How and When to Change your Inline Skate Wheels // Rollerblading Tips

Рет қаралды 61,841

Күн бұрын

The wheels on your skates are similar to the wheels on a car. Eventually you’ll need to replace them. I’m going to show you how to tell when your wheels need to be replaced, which wheels you should replace them with, and how to get more life out of your wheels.
Wheels I Recommend: amzn.to/3KkMvc2
0:00 Intro
0:47 How to Rotate Your Wheels
1:13 When to Change Your Wheels
1:42 How to Set Up New Wheels
3:02 Wrap Up
* More Back to Blading *
Website: BackToBlading.com
Slack: BackToBlading.com/Slack
Facebook: / backtoblading
Instagram: / backtoblading
Patreon: / backtoblading
Note: We are a participant in an affiliate advertising program designed to provide a means for us to earn fees by linking to affiliated sites. Lawrence is one of the owners of 50/50, Compass and Chroma and while he tries to be unbiased and avoids conflicts of interest, it’s important to disclose.

Пікірлер: 111

@JustinThursday 3 жыл бұрын

Perfect. Exactly how tutorials should be. Quick and to the point.

@JustinThursday 2 жыл бұрын

@@someblindguy lol what

@JustinThursday 2 жыл бұрын

@@someblindguy Ahh I couldn’t see those comments before. Lol.

@francesco5254 3 жыл бұрын

Finally someone in the skating world with good communication skills. Well done

@Locreai 3 жыл бұрын

i skate very hard wheels, and rotate often. I've found that a set of wheels can last a couple full years if you really fuss over the wheel for your skating style and rotate often. that said I have another tip for people who DO rotate a lot and it is LOCKTIGHT

@d_a_hizzle1309 3 жыл бұрын

For sure Locktight is particularly important for frame bolts. They're out of sight, out of mind, but you really don't want them falling out

@_lc 9 ай бұрын

I go through a set in 2 months! 😅 40km a week, going to 140km on the holidays.

@yoomoron 8 күн бұрын

@Locreai Tell me don't skate much without telling me. I use 3 sets in a year. If you skate once a year a set will last you a life time.

@SerialWheeler 3 жыл бұрын

Really like this new format. Great advice!

@ThirtyandRollin 3 жыл бұрын

Great vid law! Always killin it!

@whi2gan 2 жыл бұрын

Thank u sooo much!! This video is short & to-the-point-yet very jam-packed with blade knowledge!!🤯🤯 Although I had to learn the majority of blade terminology alone{before finding your video}, it was still super reassuring to affirm my freshly self-taught knowledge, alongside professional/industry-standard/even just general knowledge!! No idea why rollerBLADING, in particular, went so out of style, but all info & resources attached to it seem super hard to come by, so THANK YOU!!🙏

@MattMc55 3 жыл бұрын

The 65mm 90a wheels I just got from 50/50 are like riding on clouds. Thanks for the recommendations. Thought I needed a harder wheel but the bigger wheel feels right.

@gcram333 Жыл бұрын

Not only was this helpful and easy to understand but I have those exact skates . Thanks for info brother !

@MatejVancoCG 3 жыл бұрын

Absolutely great! Straight forward, well described. Thanks!

@chilli-iceolive-abode2447 3 жыл бұрын

It's also interesting seeing how you insert your bearings. I've always used my hands unless they're super tough.

@BacktoBlading 3 жыл бұрын

I have a tool, but this method works really well for all sizes

@greg6162 3 жыл бұрын

@@BacktoBlading I just got macroblade 80’s and was thinking of getting a set in case to have on hand. I only got the two 4mm hex wrenches. I was thinking of getting Hydrogen’s for when my skill gets better and I want to cruise the rec path a little faster. Should I upgrade my SG5 bearings to SG7 or something else maybe?

@kaaws Ай бұрын

this is a PERFECT tutorial man love this video hope you can to more videos like this

@OnnoKaell 3 жыл бұрын

Awesome Tutorial!

