As it is easy to remove the brake drum and always take off easily - make this lifhak and forget about the hammer, puller and other difficulties with the removal of the brake drum of the car.
This lifhak is useful to all owners of cars with a drum brake, especially if the brake drum is made of aluminum alloy, as it is with such drums that in due course there are difficulties with their removal. The most surprising thing is that the removal problem can not be solved even by professional SRT, judging by the video in KZfaq.
And the whole point is that the aluminum drum is mounted on a steel (iron) hub (semiaxis) - two different metals strongly pressed against each other, eventually cause the process of diffusion welding among themselves, which prevents the free removal of the drum with time. To prevent this from happening during the operation of the car, one simple action should be done, shown in the video - lifhak, which stops the diffusion welding of the drum and the hub - the lubrication of the flange with a grease, for example, such as Lithol-24. It is enough to do this one single time and you can forget about the problem of removing the brake drum! Brakes will not suffer in any way, if you do not apply too much lubricant and not there. How, where and how much to smear shown in the video.
Do it and do not suffer with the removal of brake drums from now on! All my driving career I use this method and always shot drums easily and simply - like in a video, which is what I wish for you!
Past video, filter for antisense: • ФИЛЬТР ДЛЯ ТОСОЛА - ла...
The following video shows how to remove / put the rear brake pads: • Как снять и поставить ...
Put on 👍, share this video with friends, 💗 🎃
add to favorites ❤ if you liked the video! 👏
Write your thoughts about the video in the comments! 👌
Subscribe to the channel! ✔ Will continue!ッ
/ @aleksey_goncharov_liv...
Channel: / @aleksey_goncharov_liv...
My first channel: / alexglechik
Video: • Как СНИМАТЬ ТОРМОЗНОЙ ...