How I built my light box w some links: • What light I use for c... • S3 E1 Building a BLED ... www.kaptainmyk... www.amazon.com... Light timmer: www.amazon.com...
Пікірлер: 44
@weasellyone2 Жыл бұрын
another informative video. That foil tape looks way way better then the crappy job I did. Trip to hardware store tomorrow.
@JC-dg6vo Жыл бұрын
Fun stuff. Something for the toolbox.
@TopComicsPressing Жыл бұрын
Thanks for watching
@michaelmayrend313 Жыл бұрын
I use tempered glass shelves/plates salvaged from paneled coffee tables, shelving units, and the glass doors from trashed entertainment centers. They let me dance the lights around the box, and the gaps are big enough to let the heat out. I use a cheap reflective emergency blanket to cover the setup. The glass panels also make great cold press plates.
@TopComicsPressing Жыл бұрын
Sounds live a solid system
@michaelmayrend313 Жыл бұрын
I also agree that the peroxide misting / light treatment drying effects stresses the paper, especially around spine splits, staples and tears. I put a small damp rag in the box to even out the humidity a little, without making the environment damp.
@TopComicsPressing Жыл бұрын
Nice tip
@michaelmayrend313 Жыл бұрын
@@TopComicsPressing We share with each other. Thank you for your videos and sharing information.
@jeffgarrett6898 Жыл бұрын
ThNks for the new look. Always looking to improve.
@TopComicsPressing Жыл бұрын
Always!
@thisweatherisbullshit Жыл бұрын
we're gonna need to see that wall of comics and your workspace.
@TopComicsPressing Жыл бұрын
Someday…
@RocCityComics Жыл бұрын
If you wanna reflect the blue light spectrum, the best thing to do would be to take some coarse grit sandpaper to the inside of the tub, then put a couple of coats of matte white paint on there...
@TopComicsPressing Жыл бұрын
Nope! This work just fine
@bobsmith1520 Жыл бұрын
sweet knowledge share my dude!
@TopComicsPressing Жыл бұрын
Welcome
@jaya076 Жыл бұрын
Nice job brother
@TopComicsPressing Жыл бұрын
Thanks for watching
@joshualittrell2457 Жыл бұрын
How do I become a Clint? I have a book I need cleaned pressed also there is some water damage not a ton and it’s only on the side of front and back cover. But I’m afraid to mess the book up because it is a AMS129
@TopComicsPressing Жыл бұрын
Shoot me a message on Facebook or Instagram or email at topcomicspressing@gmail.com
@murrayc9615 Жыл бұрын
Hi Joe, I am wondering if it was ME, Murray Clack, who may have suggested using the aluminum duct tape to line the light box? When I first got Kaptain Myke's book and saw he used aluminum foil to line the box, I knew that using the tape would be a better option. If it wasn't me who mentioned, then maybe it may have been Chris Bousquet who is also on Kaptain Myke's page, and he got the idea from me (Small world because it turns out that Chris and I just live a five minute drive from each other)
@TopComicsPressing Жыл бұрын
It could be. I looked through posts for a bit and could not find the original poster. But I am sure we will ID them. Chris is awesome
@mikehawkins5830 Жыл бұрын
Thanks, Joe. I checked Amazon, and the automatic/programmable light switches there didn’t look like what you showed. Would you possibly provide a link or at least the manufacturer of yours?
The gap is 4” cuz lights are 4.75” so there is enough for them to sit on
@hw50916 ай бұрын
so are using hydrogen peroxide, or is just the light sufficient?
@TopComicsPressing6 ай бұрын
Most of the time peroxide too
@hw50916 ай бұрын
for just a bit of edge yellowing, have you had any success without peroxide? I'm thinking of doing this with a video game manual, and they have finishes on them that I'd be skeptical to put peroxide on. The manual color is white and grey, with some light yellowing around the edge areas.@@TopComicsPressing
@TopComicsPressing6 ай бұрын
@@hw5091yes just light does work. Works best on slight yellowing due to plastic offgassing
@hw50916 ай бұрын
I Ordered the light, foil tape and am going to do this sometimes this week. I'll let you know the results. Even going from off white to light cream to just off white would be a big win here. I've got at least 10 of these manuals, and they are near minus to near mint outside of the color and hard to find white and near mint. @@TopComicsPressing
@hw50916 ай бұрын
thx. If I'm just trying the light, just got it in today, should I use a sheet of parchment paper or no?@@TopComicsPressing
@JFKlol Жыл бұрын
Hello, not sure if you read your comments on older videos but I will ask anyways. I saw in the comments some other guy asked about cards, so I figured maybe you would know. On manga, the top, side, and bottom of the book pages will be yellowed sometimes, especially on older volumes. Could this method work for manga?
@TopComicsPressing Жыл бұрын
I have not attempted. I would imagine so. I have whitened interior pages of comics. It is tedious to do every page though.
@JFKlol Жыл бұрын
@@TopComicsPressing Not really sure the word, but I am more talking about the exterior top of the book. Like this picture mangascout.com/wp-content/uploads/2021/09/prevention.jpg
@pingadol1555 Жыл бұрын
What kind of stains does it remove.
@TopComicsPressing Жыл бұрын
A lot - hit up my other KZfaq case studies or my Insta instagram.com/top_comics_pressing?igshid=YWJhMjlhZTc=
@naclteeballz856910 ай бұрын
My guy, can you send me some cracked cases?
@TopComicsPressing10 ай бұрын
Sure. Shoot me a message on Instagram or Facebook.
@djmoonchild01 Жыл бұрын
Can I commission you to try this on some vintage marvel cards from 1966? I have ones that we can sacrifice for testing first.
@TopComicsPressing Жыл бұрын
Sure - have not tried cards but they should work if you have a few testers. Can shoot me a dm on instagram or facebook
@djmoonchild01 Жыл бұрын
@@TopComicsPressing ok, ill hit you up on instagram, thanks a bunch, great work!✌️