@mooksmacca95412 жыл бұрын
Nice ute mate what colour is that?
@HoonTV2 жыл бұрын
Just good ol grey. 3 parts black, one part white
@benni7272 жыл бұрын
how much for the sump?
@HoonTV2 жыл бұрын
Sold already sorry
@Low7602 жыл бұрын
Doesn't Broomy need a haltech for his Barra Mazda?
@HoonTV2 жыл бұрын
I think he’s going std ecu?
@Low7602 жыл бұрын
@@HoonTV last few videos he said about how stock adds up to 2k so haltech it is.
@pauls35852 жыл бұрын
What is the best barra engine to build for boost?
@HoonTV2 жыл бұрын
A HP Junkie one :)
@goosegarage782 жыл бұрын
LPG BF after 06/06 because the use the FPV bottom end and 3R conrods. ford learned the hard way after bending the cranks in the BAs