@meganbasurto2869 Жыл бұрын

Very helpful and pretty straight-forward. Thanks a lot!!

@samiabrahimi3410 Жыл бұрын

Thank you so much that was very helpful

@asmaabouaamri6241 Жыл бұрын

very useful for me as a beginner skater, thank you very much

@aBudSmoker22 3 жыл бұрын

thank you for this video Law! need to snag some Back to Blading merch to add to my shirt collection!

@BacktoBlading 3 жыл бұрын

More coming soon!

@MaxMining 2 жыл бұрын

loved this tutorial, helped alot, i just wanted to add that i used a hammer and allen key to pop out my bearings from the wheel

@BacktoBlading 2 жыл бұрын

That can work, just be careful you don’t wack something with that hammer.

@disastergs 3 жыл бұрын

can you make one about getting bearings in/out of metal core wheels? Love the channel.

@Comingsafra 3 жыл бұрын

Thanks sir am thinking of changing my wheels too.. thank you

@michaeljarmstrongjr5569 2 жыл бұрын

Gratitude 🙏

@Sam-gf1eb 2 ай бұрын

One way to lengthen the life of your wheels is by using a different stopping method. The T method and push stop will damage the side of your wheels more than a spin, step, or heel brake will. If you use the T method and push shot regularly, make sure to rotate the wheels regularly. With the T or push stop, you grind one side of the wheel, so rotating the wheel makes it so that grind both sides at a relatively equal rate.

@jakobhoult1188 3 жыл бұрын

Great video! Can you do one about bearing cleaning? I'm curious to know what others use for that process.

@BacktoBlading 3 жыл бұрын

It’s in the queue for next week

@MrNicknayme 3 жыл бұрын

@Back to Blading and bearing abec ratings etc. Me, I clean once, then buy new. Bones.

@diridavy6385 3 жыл бұрын

Just the way a tutorial should be🤙

@ethan6273 2 жыл бұрын

Wow, no dislikes, that is actually impressive

@johnnielewis9896 Жыл бұрын

great information...would you advise buying precision wheels for rink skating?

@chilli-iceolive-abode2447 3 жыл бұрын

It pains me to see wheels worn so unevenly on one side! I've always switched my wheels round after every couple of sessions and I find I can wear them down evenly.

@Kiarabelle1 Жыл бұрын

Excellent tutorial. Having a twin cam bearings with nylon retainer and metal shield, does it matter which side of bearing goes inside wheel(facing spacer)? Thank you

@BacktoBlading Жыл бұрын

You’ll want the metal shield on the outside, that will keep they clean for much longer.

@Kiarabelle1 Жыл бұрын

@@BacktoBlading Thank you kindly sir.

@thomasfeathers 3 жыл бұрын

Amazing video. Thank you!

@jeanluno2521 Жыл бұрын

Great Video ! 2 questions : 1) Are bearings always the same diameter ? 2) Why are there different wheels diameter ? I have 74mm spare wheels from previous rollerblades. My GF rollerblades have 76mm diameter ones and since I need to buy new roller blades, the shop sells them with 80mm diameter ones...Can I just repace the 80mm by 74mm once they are worn out ? Tks !

@HelloThere-ez6rb 6 ай бұрын

All skate bearings (skateboard, blades, etc.) Are the same. Bearing sizes can change dealing with other types of equipment though, not skate related. The wheel sizes differences in mm are depending on your frame size. You generally and usually want to keep the same wheel size your skates came with. It usually says MAX wheel size on the wheel frames on your skates. Ride safe. John ch. 3 and ch. 14 Matthew ch. 10, ch. 24 Revelation ch. 13-14, ch. 19-20 2 Peter ch. 2 Acts ch. 4 Psalms ch. 91, ch. 37 Holy Bible

@ninjaah1404 Жыл бұрын

I learned some new tips from this video thank you

@ukgamechanger 26 күн бұрын

Can you recommend what wheels I need for inline outdoor skating. I bought a set of hyper formance g+ 80mm 85A pared with bones racing bearings. I dunno they just don't roll that far I feel like I'm stuck in glue. Would you recommend me changing the wheels for something like rollerblades hydro's or is there something else you could suggest?

