This video shows a Hoshizaki ice machine that is not working properly. The machine froze into a solid block of ice because of a bad bin control switch. I walk through the process of diagnosing the problem and fixing the problem.
Пікірлер: 49
@HVACRVIDEOS7 ай бұрын
Awesome stuff bud! Its crazy that evap is already going bad I can tell its been replaced before too... the quality just isn't there anymore with the Hoshi machines
@IceMachine4117 ай бұрын
Those burn marks are a dead giveaway lol. You’re 100% right about the quality going down hill. I’ve only been doing this for about 3 years and I’ve noticed it myself. Also. Big fan of your work. Super cool to get a comment from someone that my coworkers and I have watched and learned from over the years.
@ronaldinabinet775028 күн бұрын
At first I thought the refrigerant was low or condenser/cleaning issues the problem. A lesson was learned! That was a good infestation....
@ronaldinabinet775028 күн бұрын
Investigation...
@IceMachine41128 күн бұрын
Lol
@IceMachine41128 күн бұрын
It was tricky. I almost missed it. Speaking of infestation. Have you ever seen critters in an ice machine?
@ronaldinabinet775027 күн бұрын
Not yet... I'm just trying to help out a small bar close to me!
@MariosACandRefrigeration7 ай бұрын
The way you found the ice on the shoot, is saying bin control.good call thanks for sharing.
@IceMachine4117 ай бұрын
Wish it was the first thing I checked.
@navjotsingh-lr6nn7 ай бұрын
Thank you . Way you tell so easy and understandable. Thank you huge respect.
@IceMachine4117 ай бұрын
Appreciate the compliment and support. Thank you.
@hist-explore79097 ай бұрын
Thanks for this video i keep on watching bro. Watching from uae
@IceMachine4117 ай бұрын
UAE! Was there in 2012. Al Dhafra AB. Glad to know you hist-explore.
@keovongvilaykeo47997 ай бұрын
Thank you 🙏 always great video 😊
@IceMachine4117 ай бұрын
You’re welcome!
@crystalcleanappliance59037 ай бұрын
I thoroughly enjoy these videos!! new subscriber.
@IceMachine4117 ай бұрын
Share these videos with people you know who are interested in learning about ice machine service. Many more posts to come. My goal is 1000.
@zekenzy64866 ай бұрын
Great Video. Thank you for sharing
@IceMachine4116 ай бұрын
You’re welcome. 💪🛠️
@ryancolbert17014 ай бұрын
Nice vid, good explanations.
@IceMachine4114 ай бұрын
Right on bro! I appreciate your compliment. I hope you got some value out of this video.
@Shawn_RHVAC7 ай бұрын
Definitely looks like the bin control failed and allowed the ice machine to run and fill up into the chute and once the curtains opened the machine turned off. The buildup of ice in the chute froze up and once the ice in the bin was used up the switch may or may not have reopened, but the chute was now plugged up. Just my thoughts and experiences
@IceMachine4117 ай бұрын
Definitely looks like that. 👍🫡
@shine-cg9uf7 ай бұрын
🇺🇸💪👍❄️ great informative video thanks for sharing much appreciated
@IceMachine4117 ай бұрын
You’re welcome! Good to see you again!
@raviyadav87435 ай бұрын
Thanks for sharing,
@IceMachine4115 ай бұрын
You’re welcome
@freefunky8307 ай бұрын
awesome stuff
@IceMachine4117 ай бұрын
🔥
@MrJEEPJT7 ай бұрын
Excellent video 👍👍 due to the background noise couldn’t hear your comments on the dip switches. I haven’t gotten the opportunity to work on Hoshizaki’s in a few years. I recall tech support mentioning the dip switches “1” and “2” and the importance of the Internal diameter of the inlet water lines feeding the ice machines being very important. So many of the ice machines regardless of the brand were crammed into small spaces and fed with braided water hoses which restricted the proper water flow. Can you comment on recommendations on the dip switches settings based on some of the conditions you find ???
@IceMachine4117 ай бұрын
Yes it was loud. I don’t really mess with any of the dip switches except for dip switch 1 & 2. I won’t change any other switches unless I’m being told by tech support or I have something in writing that says to change them. 1&2 off = shortest harvest 1&2 on = longest harvest Watch a harvest cycle and if there’s still cubes on the evaporator then turn on dip switch 1&2. (assuming everything else is correct)
@MrJEEPJT7 ай бұрын
Yes longest harvest wasn’t 1 of those switches for a longer flush cycle ??
@IceMachine4117 ай бұрын
Maybe. I’d have to read the manual, don’t have it memorized.
@michaelmooreargumentativespeec6 ай бұрын
Yoooooo you’re a tech too? It’s Moore.. I found your video trying to diagnose a Hoshizaki
@IceMachine4116 ай бұрын
What’s up buddy!? Email me. Icemachine411@gmail.com. Maybe I can help you out.
@frankevans5887 ай бұрын
Good stuff brother, just subd
@IceMachine4117 ай бұрын
Right on broski! Thank you.
@harrydickson45757 ай бұрын
👍👍👍
@IceMachine4117 ай бұрын
👍
@santoshsubedi94494 ай бұрын
what to do if the ice machine is making ice but not falling even after changing float switch, control board water inlet valve and water filter. Also cleaned the whole ice machine
@IceMachine4114 ай бұрын
Does the machine cycle into harvest? What are your harvest pressures? How is your water flow down the center of your evaporators? Is your thermistor working properly? Is the evaporator clean? There are lots of possibilities. It’s really hard to diagnose without knowing the specifics.
@user-ff5jx7fl8l5 ай бұрын
Got a question 🙋 about the evap crome plates Change is not easy?????
@IceMachine4115 ай бұрын
Change is not easy. Don’t do it unless you’re with someone who has done it before.
@criticaltemperature33437 ай бұрын
Man, i haven't worked on a hoshizaki in years. Frankly im not a fan either. Is that a KM series machine by chance ?
@IceMachine4117 ай бұрын
It’s either a KM or KML. I can’t remember off the top.