No video
How does a Resin Printer Work? - Before you begin Resin 3D Printing (Part 1)
Рет қаралды 40,873
6 ай бұрынBUY the Uniformation GKTWO Here
(Global) (Discount Code “FAUXHAMMER): geni.us/Unfoma...
AMAZON: geni.us/GKTWO (This and all Amazon links in our video description are affiliate links. Clicking these and making any purchase will earn us a commission from Amazon at no cost to you)
Get HEROQUEST here - geni.us/HeroQuest
Guy's Video: • Is 3D printing FINALLY...
Golden Demon winning Steve now has his own channel too / @lpp_yt
My Referenced Videos
Configure any printer - • How to Print Perfect M...
Support Miniatures - • How to Support Miniatu...
3D Printing in Cold Environments - • How to 3D Print Resin ...
WIN A GKTWO BUNDLE (SEE BELOW)
Hey guys, after my last video got a lot of feedback regarding it;s length, I wanted to let you all know that this is another video that may not resonate with many of you who have followed for a while. I have about 4 videos aimed at absolute beginners coming out.
The point of this one is for new people to watch before they even consider looking for a resin printer. This is an overview of the whole process, with a few handy tips and is a general guide on how printing works.
The next video will be more about the post-processing stage.
I wanted to go back and do these beginner videos before I move on to more advanced stuff, which is coming soon, including a video on how to dial in your printer perfectly and what all the settings mean (which is a long/boring video) that many people may find benefit from.
Whilst this may not be the video for you. I'd still love it if you could watch it, to help boost it to more people out there, Even if you just click play and leave it on Mute.
I just wanted you to know what this was, before people start complaining it's a waste of time.
WIN A GKTWO BUNDLE
Once again, we have another GKTWO Printer Bundle to give away...
To enter, It's really simple, There are the same simple steps as always to enter - with a twist.
1. Be subscribed
2. Watch the video - to the end
3. Like the Video
4. Comment on the video
5. Share the video ( will check. if you win and then can't show a link to a public source where this was shared, I will rescind the win and do another draw. sorry, This is all about driving Uniformities promotion)
This is part 1 of a 3 part series. So you'll need to do the same next week too! • How to Clean Resin Pri... and the How to Paint Resin Miniatures video (Called Part 3) • How to Paint 3D Prints...
When these videos reaches 100,000 views between, I'll pull one commenters name from a hat, and they'll win a GKTWO, with wash and cure stations.
If you do this on all videos, that's 3 entries
The winner will be announced by me on a livestream and will be contacted by me via my account on here. Your details will be sent to Uniformation who will arrange your Printer, Was and Cure system to be sent to you!
Competition is open to anyone that Uniformation ships to, check eligibility here geni.us/Unfoma...
Join this channel to get access to perks:
/ @fauxhammer
@MidwinterMinis 5 ай бұрын
I absolutely couldn't have done this without your awesome guidance, thank you for being so generous with your time and patient with my stupid questions. ... but you're absolutely wrong about that HeroQuest rule ;)
@fede4819 5 ай бұрын
What i want for ALL future 3d printers is to have a heater by default, it's criminal to not have it in 2024 as it's such an essential part to ensure good printing.
@rustyshaklford9557 5 ай бұрын
It's not like it's difficult or expensive either; I doubt integrating a vat heater would add more than $10 in manufacturing cost per unit.
@Kiddeth 5 ай бұрын
if you can't afford an external heater, how did you buy the printer. so no its a lame idea and just an added expense and something else to go wrong
@fede4819 5 ай бұрын
@@Kiddeth That's an hilariously bad take and dumb reasoning, it's better to have an essential feature already builtin instead of having to spend extra time, troubleshooting and money to add it anyways to get an acceptable experience, especially when it doesn't add much cost to begin with.
