Please put this into a regular car, and measure the torque and power! I think many people are interested in how much you improved the original 4 cylinder engine. Please make this happen!
@thepunisher6231 Жыл бұрын
ye i am 100% for it
@dayeverydae Жыл бұрын
Yes, he needs to put it on a dyno.
@Nevakonaza. Жыл бұрын
Yes yes!
@mattlawton4715 Жыл бұрын
Me too 👍👍
@bal_723 Жыл бұрын
They forgot about this engine now.....(
@Turbowagon2 жыл бұрын
If you continue to have issue use an annealed copper plate for a hesdgasket. It will seal much better than a fiber gasket and can help with minor imperfections
@delta6142 жыл бұрын
@@animalmother9339 the copper spray works liek a charm when applied to both sides of the gasket
@DigBipper1882 жыл бұрын
That'd work quite well. not to mention it can be re-used too if they need to remove the heads by just annealing the gasket again.
@Turbowagon2 жыл бұрын
@Ouchwitz Summer Camp LLC been watching a while. They're definitely learning as they go, maybe a few Years ago they would have.
@QuantumLeap832 жыл бұрын
@@animalmother9339 works great I've used it on several rebuilds. Not as good as an actual copper gasket tho.
@thedude77262 жыл бұрын
@@animalmother9339 ive used it tons on small engine builds. It helps transfer heat better but cleaning it off and old build sucks
@DigBipper1882 жыл бұрын
Y'all should make an inline 8 with the two halves timed either 90* or 180* out of phase from each other... Wonder how that would sound with a basic straight pipe on it...
@jwalster94122 жыл бұрын
Trying to see a group of Russians make a V10 engine out of Lada parts would also be quite entertaining.
@DigBipper1882 жыл бұрын
@@jwalster9412 I second that. Or even a V12 or V16 :)
@hotasianstepsister30392 жыл бұрын
Wouldn't it better if the same matching piston fires at the dame time???
@jwalster94122 жыл бұрын
@@DigBipper188 there is nothing better than a V10..
@erikdikkers79312 жыл бұрын
@@jwalster9412 v12
@ndc5544p2 жыл бұрын
I woul love to see a drag race between a stock Lada and a Lada fitted with the 6 cylinder engine
@johnwilson17942 жыл бұрын
Reminds me of TG when Richard Hammond said "I'll hold up this rock and as it's eroded by the wind it'll give us some idea how long it's been.
@Simon_r26002 жыл бұрын
Or the Ladzilla!
@jstoneracing Жыл бұрын
The 6 cylinder thats clearly down on 2 lol
@Hybris511292 жыл бұрын
You guys have to try making even more exotic engine configurations like X pattern or slightly easier H or U pattern engines. With enough welding and Lada engines anything is possible.
@georgekurgansky59862 жыл бұрын
It will need major oil modification. Engines don't do well upside down.
@dragonplatform2 жыл бұрын
Or they can make a crossplane inline 4 engine like in yamaha r1. How can that sounds made from lada engine.
@kristianperryadams2 жыл бұрын
@@dragonplatform +1 for cross plane that would sound so good 📈
@jwalster94122 жыл бұрын
@@georgekurgansky5986 you could create a form of X engine using 2 VR engines around 160° apart
@pflaffik2 жыл бұрын
That would be in line with Vlads philosophy “when in doubt: add more Lada engines”, and it will obviously still defy every aspect of practicality and efficiency. Part 2 of Vlads philosophy is “when out of Lada engines: Add some Russian babes”. My motto is When In Doubt Add More Chinese Girls, proves that great minds think alike.
@emilschw89242 жыл бұрын
What about making a V8 from two 4 cylinder engine blocks? I like this channel a lot, and the crazy ideas they come up with.
@79huddy2 жыл бұрын
Put two side by side and join them with chain drives front and rear with the engines phased 180 opposite each other and sync phased to see if it makes a power difference 🤔
@robertcoldham68492 жыл бұрын
I don't think its running on 6 cylinders, if as I think you have one spark plug piggy backed of another one then only one will spark as electricity will always take the easiest path. You need to modify the ignition system.
@twoeightythreez2 жыл бұрын
All they have to do is modify any 6cyl distributor to have the lada base, they are easily capable of doing this, hopefully they do.
