Thank you for the huge compliment. Slowly getting some more viewers, and I'm happy I can help anyone. Take care

@@XCPainter Can i paint and primer over old paint for only trim or would you recommend sanding down the trim first?

@@vgemini9474 if you can detect any cracks in the paint or wood, flaking, peeling or hints of wood decay under the paint.... remove it and sand wood to fresh wood. If it looks sound you can prime or paint away

Thanks a lot! It was a cool paint scheme. ☺

Thanks man!

It's best to give the paint a day to dry/cure and beyond that you can either wrap it with a clean rag (but it can leave marks possibly), or use blue tape over the ladder mitts to possibly help.

Check out my Instagram page to see the Victorian home I've been working on. Cracks get prepped out with filler or epoxy fillers on this project. I'm a big proponent of sanding for adhesion and removing paint to fresh wood as needed.

@@XCPainter KZfaq works well for me. I don't IG, bummer.

Sorry I didn't see this comment earlier. In order to not splatter paint, you just have to either get excess paint off of roller before applying or have to roll a little slower I think. When you paint the bottom edge there shouldn't be a lot of paint on the roller cover

Thank you very much

Thank you 🙂

k m I have some basic footage of doing wood railings but haven't made it into a video. You can use the 4" mini roller to apply paint on the average picket/rails/posts. For higher end when you need a brushed look then use a brush with nice strokes. Spraying is always an option but you might need to hold a drop cloth as a backdrop.

Thank You much

Yes, we scraped, sanded, caulked but i can't remember if my boss spot primed but he might have.

Sorry for late response, but you'll want to use a solid body stain for the deck instead of paint. Products: Either Proluxe Rubbol Solid, or Arborcoat both from Benjamin Moore, or Super Deck from sherwin Williams.

Thanks the bucket hook was purchased from local paint store.

Sorry for late response. If the time is slick and/or glossy, sanding helps a whole lot for adhesion and coverage. If the wood trim is rough, shouldn't need to sand. Never hurts to give it a quick scuff though

We only had to spot prime some areas of trim. Dry time between coats in the summer here: 2 hours is plenty of time. More time is needed on cold or humid/cold days.

I love block brushes too. A 3" Pro Extra Swan has always got the job done very well. Of course, I'm trying/using different brushes as time goes on, and just have more options when I have them on hand. I've used quite a few different brands that are great brushes in either form, flat or angled.

Thanks for asking, mainly because the mini roller can be pushed into corners and paint effectively in many areas. Also just its easy to handle and have in the cut bucket.

Thanks man!!

@@XCPainter your welcome!

Benjamin Moore Mooregard low lustre, I think. It's a great paint.

Hi there. It does take a couple ladder sets unless you have a long reach and can do so safely. There's a couple options depending on the situation... ladder above the window, or set below the window... or for wide windows, 1 ladder set on the right, and then on left of window.

Thank you very much

Make the cars at least 100 feet away or more to be safe with waterborne paints.

@@XCPainter thankyou for answer!!

I don't have any videos about reaching high facias, though there is a brush with a bendable handle called the "Gooseneck" by Richard tools, that can attach to an extension pole. It may be hard to paint long stretches with the pole though.

XC Painter ok thx

I believe that was Benjamin Moore Mooreglow soft gloss

Thank you sir

Depends on how weathered... a little dry, sun decayed can be fixed up by sanding and recoating (priming/painting). Of course if the wood is really cracked up, soft or rotting then it's best to replace.

Thanks for asking, we use 100% acrylic caulking, Miller Paint (brand) 50 year, or their Speed Dry version. There are several other good brand options.

Awesome! I commented on your vid at the exact same time. Or maybe you did right after me, anyways, cool!

Great minds lol

Hi, we started this job off by pressure washing the home, letting dry for a day or two, then prepping where needed, scraping/sanding, setting nails/adding screws, caulking and oil spot priming.

@Volkan Fresh Start 046 oil base primer from Benjamin Moore is real good. I often add penetrol to it for workability and pentration into the substrate.