@BisphamTangerine 5 ай бұрын
@@Kiddeth 😂😂😂😂😂😂
@erdsim4248 5 ай бұрын
When I watched to video, I realized that we only need one thing that is the heater. In fact, all the other parts are added for nothing, you dont even need the screen for resin printing. Just heater, heater and heater. Since GKTWO is the only model on the market with a heater, this makes it perfect :)
@CHlustanec 5 ай бұрын
I just conviced my wife, that we really need a 3d resin printer in my...I mean in our lives. Now I need to learn how to use it, because I really want to avoid "I told you its nonsense" situation :D
@wolfiere6825 5 ай бұрын
As someone who uses FDM almost daily now, I have always wanted to get into resin just for the quality you can get in prints both for busts and minis. This video has been super informative.
@nm72510 5 ай бұрын
Knowing more about resin printing would have helped me substantially. I came from FDM printing terrain. I bought my first resin printer without realizing how frustrating and expensive it could be. I literally gave up after my first attempt and returned my printer. About two months ago, I bought a GKTwo and my experience has been significantly better.
@hannuhanhi183 5 ай бұрын
I have both a resin printer and an fdm printer. In my experience resin printing has been far easier than fdm printing. FDM has trillion variables to fiddle with try to find the optimum result, clogged nozzles, overextrusion, underextrusion, blobs, bed adhesion and numerous other problems. Resin, so simple and fast too. The print quality is super smooth, not achievable with a fdm printer.
@Mr.MightyGaming 5 ай бұрын
Your videos have been a huge help with helping me decide if I want to get into resin printing. I already have a FDM printer, but it wasn't printing at the quality I wanted for miniatures. I ended up buying the GKTWO set as my first one today based on yours and some of the other reviewers! It's great content and really helps to inform us newbies trying to get into the space so thanks a lot!
@lucaclerici1858 5 ай бұрын
Thanks for shedding light on resin 3D printing! As someone familiar with FDM, this is my first dive into resin printing. Your video provides invaluable insights for better understanding this world. 🙌
@Lingsais 5 ай бұрын
I work with 3D printers at work, but don't own a resin printer myself, I do recommend this hobby to anybody who has time and a safe space for resin. A resin printer at home would be great though!
@Tarok-2316 5 ай бұрын
I do love 3d printing, I had a Prusa mini and a Anycubic mono X both destroyed in a fire in my basement 😢 ( caused by a washing machine not them). One day I would like to purchase a Gktwo and a P1S, but those 2 will always remain in my memory and my heart ❤️
@colinrice9302 5 ай бұрын
After finding out about 3d printing, trying it on a cheap fdm, failing, then finding out about resin and not wanting to fail again, I started watching many many vids. I finally found a trustworthy voice of guidance. If I don’t win, I’ll probably save up and buy one anyway. Thanks for your honest reviews.
@NickCutlass 5 ай бұрын
From the rule book “the special treasure is discovered only once by the first hero who searches the room for treasure, even if other heroes later search that same room”. No mention of having to be adjacent to treasure in any of the rules on searching for treasure. It specifically states “as a hero, you must first verbally declare your search. Do so by saying I am searching for treasure. Searching means you are looking around, opening things, searching for interesting objects and gold coins, regardless of what square you are on in the room. Do not move your hero figure when you search”. Seems pretty clear to me, you were right, he was wrong 😂
@afo5924 5 ай бұрын
that man had exactly the same journey as me with the Anycubic, thanks to all the videos you make I am now thinking to give resin another try with the GK-TWO.
@hamthomas4715 5 ай бұрын
I'm so very thankful I found your content BEFORE I fully invested in resin printing! The process has been sooo easy compared to the horror stories I've heard others have gone through, and that's all thanks to you!
@GameUpOG 2 ай бұрын
I've been printing since the pandemic started, and this video still taught me things I didn't know about, like increasing the lift height on printers with larger build areas.
@FauxHammer 2 ай бұрын
Thank you
@JosephPalma 5 ай бұрын
Been 3d printing two weeks and I'm just finding all the best KZfaqrs. I'm only doing fdm for now but do plan to add resin eventually. But I've watched a bunch of your videos and especially love you not blowing smoke about the differences between resolution and similar.