@HIDHIFDB2 жыл бұрын
They need to use the ignition system from a old BMW or Jeep
@malancaluciano12532 жыл бұрын
@@twoeightythreez no, this thing does not fire even at 120 deg intervals
@malancaluciano12532 жыл бұрын
@@kjetiloftedal338 yeah, i was thinking the same. One in top of the other. And 2 cylinders fire at the same time in big bang style😂
@LeoKadettTouringCar2 жыл бұрын
@@malancaluciano1253 better try old l6 distributor because it never will work since you need 120° for spark and you will got 180° dosent matter how many distributors you install.
@julyamaxfield59792 жыл бұрын
Use that two cylinder engine you made before as a compressor to supercharge the inline six
@greekartvlog87122 жыл бұрын
why not combine the 6 cylinder and 2 cylinder engine to make a new 8 cylinder straight?
@jasonharrison252 жыл бұрын
2 cylinders worth of air is only 1/3 what the inline 6 uses. it would be a net loss. you would need to switch it to the 6 cylinder pumping into the 2 cylinder engine for 3x the air
@servicetrucker55642 жыл бұрын
@@jasonharrison25 Or use gears to overdrive it
@AlienLivesMatter2 жыл бұрын
Use a wrecked rotory as a supercharger
@pflaffik2 жыл бұрын
The supercharger would need to run at a higher speed, and the camshaft modified to 2-stroke. Traditionally such air feed cylinders were of large diameter and also double acting.
@d455ave2 жыл бұрын
It would be interesting to pit that 6 into an otherwise unmodified car that would have gad the stock 4 it started with. Then you can compare stock to your upgrade more directly.
@Simon_r26002 жыл бұрын
Or race this one to their Ladzilla
@cornelius63042 жыл бұрын
The fact that, that engine is overheating in that cold is astonishing
@superchickenlips12 жыл бұрын
Make another 6cyl from Lada engines, then make those two 6cyl engines in to a glorious Lada V12.
@BlindDude2 жыл бұрын
Man that translator is funny. I love how he changes his voice for different people talking... EPIC!
@pflaffik2 жыл бұрын
Its how dubbing of movies is done in Russia and several easteuropean countries. In the west it was known as Polish Dubbing. Keeping the original dialogue as background sound is also very common in Russia. For bigger high budget foreign productions i believe its common for Russia to have several voice actors for each movie but each will still portray several characters each.
@jerryb12342 жыл бұрын
These guys do it all, even when they probably shouldn't, lol, that car looks like some sort of bug getting ready to pounce on ya, lol, great video guys, thanks for sharing.
@googlenutzer13132 жыл бұрын
My Mind :D
@matthewwiddows63192 жыл бұрын
you were only going to get 50% more of "not alot of power", but absolutely amazing the fact that this chopped and welded engine runs. well done guys.
@mikedrop44212 жыл бұрын
Right? They only claim 73hp new. Those motors were definitely not new. Weld 4 entire motors together and they still won't be making a bunch of power
@NeroKoso2 жыл бұрын
@@mikedrop4421 there is a lot of losses. It's not even 50 %. I would be surprised if it even kept the power of 4 cylinders.
@mikedrop44212 жыл бұрын
@@NeroKoso oh I know. My point was that even if you made a fully functional w16 with no loss its not even gonna break the 300hp mark
@danielclifton61402 жыл бұрын
I'd love to see you guys make a mid-engine/rear engine front wheel drive car
@operator80142 жыл бұрын
Lol, burnout king!
@freddieparrydrums2 жыл бұрын
The worst way of any car. Weight over the unpowered wheels xD
@drakeyyy2 жыл бұрын
@@freddieparrydrums isn't fr the same then
@sneez94612 жыл бұрын
@@freddieparrydrums Yes! imagine that car, driveshaft going in the middle from rear to front wheels
@yorle65272 жыл бұрын
@@drakeyyy but when its accelerating the weight shift backwards so its provinding more grip to the rear, comapred to an RF engine
@frederikclaeyssens92012 жыл бұрын
12:12 Is just the perfect summary of a Lada. I love it.