Hi there are a few rare instances where window trim can be done first... but it's rare. Usually we would paint the "body" of the house 1st...

I would say it's less common to have flat trim paint... Some new construction builders might spec flat for trim, but I'd say low sheen or satin is much more common in a repaint situation

I use a 3m masking machine with 9" or 12" masking paper and blue tape, applying the tape at the bottom of the gutter and wrapping paper up and over. 👍

Thanks a lot. Doing videos can be a good outlet, but as well it can take a little time. It's a positive thing in the long run. For 3 years now I have been deducting hours from my paycheck so my employers and/or clients aren't paying more. I also like to keep working if chatting with someone which is good and bad at times too.

Works great for holding a paint shield too , when spraying high !

@@DEK981967 oh my, a two fer!

Thank you for your support!

k m There's a few variables on whether to paint the sides or not. First is customer preference, but also depends on the siding materials or how nice the caulking looks on the siding/trim joints. A home that has stained Cedar shakes may look nicer with the sides of the trim painted white, however Hardiplank sided homes usually look sharper with the (trim) face painted.

Thanks...I have cedar siding with a similar window trim...I will need to think about that one!

k m Painting the sides of the trim is often called French cut. Mini homes don't have French cut trim because it can highlight the inconsistent edges. If you have a craftsman style home with really clean caulking lines it can look okay. It does take a long time to do though.

FYI I finished painting my cape cod style cedar/redwood sided home ...I had about 6 window treatments like the one you are painting. I used your technique...I sprayed the sides, and only rolled/brushed the face. Mostly because what u said about the caulking...it would have been hard to get really clean lines. I really like the look. Its cool and it also looks neat...The previous paint job did not do it that way, which is why I never considered it I guess. Did not know there was another option. Glad I found your video..thanks again.

One more thing...never let your wife choose the paint color for the trim...ever heard of "otter tail"?...Kinda looks like diarrhea :>)

Benjamin Moore Mooreguard is really good paint in regards to longevity

You can definitely wash out your roller covers for next use (with waterborne products). If you plan on using a roller cover the next day, or a couple days, you can also wrap the roller in a little painters plastic and it'll stay good for a long time.

@@XCPainter omg you da man thank you so much for your reply and advice.

Thanks, I can see if we can find that color, siding right? or trim?

Same here, what color is the siding color?

Hi there, I don't recall the color names on this one. I would have to check into it with my boss at that time. They were Benjamin Moore colors I believe.

Quality primer 1st, then any quality exterior paint.

Hi. Sorry I'm not sure of this color name and don't have access to it really.

k m Exactly, spraying the fascias is rarely done since you don't want to overspray the roof tabs or your new siding or soffit paint, plus most fascias are rough textured and you need to brush it in anyways

I usually paint the siding then trim, but it can be flipped around in some instances.

@@XCPainter thanks

Good question. What would you guess?

@@XCPainter if I had to say I'd guess 100lf per MH/1 coat

Terry Dickens My boss and I on this one.

I don't know the exact price for this one, (I am not the company owner), but if I said a number most people would question why it costs what it costs, despite the fact they don't see the whole job or the full scope of work. Some people would say they could do this job in a day... anyways it took 2 guys 5 days. Two coats on everything including gutters and downspouts.

House was washed with cleaner and power washer. Fascias are scraped, caulked and spot primed. The caulking is the almond color you can see it in places.

If the fascia is in great condition but want to just change the color, do they still need to be scraped?

And what kind of cleaner?

@@relissanight No scraping necessary if the existing paint is holding well and in good condition. Sanding (quick scuff) is an optional step that will improve adhesion.

Why do you ask that?

@XC Painter Because looks like a good size house, I can spray it in less than a day...2 coats.... I get painters here In California that always want a bunch of money but theyre really really slow...can't even spray a 2800sq ft. In a 8 hour day

Plus your starting trim yet you have all the drop clothes down even tho the house is all sprayed out l.. Here we always pull all the drops after its sprayed out.. Your reasoning is probably because you still have to trim but when we get done spraying we pick up all the drops because it makes for a cleaner job, looks more organized for the customer... I would NEVER leave drops down over night....We are all about customer service so...and then when we trim we just carry one runner under us if it's over concrete, tike, etc.