@Aztechnology. 5 ай бұрын
Heated vat to 30c/86F is just so crucial to me for getting consistent prints, with high accuracy. Plus it's so much easier to work with warm resin. Heated Vats and Self Leveling beds really should be on every resin printer.
@RocktCityTim 5 ай бұрын
Great job on that animation. The sliced veggie is a good verbal representation, but that animation is perfection in getting across the build process. The GKTwo is an amazing update to the options.
@tcunero 5 ай бұрын
So nice to have a miniatures printing channel. Honest fair and open. Thanks!
@rorycampion5890 5 ай бұрын
Just what I needed, been FDM printing since Christmas but have gone from Cosplay helmets to sculptures/miniatures and have now started diving down the Resin rabbit hole and it's a little scary!
@reprinted3D 5 ай бұрын
I have a friend in Discord who I just sent my old Anycubic Photon that had been collecting dust since it got replaced with an Elegoo Saturn. He's new to resin printing so this video will definitely help him!
@pekekang2939 5 ай бұрын
I have an FDM printer but I wasn't satisfied with the level of details I get with some figures. I love my FDM printer but I have been on the look-out for the best resin printer on the market. Living in the UK, I feel like the GK 2 will be a great option for resin printing with its built-in heater. This video is exactly what I need to start my 3d resin printing journey.
@ChitosVids 5 ай бұрын
To answer your hq question, the first hero to search the room gets the special treasure. When searching for treasure it says in the current rules that its assumed the hero searches the whole room. Sometimes the special rules for a room/treasure even states the first hero. Also of note is that in the original release of the game different regions had different rules and in some regions the rules were more difficult.
@AlberichKupferbart 5 ай бұрын
Coming from FDM printing, theres so much more to learn. I think I need to dial in my Settings from start. Thank you verry much for your very informativ videos.
@originalbeavisbob 5 ай бұрын
I started my adventure with 3D printing at the beginning of COVID and bought a Creality FDM printer. I had ok results but ended up wanting a larger build plate and turned around to get an Ender 3 Max. Had much better results and have printed a number of projects that I still use. I’ve been wanting to get a resin printer to print higher detail models, like a model of the Black Knight from Monty Python’s Holy Grail with spaces to place magnets for the removable arms. Love your video and I now have a new rabbit hole to watch the rest of them!
@Captn_Grumpy 5 ай бұрын
A couple of the most important points you reference that are often overlooked are temperature, the number of debates I have had with people on this amazes me considering it is written on the bottle usually, and flex in the PTFE sheet being variable. To add to this it can also significantly vary and impact prints depending on location on the build plate, for example lift speed with low flex in the extreme corners may fail compared to success in the middle.
@Grind86 5 ай бұрын
Recently had to quit my job for medical reasons after over a decade. Passionless experience. Trying to start over with something that I can truly sink my teeth into and be happy with. Hobby and gaming 3d printing is path I have chosen. Thank you for your educational videos, they have helped immensely in getting through the learning pangs.
@user-le7br1cg4e 5 ай бұрын
Trying to restart this hobby, and been watching your video for the last days (a lot)! Huge thanks for being so direct and transparent. Super well done! Especially the videos of screen resolution being irrelevant were a bit of an eye opener. Well done!
@DerekGuder 5 ай бұрын
It was great to see you & MidWinter do a collaboration. Love both of y’all’s work.
@Mikepaintsred 5 ай бұрын
I've been umming and arring about getting into 3D printing the last few weeks and your videos have definitely steered me in a direction which is making it look more likely I will be confident in starting!
@HamsterChew 5 ай бұрын
It was your channel that got me interested in printing in the first place. Thanks for your time and effort.
@josephhalfacre1584 5 ай бұрын
Great video with lots of great info. I think a big help for people who don't like "long videos" is to have time stamps that help impatient people move on to the info they actually need or want.
@rommelvfx 5 ай бұрын
I like the heater in the GKTwo. I keep my printers in a metal cabinet, and I live in Southern California, so temperature and humidity usually isn't an issue. But a constant temp would be ideal.