@otm6462 жыл бұрын
I would love to see a fully hydraulic build. Hydraulic pump on the motor, no physical connection to the rear axle just a hydraulic motor. If you could get a variable displacement pump you would have a massive range of gear ratios cvt style.
@manager96ful2 жыл бұрын
Or torque converter.
@DemetrisIacovides2 жыл бұрын
This could possibly be an astounding thing to see.. Certainly interesting as an idea.
@otm6462 жыл бұрын
@@DemetrisIacovides I've seen it done in wild 4 wheel independent drive rock crawlers but never in an on road vehicle. Curious what type of efficiency loss they would have.
@pflaffik2 жыл бұрын
You need wheel hub gears for it to work with axial type hydraulic motors, adequate radial types are too expensive and still need about 0.5 rpm to start pulling, would still be problematic to get it rolling. Forklifts use axial motors and hub gear, feels redundant to point out how slow they are.
@tai87aimis2 жыл бұрын
i do agree too! 👌👍
@Micharus2 жыл бұрын
Would love to see this engine in a 'normal' Lada, it would be pretty cool.
@creepingjesus51062 жыл бұрын
TUUUUUURRRRRRRBO! That is all. Thanks for coming to my TED talk on 'Stating The Bloody Obvious'.
@4doorsmorewhores182 жыл бұрын
Am bouta drop a tear , been waiting for this for a whole month ..
@northernjoethedroneguy13782 жыл бұрын
Loved the snowball at the end! Great bunch of guys.
@samsungtvset33982 жыл бұрын
When a spark plug fires, the voltage across it drops from 15-20kV to about 1500V for the remaining duration of the spark. This motor has the plugs for the two additional cylinders connected to two existing plugs. That means when one of the paired plugs fires it will steal the voltage needed for the other plug to fire. It is rare for two plugs to fire at exactly the same voltage, so whichever one fires easiest will prevent it's mate from firing. So the motor will not consistently run very well.
@TM-dh2xb2 жыл бұрын
Would it be possible to change the alternator, battery, and/or coil to increase voltage?
@ExplizitDuester2 жыл бұрын
@@TM-dh2xb 6-cylinder distributor and single coils would be my idea but IDK never build a 6cylinder lada
@jeremyhanna38522 ай бұрын
Make it coil on plug with a homemade crank trigger it's done on race cars all the time
@schumannresonanceswithverte2 жыл бұрын
I love his enthusiasm, and optimism.
@28YorkshireRose122 жыл бұрын
Well, for a bodged up/welded up heap of scrap, that thing does a pretty good job - - - Of sounding like a classic VW Beetle! Now, how about making an 8 cylinder version? - Run the cranks timed at 90 degrees out of sync with each other, but otherwise run as two engines with synchronised throttles and separate manifolds.
@T3ddyRuxp1n2 жыл бұрын
You forgot to mention the twin turbos
@themightydrive66942 жыл бұрын
I feel like theve done that before A lada with 2 engines on the front
@Fileeraus2 жыл бұрын
It would be great to see them making some power with these engine mock ups, and preferably in a car that is not a total jalopy.
@28YorkshireRose122 жыл бұрын
@@themightydrive6694 They've definitely done multi-engine Ladas, but what I'm suggesting is to join two, four cylinder engines together in the same vein as this "one-and-a-half" engine arrangement, and so that the engine blocks, and the crankshafts are welded solidly together as single units. In effect, a straight-eight.
@themightydrive66942 жыл бұрын
@@28YorkshireRose12 They’ve literally done that Just search up 2 engine lada and youll find it
@andreedu9962 жыл бұрын
Add individual carburetors to each piston it could help increase the power and it would look cool
@engineprojects2 жыл бұрын
1 bucket fuel per mile 😋🤣 whit that consept
@orcetrpkovski19842 жыл бұрын
if planning part 3 of the inline 6 engine I would love to see upgraded cooling, maybe find a better, more precise way of distributing spark, maybe that's one of the problems for not always working on 6 cylinders. Expecting a part 3 Cheers :D
@thogevoll Жыл бұрын
Love seeing what you guys come up with. BTW I have two sons who I adopted in Izhevsk 25 years ago. They've grown into a couple of fine young men.
