How (and why) to ceramic coat your WHEELS!

Рет қаралды 7,653

Күн бұрын

This video is all about how to ceramic coat your wheels.
The ceramic coating we recommend? Our 8-year coating: bit.ly/8YearCERAMIC
Wait, you don't need a SPECIFIC coating for wheels? No...and in this video, Yvan explains why:)
Oh, and to prep the wheels...you'll want a few products as well:
IRON REMOVER: bit.ly/3GfY4iM
ALL CLEAN (diluted 15:1 if you have the concentrate, otherwise it comes pre-diluted at 15:1 in the bottle): bit.ly/AllCleanDIYDetail
WATER SPOT REMOVER: bit.ly/WaterSpotRemoverDIY
--
Podcast:bit.ly/DIYDetailPodcast
--
#autodetailing #diydetail #yvanlacroix #konigwheels #detailing #detalingtip #howtodetailacar #detailing101

Пікірлер: 101

@wutdadilyo 9 ай бұрын

Thank you for making these detailing 101 videos. Great job Yvan! Look forward to more of them!

@diydetailofficial 9 ай бұрын

Glad you like them!

@Mr.Jones1983 9 ай бұрын

I am so glad that I've found your YT ch!! I've been a follower of yours for many years now. I first got introduced to you through Pan and have been a fan and follower since!! Also wanted to wish you a huge congratulations on your product launch, I can't wait to get my hands on some if not all in the future. Happy detailing good sir!!

@diydetailofficial 9 ай бұрын

Thank you so much!

@ohboy2592 9 ай бұрын

Perfect timing. Getting ready to do this on a new car and hopefully I can use your 5 year ceramic coating that I just purchased.

@diydetailofficial 9 ай бұрын

Excellent.

@P4SDetails 9 ай бұрын

The tips are always appreciated my man.

@diydetailofficial 9 ай бұрын

Glad you like them!

@T-BoneTodd 9 ай бұрын

Great video guys!💯

@diydetailofficial 9 ай бұрын

Glad you enjoyed it!

@Tigerbergslim 9 ай бұрын

Great video, and on a side note, I spoke with customer service today, and it was the best customer service experience I have had in years !! I wish I had gotten her name. DIY is killing the game in all aspects. I'm learning so much from these vids.

@diydetailofficial 9 ай бұрын

You spoke with Amy, and yes she is exceptional.

@brianjohnston7344 9 ай бұрын

I have also spoken with her a few times and agree she is great!@@diydetailofficial

@excusem33 9 ай бұрын

Useful video. Thx :)

@diydetailofficial 9 ай бұрын

Glad it was helpful!

@videomaniac108 7 ай бұрын

This was very timely, as I'm getting ready to instal a new set of black clear-coated forged magnesium wheels on my car.

@diydetailofficial 7 ай бұрын

Enjoy!

@evanthomas1555 9 ай бұрын

Perfect just in time for getting some aftermarket wheels 😎

@diydetailofficial 9 ай бұрын

Excellent, what wheels did you get?

@evanthomas1555 9 ай бұрын

@@diydetailofficial ordering a set of Enkei wheels very soon 🫡

@derekbelton5932 9 ай бұрын

Between the music and yvans voice this felt like watching PBS 😁

@diydetailofficial 9 ай бұрын

Thank you. Being educational is the goal.

@thesamsquatch5224 9 ай бұрын

Excellent! The veloster just gets better and better! Do you coat over the balancing weights?

@diydetailofficial 9 ай бұрын

I coat every surfaces

@chrisbradley3224 9 ай бұрын

@@diydetailofficialDo you have any concerns about weights not sticking if you get new tires mounted within a year or two? Is stripping it mandatory?

@stevenv9224 9 ай бұрын

👍🏼👍🏼👍🏼👍🏼 great video Yvan keep it coming my always learning from you an Nick 💪🏼💪🏼

@diydetailofficial 9 ай бұрын

Thanks! Will do!

@kevind_53 9 ай бұрын

Coated wheels are a huge time saver and product saver. Most of the time rinsless or soap is the only thing that we need🚀

@diydetailofficial 9 ай бұрын

Correct!

@khimaniz 8 ай бұрын

After applying it doesn't look that different from before. It also was hard to apply as I have glossy black painted wheels, so I just waited 2 minutes minimum before leveling. I accidentally used a 300gsm towel for the first few until realizing then switched to my pearls. How can I ensure I did the right job?

@diydetailofficial 8 ай бұрын

If it looks good then your good.