@garolish 5 ай бұрын
As always, nice and informative video. Even though I am not a beginner I can only appreciate you helping out everyone who is starting
@michaeljames0204 5 ай бұрын
Ive been considering a 3d printer to augment my 40k addiction for some time now. The Uniformation GK2 seems like a good setup to future proof my printing goals. Thanks for all your wonderful content, it all makes learning about this hobby a whole lot easier!
@PereMorata 5 ай бұрын
Since I discovered your channel, I do not miss any of your videos. Uniform GK two was a blast when you first reviewed it
@punchboardchampion9266 5 ай бұрын
I'm currently saving to get a resin print. So much info on all the different print it's easy to get overwhelmed but your videos have been a great resource.
@predator837 5 ай бұрын
Alot of great tips for someone who have researched the trials of a 3d resin printer. I will come back too this video when I get my first printer
@harryatkins 5 ай бұрын
Even to someone who is already familiar to printing, I found it quite helpful to relearn things. Also there's settings that I avoid changing because I don't really understand the implications of changing them - so I look forward to the next video explaining them.
@susand8816 5 ай бұрын
Thank you for doing this video series. I have friends and family who want to know about how to get started. Now I can add this series to my recommended list.
@pwgreene 5 ай бұрын
I've had my resin printer for about 6 months now, so I have a pretty good grasp on the basics, but this video is invaluable for anyone who is brand new. I'm very much looking forward to part 2, as well as any videos about slicer settings.
@msamyweber 5 ай бұрын
When I started 3D printing, I was for minis. And not to fine a point on it, D&D style minis. I grew up on D&D and 3D printing then painting my own was like Charlie & the Chocolate Factory. Then of course came all the cosplay and everything else. But my first printers were resin, solely for the detail! Resin remains my go to, I say I print 80/20 resin to FDM. The mess and effort, worth it to me, solely for that detail. I live alone, I am home-bound disabled, my apartment is basically my 3D printing & painting studio that I happen to live in. The majority of room is taken with machines, workbench, painting area and so on. While the kitchen & bedroom is where I live. Many may shake their heads at this, go ahead, but this is my zen. This is what brings joy and zen to me. This is what helps me forget, at least for moments, the pain I endure all day.
@jamesambrous 5 ай бұрын
Thanks for all the great resin content. Currently using an ender 3 but really want to upgrade to a resin printer. This process still feels like magic to me just watching the prints rise from the liquid. Just wild.
@obsidiancube174 Ай бұрын
So I've been thinking about what kind of printer should be my first 3D printer, FDM or Resin, and this video easily made convinced me that it should be resin. I think the mess is worth the results.
@egoncalo 5 ай бұрын
This was incredibly helpful already even in one part. I've been hemorrhaging money on Warhammer and started looking into 3d printing for terrain. I was about to fall off the deep end on this stuff and your video let me slow down and learn before making a decision. I'm looking forward to future videos!
@NathanielTeel 5 ай бұрын
Temp really is critical. I purchased a heating band that's used for brewers and hot glued it to the inside of my printer lid to try and help maintain a dependable temp.
@tonyanaya8540 5 ай бұрын
Thank you. You have made the dive into resin 3d printing less stressful compared to jumping in blind. Your videos are extremely enlightening
@teddiesmooth 5 ай бұрын
The chamber heater is key. Summer, winter, and everything in between, 28⁰C and no failed prints (20kg later). Hero Quest... When my brother and I were kids, we had a gentlemen's agreement that the person who searches gets the treasure. 30 years later that agreement still stands.
@Yhutubman 5 ай бұрын
If I remember correctly, my friends and I had to kill all the enemies in a room to search it. We could all search it, but the first one would get the special item if there was one. Of course... the argument of ... "that's the way it's played in my house" always applies. Even if they are videos aimed at beginners, it's always good to review well explained concepts. Thanks for your work.
@RobertKappes 5 ай бұрын
I learning about 3d printing and wanted a FDM for minitures, but watching several of your videos I am now leaning to resin one.
@cbytenski 5 ай бұрын
I have to say I was interested in resin printing for a few years now, but didn't dive in till I found your channel. Your videos gave me the confidence to give it a go and have loved every moment of it. I'm now looking at getting a second printer. Thank You!