@lassediscovers18132 жыл бұрын
Suggestion: make a electric-Lada using only startermotors attached to the gearbox!! Lots of them! TESLADA
@lassediscovers18132 жыл бұрын
Yes they will overheat. And yes, a customized alternator would work better. And yes it will not have a lot of range.. heard it all before. But yet, it is MY suggestion!!
@Wok_Agenda2 жыл бұрын
How many times we must see this comment? Aren't you tired?
@SwapBlogRU2 жыл бұрын
I suggested the idea (as I also noticed that this one comes up quite often), and apparently some Russian channel has already done something similar, which makes it a less interesting prospect for Garage 54.
@Wok_Agenda2 жыл бұрын
@@lassediscovers1813 Grow up man
@Wok_Agenda2 жыл бұрын
@@lassediscovers1813 You must be 12
@timbrwolf11212 жыл бұрын
It even sounds good at heart. Some fit and finish and it would be fairly impressive!
@WikWak2 жыл бұрын
1 HT lead can NEVER fire two spark plugs. It will choose 1 ground(spark plug) each time it fires. I have tried something similar before and it failed for this reason😂
@skylined55342 жыл бұрын
I suppose even if it did split between two plugs they'd be pretty feeble sparks 😂
@WikWak2 жыл бұрын
Lookup how a wasted spark works. Thats the only way i ever got two sparks from 1 ht lead
@colbytyree25922 жыл бұрын
This is the REAL monster garage
@lucca83052 ай бұрын
this is top quality Garage 54 tuning
@voinopol2 жыл бұрын
Put it on o normal lada and see the difference on the road
@hectordeleon78592 жыл бұрын
I would love to see you guys do a draw through carburetor and turbo you would have massive gains from boosting more displacement. Just 10 psi would be safe and have a big impact
@anthonyborg58972 жыл бұрын
I love these guys, the creativity is top tier!
@Luisgarcia-tw6gw2 жыл бұрын
Now that I think about it, I have never seen an in-line 8-cylinder engine, it would be very interesting to see
@skylined55342 жыл бұрын
They were a thing many moons ago but probably not seen in cars since the 50s or even the 40s! I believe a lot of military and larger commercial vehicles used I8 engines up into the 70s though. Interesting idea, I'd love to see a straight 8 Lada!
@rosiehawtrey2 жыл бұрын
There's a reason for that, torsional rigidity or lack of it, plus the length of the thing, they were hard to package in an aero shell, eg the Tatra T77/87/600/603 use a V8 and even then they chose a RR drivetrain for aero, noise reduction and space.
@RevFyre2 жыл бұрын
Make a custom head gasket for the engine
@jetink6002 жыл бұрын
Super long unlikely suggestion: Inline 12 next and then v24 after that. Then you can run the motor through the cabin, no drive shaft, and put another lada cabin on top for the driver and passengers
@thehulkamaniabrother2.0892 жыл бұрын
They already did an inline 12 and 16
@jetink6002 жыл бұрын
@@thehulkamaniabrother2.089 that was 3 separate engines with 3 different crankshafts, heads, etc.
@tati-anaroseee43162 жыл бұрын
Basically a tank at that point 😂
@thehulkamaniabrother2.0892 жыл бұрын
@GABRIELLA no one cares dude
@thehulkamaniabrother2.0892 жыл бұрын
@@jetink600 I believe if you weld 3 crankshafts together it becomes one crankshaft...
@hotasianstepsister30392 жыл бұрын
Inline 8 would be hella fun!
@cedricnerger77952 жыл бұрын
what a awesome job you did, it only miss a adapted ignition system , and then you will be able to run a test beetween the stock 4cyl lada and the l6 G54 version . i do say 120hp for the l6 G54 !
@skdzgameplays20782 жыл бұрын
Need a bigger exhaust to get rid of exhaust gasses more efficiently, could be chokin power with the tiny lada exhaust
@pflaffik2 жыл бұрын
I disagree, bigger will not be significantly better before you reach high revs, even a classic Alfa Romeo twincam will run great on tiny exhaust until the revs get to about 6000-8000. For a Lada at max 4000 rpm the problem will never surface.
@saagarsatram2 жыл бұрын
Make a inline 8
@dieselgeezer182 жыл бұрын
yes
@type25232 жыл бұрын
In-line 7 :)
@renatinhodaheropuch26532 жыл бұрын
Lada com motor AP 1.6!!!!
