We just had a well drilled in Oklahoma. Total depth was 180 ft. Pump set at 140 ft. Flow is 18 gallons per minute. $7000.00 complete. The water is a little hard but is treatable with a softener and RO for drinking water. I feel lucky to have the well we have.

Thankyou thankyou..after listening to you at the end, budget and all. I'm am in a similar situation, I'm a carpenter, but pretty handy around most things. You give me the confidence and filled in the gaps for me. I had a temporary hooked up with pressure tank sitting beside well ($1500)..with a hose running to RV while I rebuild house after fire. But here in South eastern Ontario, the freeze is coming. So not only the 1000's Ill save, but the availability of a contractor to do what I need here...thankyou you thankyou!

I found you video today and it was very interesting and you seem like very nice people. I may have discovered an error in your installation. At or around the 19 minute mark the gentleman decided to use brass instead of galvanized for the adapter. Brass, with a greater electronegativity will at as a cathode and steal electrons from the zink, as it is the the less noble metal. Once the zink is removed the the iron underneath will begin to corrode. This will go unnoticed at first. The first sign will be the pump cycling more often, this will happen due to a hole developing in the galvanized reducer or the one inch nipple at the pump. As the hole gets larger the pump will not shutoff. I would urge you to pull the pump and replace the fittings with either brass or galvanized and not mix dis-similar metals. Only my opinion and you can research this yourself, galvanic corrosion. Best of luck, Shawn.

The video was very helpful to give an overview of how to install a well pump that uses a pitless adapter. One bit of advice I would give is to unroll the pipe by rolling the entire coil along the ground. That way it will not be a big spiral like that. Also, put a stick through the spool of wire and let it unroll as well. Don't pull it off of one end. Same thing with the rope. Unroll, don't pull off an end. That is why stuff gets kinks and coils you don't want.

His dad got you a subscriber. Very well described and the information was correct.

Thanks so much for taking the time to capture the install on video! This was a huge help to me.

I installed wells and pumps for many years. I hope you used black electrical tape to secure the wire to the poly pipe as you dropped it down the well. It should be taped about every 5 feet at the pump end for at least the first 100 feet. Then tape about every 10 to 20 feet thereafter. If you didn't the torque from the pump starting will whip the wire against the wall of the well causing a short circuit over time and you will have to pull the pump and replace the wire. Also you do NOT want to use a straight piece of pipe to attach to the pitless adapter but make a "T" handle so that if it ever slips as you go to remove the pump it will not fall in the well. Many of my service calls were pumps put in by inexperienced installers who did not tape the wire properly to the poly pipe. You want to use Scotch Super 88 tape. I saw you using zip ties and would not recommend those because those can cut into the wire from torque. A 3/4 horse pump has a tremendous amount of torque starting.

We are going to be drilling a well soon on our property in Montana. I was really interested in the "Pittless Adapter". This avoids having the whole well infrastructure in a vault with electricity and pressure tank underground. So many issues with that configuration like leaks, potential gas, or electrocution going into a a vault underground. The Pittless Adapter makes it work safely so that there is no freeze of your well at the frost line. Then the pressure tank, electronics can be in a structure in the house or in a well house above ground that can be warm without freezing. Thanks for sharing this video. I feel much better understanding how this all works.

awesome job. thanks for posting, I'm learning a lot here. I'm planing on installing my own pump so this was the best video I could watch to see exact process.. God bless you guy, keep up the good work :).. can't wait to hear how you guys like that wood burning stove :)).. my wife was planing on getting same stove for our house.

Thank you for the great step by step information. I thought it was cool that you where using a PVC pipe to install your pitiless, I'm glad I watched more of the video as I will definitely use a steel pipe instead. :) That just reassured me that with a little elbow grease and determination, although not always perfect, we can all realize our goals and appreciate our efforts and success!

Lucky to have Dad help you out. Good job! Insulate any pipe you can, especially in your climate. 👍 Vinny 🇺🇸

your dad is a genius

Praise God! Huge accomplishment ... Now get to work

Thank you for just doing the running process, I've never seen how one of those things get put together. Wow, you are right, lots of technical knowledge and it was neat just listening to Scott's dad fill in the what's it and why. Thanks. Hope it does what it's supposed to do and you have trouble free water. Get that sucker backfilled before the snow gets in the trench :)

As a fellow lineman for 36 years, you’ve got a great father in law. As a few others have already said, tape the pump wires all the way up the well, use stainless pipe connectors. Maybe a check valve every 100feet in the pipe to take pressure off the one at the pump.

The 14 year old in me chuckled when things started sounding a little strange at 23:00. The 55 year old in me really appreciated the additional knowledge I gained from the vid

Glad it is working out for you in the long run. Up here in the valley we are already frosted over for days at a time so projects are slowly drastically.