@johnrandecker8063 5 ай бұрын
I've been using FDM printers since before the Ender 3 was first released but have never taken the plunge into resin printing. It's nice to see honest videos about what the pitfalls and issues are. Keep up the great work.
@ChickenSims 5 ай бұрын
The chamber heater is ace. I bought an aftermarket 5W heater connected to a hydroponics sensor to keep my printer ~28C through the winter.
@PaulMD 5 ай бұрын
As an FDM'er, I'm looking to dip my toes into resin printing and your videos have helped a great deal! BTW, I think Guy is right after a quick google! Edit: Turns out google was wrong and you are correct!
@Graloth 5 ай бұрын
Very informative, I had already done a lot of reading up on resin printing, as I'm currently looking to move into resin printing, have been printing on FDM printers for many years now, and with the GKTWO it seems there finally is a resin printer that suits me.
@GCheung55 5 ай бұрын
I like the overview. As someone who’s been deep into FDM, resin is interesting with the difference in surface quality.
@theo._.5593 5 ай бұрын
Always great to cover the how to to beginner to expert, there's always new ppl jumping in and new tips to discover so I salute you for doing this :)
@theborgster8497 5 ай бұрын
This is the channel I needed to find before flogging my first resin printer. Going to have to start over again.
@jon007agent 3 ай бұрын
3d printing is such a fun hobby. This video will definetly help anyone who is just getting started
@Moah333 5 ай бұрын
You are correct, you only need to be in the room and be the first to search, you don't need to be adjacent to the furniture.
@JonnielConCarne 5 ай бұрын
I’m looking to get into 3D printing as a hobby and finally decided that a resin printer checks a lot of boxes for me, but the biggest issue I have is that I live in an area that has very cold winters. I’m glad I saw your video on the GKTWO because a heated reservoir is exactly what I need for the area I live!
@martinwiggins6548 5 ай бұрын
I've been doing FDM since I started playing with it during the lockdowns. I started with an Ender 3, did a lot of learning, and a lot of modifying, had a lot of failures etc etc. Last year I bought a Bambu X1 Carbon and it, just, worked. It's fast (relatively to an Ender3 anyway) reliable, and just easy. I've now got some ideas for projects that I think would be better suited to resin printing, and I'd love to start somewhere nearer to the Bambu, than the Ender!
@DFDragoon 5 ай бұрын
Great vid to help new folks out. Was just talking about resin printers with my brother as he expressed some interest and asked me about them. Will make sure he gets a look at these vids. Thanks again!
@joelfeliciano6230 5 ай бұрын
I have quite a few friends who I have sent your videos to to help them get started with resin printing ans understand how much of an art it is to prepare, support, and slice a file for a resin printer. That sequence of events is just as important as the model itself, if not more important
@swaslaukinonome 5 ай бұрын
Thanks for saving my, and, I'm sure, many other people's time with all this clear and organized information. If only I realized how much temperature matters earlier! I knew I was missing something. Next printer I get will be heated, ideally as a built in option like the GKTwo.
@karljackson9523 5 ай бұрын
I've always shied away from Resin printing, the process and mess has put me off. But the improvements in resin printers nowadays and the convenience of self filling resin bottles as certainly made it more attractive. Great video and explanation! Thanks
@Laprak098 5 ай бұрын
The heating element is what’s selling this resin printer to me much more innovate then some other brands
@Starfury0042 5 ай бұрын
I'm in CA where it's mostly warm - but it is winter so it's gotten horribly cold a few times - down into the 40s (4.5C) but now it's warmer - but not warm enough to print. I'm building a box and have a space heater/thermostat so I don't have to worry about the cold. Seriously - I had to leave the house with a flannel coat.
@InKevITrust 5 ай бұрын
Will always start my resin 3d printing research here before going anywhere else when I finally get into it.
@Ezacu 5 ай бұрын
Decided to look into resin printing and one of your videos on the GK TWO came up. Really makes it seem like an approachable way to print models.