@gtpwhite 9 ай бұрын

I would really like to see your metal coating, I have a set of wheels I would like to do but concerned about dullness after cleaning the polish off after and coating the wheels.

@diydetailofficial 9 ай бұрын

Here you go. kzfaq.info/get/bejne/obF7gst-1bybgZs.htmlsi=74whQT1uT0KISxHs

@gtpwhite 9 ай бұрын

Awesome I’ll take a look and probably get some!

@Hephaestusthejeep 9 ай бұрын

So how often would you recoat a wheel? I coated mine about a year ago and its still holding up it seems to me. I do occasionally use a topper but not every wash.

@diydetailofficial 9 ай бұрын

Only when you feel the need.

@btbd2785 5 ай бұрын

I have wheels that are PVD coated Do you recommend a regular ceramic.coating or ypur Metal coating. What's the difference between these 2 coatings?

@diydetailofficial 5 ай бұрын

Use the regular coatings. The metal coating is only for raw uncoated metals.

@AdamSparks-nw7zi 8 ай бұрын

Yvan if you coat the wheel and you have your wheels balanced and they have to put the wheel weights in a different place on the wheel how will they adhere to the wheel if it’s coated

@diydetailofficial 8 ай бұрын

By telling the technician, they will abrade where they need to put the weights.

@1stfrompuertorico568 9 ай бұрын

Ready as always

@diydetailofficial 9 ай бұрын

Thank you

@MyGuyKirby 9 ай бұрын

Very good point on future cleaning on coated wheels, just use car soap and clean frequently.

@diydetailofficial 9 ай бұрын

Right on

@Tamales888 9 ай бұрын

I live in Arizona so theres a ton of dirt and dust everywhere in the air and on the roads. With that in mind should i wait longer than the one hour after coating my car before i take it out of my garage or is the one hour still good?

@diydetailofficial 9 ай бұрын

One hour is sufficient.

@brianjohnston7344 9 ай бұрын

What about using the coating on painted calipers?

@diydetailofficial 9 ай бұрын

Yes, good application for a coating

@everettekupsche4038 Ай бұрын

So for example a 2008 I think it's aluminum original Ford mustang GT then I have to buy your metal coating to make it work?

@diydetailofficial Ай бұрын

No , if it’s painted use a regular coating, metal coating is only for raw metals

@NightmareChronicles77 9 ай бұрын

Hey off topic but will All Clean be good and effective for upholstery cleaning?

@diydetailofficial 9 ай бұрын

Yes, 30/1 dilution.

@WilsonSilverthorne 9 ай бұрын

So I just gotta ask. If you want wheel weights on before coating due to the possible difficulty adhering to the wheel then - year down the road when you balance them do you need to polish the coating off that portion of the barrel so the balancing is seem less? And then recoat. Inquiring minds wanna know. The rear tires on the mustang always have premature wear!😮

@diydetailofficial 9 ай бұрын

I’ve had a few mustangs, unfortunately they seem to deposit rubber on the lower rear fenders, it’s almost as if the tires go up in smoke. Advise your tire installer, they will work accordingly.

@WilsonSilverthorne 9 ай бұрын

@@diydetailofficial Good deal, thanks. I have the same issue especially right before I go get new tires put on.... I get a call by the EPA for polluting the air... I call it a a special air freshener!

@wessmith6558 5 ай бұрын

Can your coat ring be used on matte or satin finished wheels?

@diydetailofficial 5 ай бұрын

Yes

@antoniou5 9 ай бұрын

does the 3 year graphene work on calipers also?

@diydetailofficial 9 ай бұрын

Yes!

@erikaddy9734 9 ай бұрын

Nice wheels. I'm assuming you won't be driving those in much snow but just FYI those are good tires but despite the all season label they are terrible in winter. I have them on my wife's minivan summer wheels and has dedicated winter wheels and tires anyway, but I have driven them in snow in the shoulder seasons and it's not good, even considering they aren't winter tires.

@diydetailofficial 9 ай бұрын

Thank you, we have dedicated winter tires.

@erikaddy9734 9 ай бұрын

@@diydetailofficial, I figured a good Canadian would. 😁

@Widetaco13 9 ай бұрын

Does the 8 year ceramic coating go bad or harden in the bottle after being opened?

@diydetailofficial 9 ай бұрын

It will eventually

@franksolis2998 2 ай бұрын

Can you use this coating on new powder coated wheels

@franksolis2998 2 ай бұрын

Black satin

@diydetailofficial 2 ай бұрын

Yes

@DMCnME 9 ай бұрын

Will iron remover and panel prep strip existing SI02 spray sealants, so I have a clean rim to accept my 5 year coating?

