Excellent washing action! Everything moves freely stays under the water! And, the washer was NOT overloaded!! Excellent final spin!!

So impressive. One of the best top load washer that I have seen in last fell years. I loved that sound when you removed the magnet in the final spin.

Ah yes. My childhood washer machine! Thanks for making this

Impressed. That’s pretty decent action for a modern machine.

I have this same washer in my mon house since 2015 and is still works fine, and I also have a (probably 90s) Kenmore 70 Series Direct Drive washer in my grandma house and it also runs great.

I love Ge

Good agitation! I'm impressed!!

These and the stainless steel tubs seemed enormous in these GE washers

I wish my top loader was this quiet.

Nice washer! What other washers do you have? I like hearing the long drum roll on the cabinet with both hands like you did on the GE from 1995 in the long drum roll recording.

I didn’t know these had a break.

I have the "hydrowash" (pretty much the same macine), but mine doesn't spin after the first drain - it just drains, then sits there and then starts filling for the rinse cycle, and it only fills about 25% (but fills fully when starting the load). It then agitates and does the final rinse. This is on the permanent press setting. How do get it to spin after the first drain (different cycle?) and how do i adjust the pressure so i get more water during the rinse? Could my valve thingy the rubber tube fits on be bad?

When I opened up my ge / hotpoint it will sound like a space ship

1:01:27 - Interesting of how when you take the Magnet off the Lid Switch, it causes the Washer to do a Spin Brake. 🤔 Even in my guess of why you did that is 'cause you don't want to wait until the Drum came to a complete stop on it's own 'cause of how long it'd take for the Drum to freely slow down & that's why you did that to have it stop quicker with the Spin Brake, right? 🤔

Essa maquina é o puro ódio, parece as lg top load de 18kg fazendo comprecao, puro ódio e fofa essa maquina kkk

Can you do a colours cycle with power rinse and cold water with large load?

Out of curiosity, what is the Model Number of that Hotpoint Washer?

How did you get the water level to fill so high on the rinse cycle.?

1:01:29 Spin Brake

New subscrived

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

I hope you can get a Whirlpool/Kenmore Direct Drive Washer somewhere down the road.

Hotpoint has always been GE's low end line of appliances. It's not that they don't do a fair to good laundry job. It's their designs that cause their own breakdowns as time goes by. Their transmission is positioned vertically off center of the tub --- so they put a concrete block and bolted it for balance when the spin starts.. Now let's just have a little think about that. First concrete will wear, and quickly with motion. When those bolts come a bit loose, then the concrete block can wiggle, causing lots of noise. Eventually the block will start to hit the insides of the cabinet and maybe make it walk around some. This is NOT good engineering. It is what in the industry is known as 'planned obsolescence'. The best top loaders I've ever found are the ones that model after the Kenmore/Whirlpools. Direct drive, electro-mechanical timer, large SS tub. Simple to use, works grand and easy to service.

How'd you get the water to fill all the way to the top?

I had this washer beginning of 2019, however, it was the other GE version with GE logo, and had it for eight or nine months, and it was horrible. I always used highest water level, whites set to the longest wash time, power rinse, and it did a bad job with items only at half tub. Not to mention as it would fill for the rinse water, the washer would start to agitate with little to no water, and it was a fast agitate. It had ripped so many clothes, sheets, blankets I was spending more money on clothing than anything. How come did this machine do so good?

This washer is mostly the second to third best from speed queen.

is this washer he or traditional? anyways i love this machine

That my 🧔 washer

The motor sounds extremely strained. Is it suppose to sound like that?

what year is this machine?

American ones are so different I like american machines but i do like european a bit better as they are more economical but it's a good machine My cylinda does not nearly have that much water in the wash not even on high waterlevel

It makes a lot of strange sounds, something is happening, something is being damaged in that machine.

Too bad none of today's top loading washers have a spinning drain!

Man, using the motor in reverse to stop the drum from spinning instead of brakes... that sound just made me cringe.

1:01:27 Brake

This washer sucks. Filter Flos and chug chugs are better. The HydroWave was just a very cheap design. Mine only lasted like 6 years before dying. The bearings were shot in that machine also. And then it started making this loud grinding noise during agitation. And eventually, the machine just would not spin or agitate. And it also cleaned worse than the Samsung. The only advantage of this washer is that it does not have a lid lock. 6 years is not a good lifespan for a washing machine. My Samsung reached the 5 year mark with no repair. That is proof that HydroWaves suck. Mine had the stainless steel drum and electronic controls tho. My mom actually gave it away to her friend after replacing it within 3 years. Forgot the model number.

Give me a machine from the 50’s, 60’s or 70’s. Sorry, I find this weak& a snooze.

Junk... lol