@@nothingsimpostleble1593 okay thanks for clarifying. 2 coats, one day. I masked everything ahead, (more than just windows and foundation) while my boss sprayed it out twice. He did the prep work for a few days prior to that while I was on another jobsite. Job had a few colors, accent gables in front, and everything was washed, prepped, spot primed and double coated. We were there 5 days including finishing the front door, which I did twice because the color was mixed slightly off. Side note, of course we want to do the work as quickly, effectively, and efficiently as possible. The job is estimated and invoiced based on job scope, client's expectations, and we do our best to make sure the job is a success for everyone.

@@nothingsimpostleble1593 Trex decking, stairs, hot tubs right under the beams and fascia, railings, fences, sidewalks, and on the side it had artificial turf, so yes it stays covered until it's time to uncover which is as fast as possible

Paint? This is Benjamin Moore Mooregard

@@XCPainter thank you so much

@@alex.g9637You're welcome, take care.

Alright thanks for your feedback. Many times, I mention that info right away, and sometimes that info is not the key topic of the video so I mention it as possible and appropriate.

Alex Campana okay thanks I'll try to improve that. I have a cheap lavalier mic but haven't utilized it yet and I've tried voice over and it doesn't sound natural so far.

XC Painter good luck, and thanks for the informative videos!

Good catch, next video...

We do not trim out the back side of the fascia by brush. We spray that area. The angle at which I am painting would be an appropriately tough position (up on the ladder) for anyone watching that learning to paint.

Respectfully, not every house or job is the same... build style, quality, and scope of work desired are just a few variables. Many houses that I paint, do get the edges trimmed out. It's called French Cut. The biggest variables are what dimension and quality of trim materials, and what type of siding. Hardiplank, very extremely rarely gets French cut trim because the trim boards are usually thinner dimensions, and the caulking job that seals Hardiplank to trim is less than ideal to create nice lines. Impossible most cases. I just worked on a Victorian style home for 4 months this year which rightfully so deserved to have trim everywhere French cut, including edges of soffit, bellybands, window casing, cornerboards, and more. A large home I painted last year had a combination of siding materials and it also was French cut due to the build quality and scale of everything.

@@XCPainter This house you are painting that we are talking about isn't an example not to French Cut. Plenty of edge exposed to paint. You took easy and fast way. Shorted the customer. Spin it all you want. I guarantee if you told owner about it and offered both ways, he would say French Cut. Looks soo much better and complete.

@@crackerman3 absolutely disagree with that 100%. Every house is not a work of art. This was a very nice house but not styled to be French cut. It's a contemporary look which looks sharp actually Btw I was not the contractor in charge here but an employee. So.. not taking the easy way out. It's the smart and reasonable way to do it though. House is refreshed and protected, new colors and looking sharp.

@@XCPainter I'm not ripping on your work. Looks like you do good work, but to say the house isn't styled to be French Cut is a weak argument. You painted the trim a different color than the body of house to add an accent color. I'm just saying, if you paint the trim a different color, paint the trim, the whole trim that color. Also, if you weren't the lead on the house, then it wasn't your call. You were following orders. Then he took the fast easy way out. That being said, I guarantee if the homeowner was shown an example of both painting the whole trim or just the face he would say French Cut. Also if you weren't the lead, then maybe you should start your own company. Looks like you are more then skilled. Make the big bucks and own decisions. Merry Christmas

@@crackerman3 thanks, Merry Christmas to you as well. Started my company this Fall and am currently on the 1st project. In this video, I show a close up the windows trim on the left after I rolled it.. you can clearly see how unsightly the caulking transition to trim is. That would be highlighted. Anyways, take care

Because the trim texture is very rough and porous. Also allows for good and even coverage, fast. I would use a brush if it's faster or it requires a brushed finish. That's why.