@gjslot123 3 жыл бұрын

Great stuff ! Qeustion, i struggle with ledge grinding with my usd sway skates (flat) should i switch to antirocker? Rails are fine... or should i keep practicing with flat? And if i need to go antirocker should i replace the 2 mid wheels or buy a whole new frame? Regards!

@BacktoBlading 3 жыл бұрын

Which frames are you on? The Fluid V that come with your Sway aren’t great for antirocker, but you can find some Fluid IV and they’ll be amazing

@gjslot123 3 жыл бұрын

@@BacktoBlading see picture url below, thats the one i have, i think the middle part is indeed not allowing me to go antirocker. Where to buy the fluid IV frame? And what antirocker wheels you suggest? Sorry for all the qeustions mate :) www.plutosport.nl/media/catalog/product/cache/image/680x460/040ec09b1e35df139433887a97daa66f/U/S/USD_Sway_Team_IV_Skates_Senior_8.jpg

@ryanhorton9594 6 ай бұрын

Changing my 110mm 85a for the first time in a year. Theyre honestly fine and hold up really well, but might as well chnage em out for 2024. Do new bearrings come with spacers?

@BacktoBlading 6 ай бұрын

Sometimes, but you should be able to reuse the spacers. Some wheels require specific spacers and those should come with them.

@Philbernard 2 жыл бұрын

Nice video. But what about the bearings? How do i know if i need to change them? Or do i ever need to change them? What should i be looking for when i change my wheels for new ones?

@BacktoBlading 2 жыл бұрын

Funny enough, I have a video on that. kzfaq.info/get/bejne/nNpyd9Ocrsuml4E.html

@NoBuddyz 26 күн бұрын

My urethane antis don’t spin. Had to dremel my ST frame. 92a wear fast on my streets too! Will 50/50 frame and wheels solve this for me?

@MrNicknayme 3 жыл бұрын

What if you are on Oysi frames, how would you then rotate the wheels? And frame sizes! Please do an explainer about that. All UFS frames fits all UFS skates, but what do you get if yo go large, or if you go small? And what is the “most ideal” size per mondo size?

@BacktoBlading 3 жыл бұрын

That’s a great question. I would treat them as a double antirocker frame. So rotate and flip the outside wheels then rotate and flip the inside wheels. More videos to come, frame length and sizing definitely are on the list!

@kenmastersmaster 2 жыл бұрын

You seem to be the expert here..I bought some twister 110mm and noticed one of the wheels has a feta cheese like texture on the back wheel.. Given the skates were 6 months old even I bought them I figured it had something to do with hydrogen wheels consistency but now an wondering if the wheel is defective or dry rotting. The other wheels seem fine with maybe very slight bumps in them and a more smooth texture. The wheels only look to be worn maybe 2 or 3mm, so they still have a lot of life and I don't want to spend $75 on new wheels

@BacktoBlading 2 жыл бұрын

Yeah, it sounds like that wheel is just wearing faster than the others. Are usually find the last wheel takes more abuse. Could try rotating them to get a little more life, but those stock wheels aren’t going to last forever.

@fernieu3537 Жыл бұрын

i got the black with red lining exo 4 wheel blades and today my right side back wheel busted allllll up and the third one is soon to bust. i was wondering if u know any good wheels i got the K2 78mm80a or if i should just buy new blades.. ? i want to go faster as i travel long distances after working out . what would you recommend ? im not looking to buy the 110mm maybe 90mm as i said i would like to go faster but dont know if the wheels would bump or even fit together . please help

@fernieu3537 Жыл бұрын

both wheels on my skates are not symmmetrical lmao

@giftedsaucer631 Жыл бұрын

Me all new to this simply searching how yo change the wheels learning that cleaning other things is needed to which makes sense but like how tf do you effectively clean the bairings so they spin nice?

