How fast…

Рет қаралды 8,099

Ай бұрын

Coin Mining Central coinminingcentral.com/?ref=RPM use code RPM for $125 OFF! Trusted for over 5 years, competitive pricing, and secure and tracked delivery!
Parts and mods I used to cool down my Iceriver KS0 Pro and prepping for overclocking:
EZDIY 120mm 200CFM 4k RPM Fans geni.us/AHABOY4 (PAID LINK)
PCIE 6 pin to Molex for FAN power from server psu geni.us/QtPJWiu (PAID LINK)
6x6x5mm Copper Heatsinks for KS0 Pro geni.us/DM1JJAQ (PAID LINK)
Thermal Glue geni.us/6yAt4U (PAID LINK)
Arctic MX-6 Thermal Paste geni.us/L7Cu34X (PAID LINK)
VeteranMiner Barrel Plug Cable theveteranminer.com/product/b...
The Meter Box Kaspa Cooling Grills & Shroud www.themeterbox.com/r?id=v1mqh0
FOLLOW RedPandaMining
------------------------------------------
► Twitter - / redpandamining
► Instagram - / redpandamining
► Twitch - / redpandamining
► Reddit - / redpandamining
► Discord - / discord
► Website - RedPandaMining.com
Talk with ME 1 on 1
-------------------------------
redpandamining.shop
Crypto Mining Software I APPROVE
----------------------------------------------------------
HiveOS geni.us/xTTb
MERCH
------------
Cryptee www.cryptee.co/collections/re...
My Favorite Book - "The Bitcoin Standard": geni.us/NH5spNd
As an Amazon Associate, I earn from qualifying purchases.
Email for Business Inquiries ONLY - Contact@RedPandaMining.com
DISCLAIMER: Red Panda Mining is not a financial advisor nor an expert. This is not financial advice. Everything said in this video is an opinion. The statements in this video are not investment advice. This video is intended solely for educational and/or entertainment purposes only. Always do your own research before investing in Crypto Mining. Never invest more than you can afford to lose. Red Panda Mining is not responsible for your losses or gains as a result of buying, selling, trading, or mining cryptocurrencies.

Пікірлер: 49

@dderuy 12 күн бұрын

The sound of a thousand miners is the sound of heaven.

@GreaterGoodMining Ай бұрын

SPEED RUN! Thanks for the shout-out brotha! Nice work man that was fast, especially since you were still explaining everything as you went along! Another free mod you can do is move the internal fans to the outside for better airflow down the middle. I might take my fan off the heatsink, my chip temps were actually getting too cool. Might switch to push pull method to cool off the power stages more and let the chips warm up a bit. Ur da best Panda

@CowFoot Ай бұрын

Appriciate the Video - 2 question, what PSU are you using and is it quiet ?

@TenMinutesToMidnight1 Ай бұрын

Veteran Miner has an awesome video wherein he swaps the plug the a glorious 6-pin. Worth it as long as Kas stays up. Awesome video, Panda!

@Corbindallas34 Ай бұрын

can you list the heatsinks? I want to mod my KS0 pro, plus the pads

@fullyelectric Ай бұрын

@redpandamining dude this is one awesome 👏 video, i have watched so many others done the same but for some reason your video is to the point and seems like the best step by step next to GGM that is .. your rock brother ❤

@christianjohansen2349 Ай бұрын

I have one comm edition oc'ed to 280GH/s just with the side plates off not other mods running nice and cool, with a MSI 230W 19.5V psu barrel plug not even hot.

@wolverine1981pl Ай бұрын

could you pass link to psu ?

@greggarcia4943 Ай бұрын

I learn a lot in this video bro will the kso pro good for solo mining at home bro

@NicoleZhang-nz1qh Ай бұрын

Sure

@MyLibertyTV Ай бұрын

You should move the internal fans to the outside to make more room for airflow.

@americanmechanic909 Ай бұрын

15:43 I have two green KSO pro's, I plan to mod mine, you can move the case fans to the outside so the forced side plate air can move through easier.