@CAPEDM 5 ай бұрын
I’m extremely grateful that I discovered your content prior to fully diving into resin printing! The procedure has been incredibly straightforward, unlike the daunting experiences others have shared. All credit goes to you!
@donnell9238 5 ай бұрын
Going to make my first purchase, one of the Phrozen Sonics mini or mighty idk yet.
@manuelgaertner6834 5 ай бұрын
Combining two channels I really like, awesome! I went through the same as Guy. I had a anycubic mono and I really just had a few successful prints by accident. I even built a heater for it to help me. Now I want to upgrade to a more modern printer, which will hopefully make things easier
@gkillsblast 5 ай бұрын
Been wanting to get back into the hobby because of the gk2. So im glad you our running through the basics while giving people the chance to get such a great machine.
@clauberalex 5 ай бұрын
Since I've been researching resin 3d printing myself for the last few weeks, this video is just what I need! Thanks!
@hdtpick 5 ай бұрын
Love all of your videos. Your videos got me into 3D printing and I can't get enough of it. A GKTWO would be an amazing addition to my 3D printing set up. Thank you FauxHammer
@oniaeon 5 ай бұрын
Thanks for all the great content spreading the good word of 3D printing and how it's not as horrid to get into as people think
@SirLANsalot 5 ай бұрын
Best thing to think on with FDM vs Resin. FDM printers can do large models, much much larger models at the cost of not being able to do micro small details. Resin printers can do INCREDIBLE details BUT at the cost of not being to print nearly as large of a model, or as many models at the same time. Also with FDM, once the print is done, its done, no post processing needed, pull off the plate and start another. Resin has a LOT of post processing, washing and curing the model before its actually done. The line between the two types of printers is starting to blur, as FDM printers CAN get super detailed too but do take a lot longer to complete at that detail level. Resin printers are starting to get bigger, with the biggest ones rivaling the build volume of basic entry level FDM printers (Elegoo's Jupiter resin printer). Cost for getting said resin printer size is quite high, where as with FDM printers, you can get super detailed for real cheap. As in a FDM printer with a .2 nozzle can get the same layer heights a resin can do but it takes a real well tuned machine to do it. Resin can do those layer heights, all at once, which is where the speed factor comes in. FDM has to draw the same line over and over and over again to complete a layer, Resin can do the whole layer in a single phase. If all things being equal a Resin printer will complete a model faster then a FDM at the same layer height.
@Legionx17 5 ай бұрын
Been learning 3d printing over the last month or so. Started off with FDM and I would love to learn resin as well. Your vids are a huge help and inspiration. The Uniformation GK2 is the printer I was leaning towards since your vid 9 months back. Thanks for another great vid!
@Spetz83 5 ай бұрын
Been watching your reviews for a while now. Getting super close to pulling the trigger on a printer. New to the painting hobby and think it would be really fun to start printing models and painting instead of ONLY buying from GW. Anyways, this kind of content is exactly what I need to figure out if I am going to be biting off more than I can chew. Thanks!
@hifischlp712 5 ай бұрын
listened to this video while I was cleaning and curing my last 3d print. I love to freshen up my knowledge on the hobby and especially the safety issues. Gladly am still doing everything right up to now ^^
@LAwizard 5 ай бұрын
I've been in limbo choosing between printers the last month but I do feel the GKTwo is the best resin printer a beginner can get. If I don't win, Ill probably wait a little longer for printers to include heaters. This video was a great refresher
@michaelpurvis2387 5 ай бұрын
This video is very helpful for people like me, who are thinking about shifting from FDM to resin printing.
@gregoryamer 5 ай бұрын
Thanks for the channel. Getting started with resin printing seemed extremely intimidating for me. Your videos helped me make a decision to try it.
@IsaacJohnson2 5 ай бұрын
Just got into printing, this was very informative. I'm looking forward to the next in the series. Glad someone linked to this in grimdark.