@invincibleEAST1 2 жыл бұрын

When replacing the wheels and bearings can I choose a different brand or does it have to be brand that it came with it

@BacktoBlading 2 жыл бұрын

You can use any brand you like! Most important is the right size for your skates

@invincibleEAST1 2 жыл бұрын

@@BacktoBlading thanks my friend

@woodkellyvictor8906 11 ай бұрын

can you please tell me what if i only brought the skates not the wheel because it did not come with the wheel then how do i tell what size do i need

@stvlu733 3 жыл бұрын

What about swapping the left with the right side wheels and then swapping them front to back? Will that make them last longer since they wear out one side mostly?

@BacktoBlading 3 жыл бұрын

Absolutely! I’ll have a video on rotating wheels in a few weeks.

@stvlu733 3 жыл бұрын

@@BacktoBlading My main question is what range of wheel numbers are softer to harder? I'm looking for a set that is road worthy when riding on rough surfaces like the street for a good period of time? I want a cushy ride like riding on a cloud but still want some good glide and don't want to be too fast but fast enough so I don't get tired quickly. What is a good bearing number and wheel hardness balance for this?

@HelloThere-ez6rb 6 ай бұрын

@@stvlu733Try 82a or 84a bearings bones reds or rollerbones

@HelloThere-ez6rb 6 ай бұрын

@@stvlu733Try 82a or 84a bearings bones reds or rollerbones. Try 80mm skates, that's a good general wheel mm size

@TheArmoredSquiral 3 жыл бұрын

wats the rack behind you and do you have a link for where I could perches it?

@BacktoBlading 3 жыл бұрын

I made them out of a 4x8 sheet of 1/2” mdf and some 1” dowels

@J4rn0 Жыл бұрын

My wheels lock up when i tighten the axel. Not sure if this is normal or if my frame is just bad...

@derekdauzat 2 жыл бұрын

will s9g fit 84mm wheel? also would 80 or 84mm fit on maxxun 90 skates?

@BacktoBlading 2 жыл бұрын

I don’t know about the s9g, but you can always ride slightly smaller wheels on a skate. Just don’t go to small from the “max size” otherwise you might scrape on the frame walls

@mlee6050 Жыл бұрын

Confused on how said rotate wheels as is it fine on same foot? Seen some swap what skate they on too

@BacktoBlading Жыл бұрын

Most people push harder with one foot than the other, and turn more one way than the other. So most people wear down their wheels on one side. Rotation from skate to skate helps keep the wear uniform

@mlee6050 Жыл бұрын

@@BacktoBlading okay thanks, makes sense like I know in cycling often 52%/48% on balance of how people cycle when power down between each side

@brianmboya6590 2 жыл бұрын

Hello - my daughter's front skate wheel came off. I have the tyre and the small metal rod-like piece that sits in the middle of the tyre. Am not sure how to return it into the socket and I have no tools - please guide me on how to go about fixing this.

@BacktoBlading 2 жыл бұрын

Tough to help over KZfaq, but I will assume that’s the axle (rod) and the wheel (tyre). You should have a third piece that is threaded and screws into the axle. That keeps the wheel in the chassis

@brianmboya6590 2 жыл бұрын

@@BacktoBlading Yes correct. I have the rod and the wheel. I will look for the 3rd piece that is threaded and try screw it back in the rod, to secure the wheel. If its misplaced, I will try and purchase one locally to replace. I will definitely update you on the final result. Thank you so much for your prompt reply and help. Really appreciate 🙏🙏

@menacingsprite Жыл бұрын

My niece has some new blades and the wheels don’t spin that well and when I took one of the wheels off it had this plastic thing over the bearings. Is this why her wheels won’t spin?

@BacktoBlading Жыл бұрын

Usually the plastic piece is a spacer to allow for smaller axles. Which skates are they?

@jaynhsob3935 2 жыл бұрын

How many bearings would I have to buy for for 8 wheels and how many spacers and what size please ?