@-A-Hybrid-Skunk-Productions-2 жыл бұрын
That's a whole Lada Beast. Nice. Well done Garage 54. Thanks for sharing.
@enzzofiliph86252 жыл бұрын
you should use a inline six distributor to solve the problem of intermittent combustion in the two extra cylinders
@kxlucifer2 жыл бұрын
Or go fuel tech hahaha and run some kind of cam with sensor..instead of distrubator cap and rotor
@ianduijsens2 жыл бұрын
Id love to see this engine get developed more like efi system better headgasket turbo? Put it in a drift car like a treu 2j and see how it goes
@Adam-nv9zo2 жыл бұрын
That thing looks so crazy!!!
@Ba11leFieldAce Жыл бұрын
Lada is 2jz. Lada is jeep. LADA IS CAR! Great video guys.
@theharbingerofconflation5 ай бұрын
Ah yes ,the well known '24 Lada Supra Driftcar. A tuners delight.
@jwalster94122 жыл бұрын
I wonder with the improved balance of the engine, if it might be worth making more sporty camshafts, I wonder if that would work.
@johncabot90582 жыл бұрын
weld 3 Lada engines together to make an inline 12, and extend the front of a Lada to fit the engine.
@panpajonk83932 жыл бұрын
they already did that
@daveyjahosaphat14282 жыл бұрын
Yup. Been there, done that.
@MarkLoves2Fly2 жыл бұрын
This video was a Lada fun to watch.
@ervronicle80264 ай бұрын
An inline 8 would be awesome to see!!
@dipdippotatochip91042 жыл бұрын
Please make a v8 using 2 lada engines, I’d die a happy man if i see you guys do that
@mrjed69122 жыл бұрын
a U8
@Mr_Meowingtons2 жыл бұрын
the problem with running the spark plugs like that your only going to get spark out of 1 other the other..
@tjabo2 жыл бұрын
yes point of less resistance
@ju-lenleow17592 жыл бұрын
Holy sheet, Suzuki Cappuccino in the house at @7:27!
@quittessa14092 жыл бұрын
An Inline-8 varient of this with the crankshaft of the addidional cylinders a quarter rotation offset would make for a better firing and balance
@mikachigi2 жыл бұрын
I waited a long time for this video, expecting to see it in a regular lada to see if it actually makes more power... I feel scammed
@KL_Stereo2 жыл бұрын
Yeah hope you get all of your money back, man.
@iofs33382 жыл бұрын
That is the most badass Lada!
@joshuacohn20042 жыл бұрын
Good job fellas!! You should make a engine Dynomonitor to measure your horsepower increase!!
@MintJoker9578 Жыл бұрын
Try cut at the cylinder 3 and another’s cylinder 2 so when merge should be a perfect 6 cylinders
@jaybarber682 жыл бұрын
I love in-line sixes! Now every Lada will want one!
@_..-.._..-.._ Жыл бұрын
This has a *_LADA_* potential.
@thatsgottahurt2 жыл бұрын
I want to see more of that "Drift54" car around the 7:45 minute mark
@sloganeeringgaming63634 ай бұрын
i love how it sounds like a lawn mower
@djcrownvic70172 жыл бұрын
@4:42 "I feel like it's got a LADA potential"
@JachuJustyDriver2 жыл бұрын
7:20 Suzuki Cappucino 😍
@Arnthorg2 жыл бұрын
you need to take a front wheel drived lada and put another engine in the back, make a 2 engine lada with awd
@rasputinputin81032 жыл бұрын
Используйте листовую медь для прокладки головки блока цилиндров. Use sheet copper for the head gasket.
@nova87472 жыл бұрын
Man, I hope one day they make some weird sort-of-V10 engine out of 4 Lada motors lmao.
@savosavic10892 жыл бұрын
why they didn't cut engines like this 1-2-3 2-3-4, I think that way would be much easier to connect two engine blocks
@americanmuscleup24979 ай бұрын
This dude does all types of bs I love it.😂 Cletus McFarland and boosted boys and this guy is world class grade A entertainment
@LIKEcommentANDsubscribe2 жыл бұрын
Now you need to make an inline 8
@daveyjahosaphat14282 жыл бұрын
They did. Also an inline 12. Look at the old videos. It was pretty awesome.