@NicoleZhang-nz1qh Ай бұрын

Many of my customers have modified KS0

@DasPferd Ай бұрын

That Sound Damm can we get a Miner ASMR again :D

@chrisrigas Ай бұрын

Man, nice job. You've been an inspiration this past year. I now have 14 of these KS0 Pros setup on wire shelving in a room near a split unit quietly mining and minding their own business. Peace!

@MrSquid25 Ай бұрын

I have mine running anywhere from 300-320 GH on those cables. So far they're holding up good but I don't want to push beyond that. Also to help with the temps I pulled the small stock fans out and put them on the outside of the miner. Helps with airflow

@timiamcrypto2202 Ай бұрын

I purchased those same fans after you mentioned them on a previous video. Yes, they work great!

@archadious Ай бұрын

I do wonder about the self adhesive on the back of the heat sinks. I was informed that using actual thermal glue can save a few Cs in heat.

@thecanadianpunk-miner4life Ай бұрын

Blowing fan on barrel plug will NOT save the barrel plug still if using a server psu with overclocking! I melted a brand new barrel plug in less than 12hrs running 320 gig on it

@onlineoffgrid Ай бұрын

whats the daily profit if you oc this miner

@BlockchainBotanist Ай бұрын

Thanks for the video RPM. I have 15 of these to mod and have been putting it off for a while now. I think you motivated me to go ahead and get started modding my KSO Pro's! Very helpful video. 👍

@jefrycucu6604 Ай бұрын

You can use cctv 24v power supply 20 amps, the power supply can be adjust from 19.5v to 24v. I've run the ks0pro at 340ghs safely have a good temperature using a chase with 4pcs 90mm fan. San the body of the ks0pro use as heatsink

@Wurstsuppe100 Ай бұрын

My OC Setting is Clock Offset 300 MHz Voltage Offset 20 mV 320GH/s runs stable

@vertechFx Ай бұрын

What r those

@Bart230 Ай бұрын

Rather too much thermal paste, than too little. As long as it's not electrically conductive.

@danielelninoerrante8203 Ай бұрын

Can you share the pbfarmers firmware link?

@DontMindMeMining Ай бұрын

Great job, nice. lots of work for these little guys, lol

@user-ti7db1pm5y Ай бұрын

Enjoy your live .. thanks ❤

@MyLibertyTV Ай бұрын

120w at 12v and you are already at the 10Amp limit of the barrel port.

@MassBoost Ай бұрын

He knows that, but he's hoping with the fan blowing across the barrel jack/plug, that it will help keep it cool enough for it to not kill off the barrel jack when overclocked.

@Nerd8east Ай бұрын

If only the KS0 Pro and shroud were Panda Red. KS0 Pro KZfaqr Edition would have been awesome. Great video RPM.

@DennySuGaming Ай бұрын

tell me 12volts vs 19volts which one more stable?

@MyLibertyTV Ай бұрын

19v because you can can pull higher watts before you hit the maximum Amps the barrel port is rated for. Amps equals Watts divided by Volts. At 12v you max out the plug at only 120w. Overclocking you can easily exceed 170w.

@DennySuGaming Ай бұрын

@@MyLibertyTV yes true im using psu with 20v , but the specs work from 19-20v , if we go overclock with 12v , i think it would damage the board

@tpol6515 Ай бұрын

33GH is about 0.148$/day???

@caidrosiur5696 Ай бұрын

Jesus crist thoes asics are loud :O

@all4uminers587 Ай бұрын

Post #2 For every upgrade to a KS0 series, consider Solar as an option ❤

@amdhehe Ай бұрын

What are those shiny metal rectangles all over the hashboard?

@MacraDarkstar Ай бұрын

I think they are heat spreaders. I've opened a few units and some have odd holes in them, like they were cutoff scrap.

@m1j9s79 Ай бұрын

I dont understand the point of all these little fans vs one large fan connected to all the miners with ducting, there is no air filtration or sound suppression either. For this amount of work you could truly make something special. This is repetitive busy work. I feel like one large fan would use less electric as well, especially if you over engineered the large 😅fan and turned it down to 50-80%. Someone please educate me on the fallacy of my logic.

@all4uminers587 Ай бұрын

L❤VE you That’s a 🔥 waiting to happen Bro

@MyLibertyTV Ай бұрын

It’s the female barrel port that will melt.