How do we build our V10 Lamborghini and Audi R8 engines?

Рет қаралды 32,628

3 жыл бұрын

We're often asked about the rods and pistons we use in our V10 engine builds, so we thought we'd explain it all in a video. From a stock rebuild, to a fully built twin-turbo set up, we show you the components we use and the science behind the way we do it.
*Our state of the art Maha dyno cell is now available for bookings. Please call for prices*
REPerformance - the supercar tuners!
✅ Standalone engine management specialists Syvecs Ltd & MoTeC
✅ State of the art MAHA Dynamometers 4WD dyno facility
✅ Maintenance and tuning for R8, Lamborghini, Ferrari, McLaren
✅ Official Akrapovic Exhaust System dealers
-----------------------------
Check out our in-house partners Pro-Detail UK - specialists at PPF, ceramic coating, paint correction, automotive appearance and presentation
-----------------------------
📞 01793278069
📱 07786170031
📧 info@REPerformance.co.uk
🌎 www.reperformance.co.uk
➡️ @REPerformanceUK
➡️ @reperformance
-----------------------------

Пікірлер: 63

@jumpspace7414 2 жыл бұрын

I have never ever seen an engine video with so much detail. Didn't know I could learn so much in such a short time lol. Great work guys

@REPerformanceUK 2 жыл бұрын

Thank you!!

@fraserhardmetal7143 3 жыл бұрын

This is what our engineering heritage is all about. Can you see the same enthusiasm with an electric motor ?

@davebowman1982 3 жыл бұрын

This is an amazing video, I love this geeky stuff... I'm never going to be in a position where I'll need to build an engine but can still appreciate this sort of content. Good job 👍🏻

@marekz9279 Жыл бұрын

I love the fact that you share the details of the build like Rimac factory does during tours. "Come and see what we do - if you can do it or even do it better, you are very welcome, you simply deserve this".

@jemmett50 2 жыл бұрын

Great knowledge, great for you to share things that could matter to any engine build

@richardfisher726 Жыл бұрын

Very informative and as I’m about to rebuild a V10 it has been a well of knowledge. Understanding blue printing components. Thank you. Rich

@Franz_giblet 3 жыл бұрын

This is fascinating, so many fine details you wouldn’t think of, great videos 👌🏻👌🏻👌🏻

@brynalban 3 жыл бұрын

Fascinating stuff. I watched the Guy Martin videos as I'm a big fan of his, but I've stuck around for Ricky's insights.. Awesome stuff

@jemmett50 2 жыл бұрын

You really got me wanting to build a perfect engine for my clio 197...using the knowledge I have learnt from your experience

@nickbrown3858 Жыл бұрын

Brilliant explanation thanks

@d33dub 3 жыл бұрын

The detail is crazy

@paulwiffen4408 2 жыл бұрын

Such a humble man

@REPerformanceUK 2 жыл бұрын

Thank you!

@manreay6769 2 жыл бұрын

Absolutely brilliant video 👏👏👏

@REPerformanceUK 2 жыл бұрын

Thank you!

@erolfox 3 жыл бұрын

Beautiful engines! A blueprint is a drawing, the original design. So typically "blueprinting" is getting tolerances, etc very precise, to design spec. "Balancing" is getting all the weights close to reduce vibration & unequal stress.

@Tracertme 11 ай бұрын

I luv the banter but I luv these videos even more….❤😊 I would enjoy learning this stuff, it just shows how ham fisted your average dealership is.

@REPerformanceUK 11 ай бұрын

Thank you for watching.

@ericn7698 3 жыл бұрын

Great video! Really loved the advice at the end. Thanks, RE Performance!

@REPerformanceUK 3 жыл бұрын

My pleasure!

@samrodian919 Жыл бұрын

Brill video Ricky you are a fount of knowledge sir for such a young man, even an old man lol Watching that was absolutely fascinating, the science behind things, the way you do things and your explanation of WHY you do it that way was second to none. Ricky, If I had a supercar and it needed an engine build even if only stock you would be the man to do it for me.

@REPerformanceUK Жыл бұрын

Wow, thank you! Glad you enjoyed it!!

@Syncro16TDi 7 ай бұрын

I'm in the process of fitting an Audi S8 V10 to a VW T3 (Porsche gearbox) and that gives me more room for tuning which isn't normally possible. 1) I'm using R8 V10 headers (no cats) but keeping the S8 inlet manifold with flaps. I've seen many people suggest that they should be removed due to failure but mine work. If they work, surely the loss in torque at lower rpm (without them) makes it worth keeping them? 2) Inlet manifold spacers? Worth it for heat dissipation? It will lengthen the intake tract and change the flow. 3) Crank pulley (lightweight). Good or bad? Quicker spin up but less harmonic support /mass for the crank? Excellent channel as always. Michael.

@richardmarkham8369 2 жыл бұрын

Brilliant video. Too bad nobody has done anything even close to this quality on 4.6 Rover v8's. Respect for choosing UK suppliers too!

@REPerformanceUK 2 жыл бұрын

Thank you!