@wallbanger19682 жыл бұрын
This is apparently the only odd-fire 4 stroke inline 6. You have 2 cylinders fire simultaneously, then 2 more, then the other 2 fire by themselves. It's built more like a 4 cylinder welded to a popping John Deere.
@lakiza552 жыл бұрын
5:04 This part felt like a discount version of Redline rebuild from Hagerty lol
@jeffrykopis54682 жыл бұрын
You boys are very good at creating apocalyptic "Mad Max" cars! I could see Wez or Toady driving this 😆
@steve06806572 жыл бұрын
What a cool land crab! 🦀
@scubasteve062 жыл бұрын
Really needs a proper 6 cylinder distributor.
@rotax636nut57 ай бұрын
Well funny episode but you need a proper inline 6 crank to get even firing intervals then you can use an inline 6 distributor too so the engine will run properly
@1NIGHTMAREGAMER2 жыл бұрын
u can prolly throw truck suspension on it to pull wheels in so u don't have issue of hiting every thing u pass
@zahari_s_stoyanov2 жыл бұрын
The suspension is out of this world :3
@Kj16V Жыл бұрын
The piston firing order for that engine is nuts!
@nerdforfun43752 жыл бұрын
Now i think a turbo slapped on that LAD-JZ should give it some good umph... Next engine LAD-UZ 🤙🏼
@andreblanchard8315 Жыл бұрын
Watching this it looks like the 4 wheels are pointing in 4 different directions.😊
@adelaideautowashes2 жыл бұрын
I can't even get my project car's engine to start, and meanwhile these guys make a inline-6 with two engines, and it actually runs.
@alexmurray16392 жыл бұрын
Garage 54 Discovered : Rally Monster Blueprint!
@lilboi6302 жыл бұрын
sounds like a lawn mower, good stuff haha
@wiedietie2 жыл бұрын
4:41 'I feel it has a Lada potential'
@andregomes8352 Жыл бұрын
You should make two of these and turn them into a V12! :D
@jasonwhite87222 жыл бұрын
Build a apposed piston 4 cyl .by basically bolting two blocks together with out heads so both pistons almost meet each other. And porting the intake and exhaust through the side of the cylinder so the pistons are the valves.. Pulling in air threw one set with reed valves and a desil type fuel njection... .. So you end up with a 4 cylinder 8 piston 2 stroke.. May require turbo or supercharger to make it run
@Bit-while_going2 жыл бұрын
Snow tires and some pure coolant with no water added should do the trick. Maybe also a more powerful coolant pump.
@csanabria12752 жыл бұрын
I have been watching your videos for a long time now. I like how you guys built an in line 6 but for your next challenge should be an in line 8 with turbo. But I will make it as a two part video or more for us to enjoy it. Make it as perfect as you guys can as well as making the car look good with a proper tune up. Nothing too serious but good enough. On the front of the lada you should extend it with carbon fiber hand built parts like the hood and the fenders to make the engine looks like it belongs to the car and not just thrown in it. I will call this the project Lada Extended Edition V8, short name (Lada Ee V8). I hope you guys take my opinion. It will be a great and fun project. 😎
@itsyaboilarge57802 жыл бұрын
You should do a drag race between this lada and a stock lada to see the difference
@alezb926110 ай бұрын
Best channel on KZfaq
@Elmantukas2 жыл бұрын
Ladjz made into a v12 with an ebay turbo, delicious combo
@Seumu9902 жыл бұрын
Awesome job! 💪 Please convert that Carbon to EFI. Put some aftermarket ECU there 😁 Cooling and sealing fix then go the dyno. That would awesome two 😁😁😁
@jwilliams7032 жыл бұрын
Also you guys need to come to Oregon and do the Gambler 500 with us all some time. Im sure you could make some nuts ass cars.
@sheiladawg16642 жыл бұрын
Radiator needs a FAN!
@alep_sn95502 жыл бұрын
Would love to see this thing boosted
@Dionysor Жыл бұрын
everyone: just put a turbo or two in here garage: just weld 2 more cylinders onto it no problem you guys make the impossible possible. 👍❤️