@BacktoBlading 2 жыл бұрын

Each wheel needs 2x bearings and one spacer. They’re usually 608 bearings (that’s the size) and 8mm spacers.

@jaynhsob3935 2 жыл бұрын

@@BacktoBlading ok thanks

@shakeebahmed7535 3 жыл бұрын

'wheels come in all shapes and sizes.' so can i get triangle shaped wheels?

@developer-juice-Khailenno 9 ай бұрын

How do I know if the bearings will fit in next wheel

@BacktoBlading 9 ай бұрын

It’s a standard size for all wheels

@giftedsaucer631 Жыл бұрын

How to clean the baring well??

@sweetpeaparaan1033 2 жыл бұрын

are Fothon wheels ok to be used with Micro MT4?

@BacktoBlading 2 жыл бұрын

Probably, if they’re the right size

@whoisdavedotcom 3 жыл бұрын

I have legit been doing bearings wrong my whole skating career. Not no more though thanks Law

@BacktoBlading 3 жыл бұрын

Oh no! Glad I could help. Let’s say you had a friend who did it wrong. How were they doing it?

@whoisdavedotcom 3 жыл бұрын

@@BacktoBlading he was jamming the axle up on the bearing and hitting it with an implement to break the first bearing out hoping it didn't slip and dent the case for the balls. Then putting them back together its was a 50/50 chance the spacer would stay where it had to

@BacktoBlading 3 жыл бұрын

Yeah, some tools will help with this but sometimes it can end poorly. There are bearing extractors on some presses which work flawlessly, but too detailed for this video.

@whoisdavedotcom 3 жыл бұрын

@@BacktoBlading no need for tools now you have taught him the secret tricks of the trade

@laurenfrija 2 жыл бұрын

I swapped my wheels but they feel uneven and I noticed front wheel doesn’t touch the ground. What could it be.

@BacktoBlading 2 жыл бұрын

Try swapping the front wheel to the middle and see if that fixes the issue. If not, your skate frame might have a slight rocker to it. That’s normal but maybe unexpected

@laurenfrija 2 жыл бұрын

@@BacktoBlading thanks ill Try that out

@rey-ke5ls 2 жыл бұрын

80 mm Wheels ...now 75 mm(good shape)...is it time to change ? How can far I go? Thsnk you

@GamerGrl90 2 жыл бұрын

Until the plastic

@amyx231 3 жыл бұрын

I have wheels and bearings...but cleaning my old wheels in rubbing alcohol and using silicone machine oil have fixed the old set... 🤷🏻‍♀️🤦🏻‍♂️ I have new wheels and nowhere to put them. Lol.

@Conchobhar 3 жыл бұрын

1:18 holy shit dude.

@crazykiddo3564 2 жыл бұрын

I'm kinda scared to change wheel. I might do it wrong and when I started to skate it might fall apart. Hahaha I'm stupid.

@crazykiddo3564 2 жыл бұрын

Help me btw. The wheel in front of my skate is not touching the ground. Why is it so and what should I do?

@BacktoBlading 2 жыл бұрын

Tough to help without seeing your skates. It sounds like you have a rockered frame which means the middle wheels touch before the outside wheels. This is popular for slalom and hockey and helps you turn faster. Do you think that’s the case?

@crazykiddo3564 2 жыл бұрын

@@BacktoBlading Yeah yeah yeah! The wheel in middle touches the ground first ( Specifically the 2nd wheel). While the first and last depends on where to I put my weight.

@crazykiddo3564 2 жыл бұрын

@@BacktoBlading One last thing sir. I'm really not into tech thing since it's my first time having Inline Skates. So, the first time I clean it, I cleaned them all together without removing the wheels and the bearings ( Cause I didn't know it's a thing. Hehe!) And sometimes, I stored it even if it's wet because of the rain. So now, It has a rust all over, also in the bearings and I can't take the wheel off. What should I do? Thanks for help!