@SonyFoLife 3 жыл бұрын

This is fantastic, keep it up y'all should be getting way more views imma share as much as I can

@SonyFoLife 3 жыл бұрын

Question, you use a coated piston on a standard block but an uncoated piston on a linered block. Why not use a coated piston in a linered block? Would there be any negative effects?

@REPerformanceUK 3 жыл бұрын

Thank you! The coating is to stop the galling that occurs when the piston and block are made of aluminium. On a kindred block it is nickel ceramic coated steel liner so no need to protect the piston with a coating. You can run a coating, it’s just not mandatory like on a stock block.

@cameronsinclair7471 3 жыл бұрын

Great informative video. Looking forward to the next instalment!

@REPerformanceUK 3 жыл бұрын

Thanks for watching!

@surreaLinnovatioN 10 ай бұрын

Can the S6 & S8 V10 be built with the Carillo or Arrow rods and pistons also?

@Daytonaman675 3 жыл бұрын

Cool process and great attention to detail

@REPerformanceUK 3 жыл бұрын

Thanks!

@Daytonaman675 3 жыл бұрын

@@REPerformanceUK I’m assuming you’re Ricky from the R8 talk forum?

@REPerformanceUK 3 жыл бұрын

@@Daytonaman675 I am sir!!

@Daytonaman675 3 жыл бұрын

Gotcha!

@alexnicolaou3579 3 жыл бұрын

HPAcademy show that they balance rods by equalising the big ends on the jig and then shave the small ends to equalise total rod weights. Would balancing small ends add something important to the overall engine balance? My understanding is that when hanging the small end over the scales, the big end bottom half will act as a "ballast" and throw the measurement off a tad.

@azmartin1977 2 жыл бұрын

Hi guys love the in depth vids you do, also im only new to the audi v10 stuff, now is the lambo v10 5.0 the same bore spacing as a rs6 5.0 v10 and doe's have a split crank pin crank or are they just de stroked 5.2 also the rs6 v10 5.0 have you seen any one convert to port injection. cheers

@REPerformanceUK 2 жыл бұрын

No they are all different engines either in cc, bore/stroke, bore spacing or crank.

@TeamAtterz Жыл бұрын

Awesome video! One thing I wanted to ask, Audi suspension (and many others) are torque to yield. Now, I am not going to replace every bolt everytime I need to replace a component on my suspension (thinking upper arm bolts (not pinch bolt)) when doing a wheel bearing for instance. Is there a way of determining the torque required for a stretch bolt once deformed that will give a clamping force that is reasonable enough for it to be safe / effective.

@chillznax 2 ай бұрын

There’s a right way and a wrong way. Right way is to replace. There isn’t a way to determine the torque after the bolt has been stretched, otherwise the manufacture would list it. You’ll get by with it done the wrong way but it’s still wrong. What you’ve done is increased your risk of something breaking.

@TeamAtterz 2 ай бұрын

@@chillznax Understood, I opted for new bolts. Thanks for jumping in and explaining for any others that may ask a similar question.

@plastbestikk Жыл бұрын

Have you tried an ultrasonic bolt checker?

@REPerformanceUK Жыл бұрын

No, I’ll take a look at that! Any suggestions?

@plastbestikk Жыл бұрын

There’s a few good instruments out there, but take a look at NordLock’s Echometer.

@BraycoMicronic 3 жыл бұрын

Guys, what's different with the Audi S8 V10 5.2 to these engines?

@REPerformanceUK 3 жыл бұрын

The S8 V10 is more like the early 5.0 Gallardo in geometry!

@casparharte 2 жыл бұрын

Those Arrow rods are a work of art, but 1.4k a piece seems extremely boutique. Then again they are way way up there in technical superiority.

@REPerformanceUK 2 жыл бұрын

They aren’t 1.4K each.

@casparharte 2 жыл бұрын

@@REPerformanceUK sorry I read their website wrong, it is for a set. Embarrassing.

@samrodian919 Жыл бұрын

@@casparharte when you see those sort of figures you know you've got to read the website again! Mucho embarrasmente lol

@stephenpage-murray7226 2 жыл бұрын

Brand of pins and rings used?

@REPerformanceUK 2 жыл бұрын

CP on our uprated builds!

@stephenpage-murray7226 2 жыл бұрын

@@REPerformanceUK Surprised. Expected it to be Trend and Total Seal…

@Doudou68550 2 жыл бұрын

Hello, I imagine you are a specialist in the Lamborghini V10 engine, I have a really big problem, she uses a lot of oil, I think you have heard of this problem before. From what it could came ? New machined steel cylinder, new segment, new valve stem seals, new reinforced connecting rod. I still have the same consumption of oil with blue smoke. oil on the pistons when removing the spark plugs. is it possible there is a problem in the cylinder head? Is it possible that this is due to an oil vapor return? I take the liberty of sending you this message because no one can find the solution.

@REPerformanceUK 2 жыл бұрын

Sounds like piston ring problem if using oil that heavy but would need to see it to carry out some tests.

@Doudou68550 2 жыл бұрын

@@REPerformanceUK There are new steel cylinders and pistons, and still blue smoke from the driver's side exhaust

@REPerformanceUK 2 жыл бұрын

Drop us an email!!