@tonyc5659 5 ай бұрын
I have been watching resin printing videos for the past year, all the while trying to decide on which printer will be best for my needs/wants. The GK2 is on the top of my list. I live in a very warm and humid climate and my printer will more than likely be set up in my attached garage. Your videos have been very helpful in understanding the basics of resin printing. I still feel like I need an engineering degree but, your videos have been extremely helpful. I no longer feel like I need an engineering degree to understand the basics. On a side note, I don't know who is right or wrong regarding your Hero Quest dilemma. If common sense prevails, one would think you have to stand next to something in order to touch it, meaning you have to be next to it to open the chest. But since I don't know the rules to Hero Quest, I will leave that question to someone other than me. 😂
@affroking 5 ай бұрын
Literally just watched this after I setup my new GKTwo, was invaluable, thanks for the run down of the fundamentals
@samanthalacroix2687 5 ай бұрын
I loved the video, you covered the basics rather well. I have a Creality 4k, type 6 and I have learning the basics with her for almost a year now. The only recommendation I have to offer is I would have added a bit about the differences between what resin and FDM printers can make. Resin is the best for minis and detail work but FDM is best for terrain, helmets, and things that need durability. They both open avenues of creation but they are vastly different.
@donchooluvit3275 5 ай бұрын
I'm currently on my third printer. Started with the Anycubic Mono X, then the Saturn 2 8k, and now the Saturn 3 Ultra. I also started with an Ender 3 , and now (after 3 years of tinkering, modding, rinsing and repeating) I'm running the X1C from Bambu labs. Your most valuable video to me was the comparison between ACF and FEP/NFEP. It convinced me to put an NFEP Saturn 2 vat on my Saturn 3 to preserve the finer details on my minis (especially teeth or fingers/claws)
@wesleyd5315 Ай бұрын
I love the fact that I've watched that video from midwinter minis about three times and when I started looking into 3D printing I just so happened to find your channel, the one he had brought in for that video, completely by happenstance. Happy accidents.
@FauxHammer Ай бұрын
nice to see you back then. Yeah Guy is a great bloke and a fantastic host. it was a pleasure to meet him and help out! He's done plenty for me
@Tetsant 5 ай бұрын
When I first started resin printing, it was terrible, I am glad the hobby has grown so much
@user-ne7ob1he5l 5 ай бұрын
Found your content while researching what resin printer i should get. Been printing in FDM but looking forward to the quality I can achive with resin. Thanks for the great videos 👍
@charmande80 5 ай бұрын
I never heard of the GKtwo until your videos. Really love this printer. Great videos.
@Pass990 5 ай бұрын
Big Fan of your videos! Thanks to you I'm a resin addicted! Jokes on a side, I really think you are one of the most helpful youtuber regarding printer information Congratulations!
@mfenninger056 5 ай бұрын
The quality of a resin printer is amazing. This printer seems to be one of the best out there. Thank you for the video.
@JasonNimz 5 ай бұрын
Fantastic video. I agree the Uniformation printers are amazing. Other MSLA manufacturers should take NOTES! I really appreciate the honesty of all your review vids.
@stevemitchell5269 5 ай бұрын
I picked up the Geeetech ALKAID about 6 months ago and have been happily printing little things with that, but seeing all the fine detailed larger models available I've been eyeing up a larger printer, I've watched a lot of review videos from different places on many of the available options and it was your video on the GKtwo and the Printer of the year 2023 that set me on course to get one, now it's just about saving up and making more room in my work sapce!
@Jerrie-Lenore 5 ай бұрын
Nice! Honestly, I like the long meandering style that keeps it interesting to the end. Distractible has its upsides!
@dk292 5 ай бұрын
The heater looks like such a great quality of life upgrade, wish all printers had it
@Johan-is4nz 5 ай бұрын
I recently started 3d printing and I'm really into warhammer so your videos are just perfect to learn everything there is to know about 3d printing, thank you !
@Rayo6o6 5 ай бұрын
I think I have watched the best of 2023 lineup video about 10 times still deciding on a purchase, to the point the person sitting nest to me at work actually commented asking if thats the same video I watched before lol. Thanks for everything. Keep up the great content.
FauxHammer
Рет қаралды 145 М.
Adamant IT
Рет қаралды 10 М.