Great video guys. I have learned a lot. Thanks again. Martin Roy from Québec, Canada. Cheers.

I had a similar situation with my well. We Kept drilling and at 240 feet we were producing 3 GPM. Went another 100 feet and still 3 GPM. We called it at that point and decided to live with it. Like you we have about 400 gallons in the static column. Initially before we inhabited the house, I ran a hose wide open until we dried the well. Did it a couple of times. It took over an hour to dry it. According to the engineering tables I found we were flowing 1000 GPH so ultimately I think production improved. Still wouldn't want to have to put a fire out or water a lawn but it's been good for 2 years. We did install a variable speed pump so our water pressure is constant.

What a great video . Your father-law is a very smart man . Thanks

Well done. You see what I did there? LOL I was fussing at the screen when y'all's dad started with the Teflon tape, and so relieved when he corrected it. Yeah, a steel or iron pipe would have save you guys probably an hour on getting that fittless together, maybe more. (It's hard to tell for sure with the editing.) Glad you guys got water. That is maybe the most important find on any homestead. Although, with the precipitation you guys get you would have likely been just fine collecting rain water and running it through a filter (if the filter would even be necessary up there). Great update, thanks.

Really enjoyed this vid. Scotts dad seems amazing.

glad your well is up and running. i did learn something about how they put the line in to the house thank you. stay safe.

This was SO fascinating. Thank you for sharing!

Good job guys

Thank you for making this very helpful video. Question. I saw you put the jaws in the plumbing crimper, but didn't see you use it.

We finally put our wire in polly tubing as we would get rubbing off our casing wearing through in random spots and shorting to the casing. The pump does a little twist every time it starts and that can be a problem. After pulling it up the 5 times in 20 years it has initially, we haven't had an issue in the last 15.

Amazing video, anyway you can tell me what the name of that flexible pipe you used to connect the water line and pitiless adapter? I need one and can't find it anywhere. Thanks so much!

why even use galvanized down in the well,? go brass or stainless all the way

A wealth of information. Wow

Nice progress

What size/model pump and capacitor was used? I couldn't tell... we have to put our pump at about the same depth. I was planning on using a 1 HP franklin.

Good job guys, looking good

You have LOTS of precipitation (rain and snow) that can be used for water if you spend a few thousand in holding tanks and processing equipment.

Very interesting installation.

Glad you got that done before the freeze! I love watching old timers work due to the many years of experience. I know they were probably all you had, but I hate seeing the galvanized fittings you used on the pump. It's not worth using them...especially at the bottom of your well. When installing your plumbing in the house, invest in brass or cooper fittings only, it's better in the long run. Keep up the good work!

that is the wrong way to undo piping or wiring that is on a spool.. u want to undo it like thread coming off of a spool. that way it will not end up all coiled up.

Well water is the best way to go

Why did they blast it at 200?

It's allot easier just to use 1 1/4" threaded pvc that is what's supposed to be used but whatever works right lol. I work with water wells for a living tho good video

Great video

Everything looks good!! I do have a question on the pitless. What was the reasoning for the 10 foot bury? I service wells and well pumps in MD, and typical pitless depth is 3-5 foot. Great video!!

Great Progress

Perfect video. Ty

Hi I like you truly video.question how you get the hose.where did you buy it.thanks.

Would you mind saying the price of that 3/4 hp Gould’s pump? I think mine is going bad, thanks

What kind of pipe was that, 200 psi Interstate. And where did you purchase it from?

Would have been a lot easier if you put the pitless adapter on the line and lowerd the whole system down together.

Hol hol hold on good people. You said something very interesting at 1:03 about them blasting the well. How is this done exactly and what did they use? Asking because i have a low yield well that i believe needs just that.

drop a penny it falls 20 feet per second that is an easy way to check your pumping level

What size tubing

I was going to comment at the end that Dad was putting the tape on backwards but he caught it ::I

Way, way, WAY too much Teflon tape on those joints. Two rounds ...max. BTW.....The military did NOT invent Teflon...nor was it for NASA. It was "invented" by accident by DuPont, who was trying to develop refrigerant alternatives.. Lab tech accidentally left a valve open on a TFE cyclinder.....accidentally resulting in the Teflon discovery.

Very interesting

Hopefully the child got those roasted hotdogs?

Should have soldered those electrical connections after crimping them.

He was an electrician in the air force for 30 yrs. & strips wire with a pocket knife

Quick Tip...If you are looking down the well on a sunny day..use a mirror, brighter than any flashlight...

EARTHQUAKE PROOF AND VOLCANO PROOF ??

Teflon didn't came out from space program rather accidental invention by Dupont in early 30s.

You just put the Teflon tape on backwards.

I made it with Avasva solutions.

Sort of helpful but too much is missing. Next time remember that the videographer should never act as a participant.