@diydetailofficial 9 ай бұрын

No, neither will strip a good quality sealant.

@DMCnME 9 ай бұрын

@@diydetailofficial Thanks for the response. What would recommend I use to strip sealants off rims so I can put a new coating on them? All Clean?

@diydetailofficial 9 ай бұрын

@DMCnME some sealants will require polishing to properly remove them. DIY Detail All Clean diluted 15/1 may help.

@chrisbradley3224 9 ай бұрын

@@DMCnMEI’ve had luck hand polishing with a microfiber towel or 3 inch pad and hand hook-and-loop block. If your sealant is weakened by All Clean and time etc already then it should come off with a finishing or one step polish by hand.

@DMCnME 9 ай бұрын

@@chrisbradley3224 Applying the 5 year coating this weekend. I semi-recently applied a TW spray-on SI02 sealant. I plan to go through normal decon (APC pre-soak, iron remover, water spot remover) and then polish. Hoping that’s all enough to strip the sealant.

@Tigerbergslim 9 ай бұрын

Hey I know this is a little off topic but we need some DIY stickers !! I guarantee you they will sell like crazy !!

@diydetailofficial 9 ай бұрын

Great idea!!

@shannaerickson6148 9 ай бұрын

Is this at all feasible wheels-on? Or would this depend purely on arm contortion ability.

@diydetailofficial 9 ай бұрын

For the barrels, you should remove them.

@shannaerickson6148 9 ай бұрын

@@diydetailofficial Thanks, good to know. Just refinished my rims and want to put on a coating. Car is getting a lot of sprucing up lately! These vids help a lot for care and maintenance.

@iglopez63D 9 ай бұрын

Sharp-looking wheels Ivan. So I like to coat my Ford Roush Ranger and Matte Wheels. Will one bottle of 8-year coating and top it with one bottle of 3 years coating cover my truck?

@diydetailofficial 9 ай бұрын

Yes.

@iglopez63D 9 ай бұрын

Sold! I almost bought Diamond Body 36. Ty

@derekcox8090 9 ай бұрын

I’m fairly certain Ivan had a hand in the development of the Diamond body lineup

@iglopez63D 9 ай бұрын

@@derekcox8090 probably, I did apply Diamond 36 on my wife's new Subaru last year, body, glass, and wheels. So far holding well. The best part it takes me less than hours to wash the car with P&S Rinseless Wash. Easy to maintain.

@chrisbradley3224 9 ай бұрын

@@iglopez63DDodged a bullet. Has not seemed very impressive for most people…

@wademiyataki9221 9 ай бұрын

If you coat the barrels, do you need to worry about the weights sticking when you replace the tires and have the wheels rebalanced?

@diydetailofficial 9 ай бұрын

Yes, but if you warn the tire shop they can adjust accordingly.

@MC_Reds_Mark 9 ай бұрын

What will they do to adjust accordingly?

@MyGuyKirby 9 ай бұрын

As I guessed Yvan does it correctly to protect all those wheel surfaces, hope those wheels are on his tow car.

@diydetailofficial 9 ай бұрын

Yes it’s the car we tow behind the bus.

@TannerBobbitt 9 ай бұрын

1stfrompuertorico much be stopped!

@alfredautospa 9 ай бұрын

Humberto is also known as skynet. He is always online and he has become sentient and cannot be stopped 😂. Humberto, I hope you are well my friend! 🤜🤛.

@diydetailofficial 9 ай бұрын

lol

@clints8888 9 ай бұрын

i like a lot of diy detail products but when you say this helps keep the wheels in balance i’m guessing you would want that statement back. cheers

@Gabriel-zj2wk 9 ай бұрын

i think it was thought that thanks to the ceramic protection the wheel won't hold dirt, snow and thanks to that it will remain balanced

@diydetailofficial 9 ай бұрын

As someone who drives in the winter, a coated wheel definitely assists in the wheels staying balanced when driving in the snow.

@user-ut3lb5fd5c 9 ай бұрын

1st!!!!!

@diydetailofficial 9 ай бұрын

Thank you

@5338shawn 9 ай бұрын

I don't know why when I here Ivan, I feel as though he is always talking out of his ass!!

@diydetailofficial 9 ай бұрын

Take the time to listen without pre conceived opinion. Yvan has been pushing the envelope and thinking outside the box for decades. There are many things Detailers see as normal and mainstream, that 30, 20, 10 years ago he was told at the time that he was wrong. Yvan approches detailing as a business, and he is passionate about always learning, making detailing safer, more enjoyable, and more efficient.