How I Built This AMAZING 3D Printed FPV Wing? | ULTIMATE Build Guide and FLIGHT Coverage

Рет қаралды 14,160

Күн бұрын

STL Files: flightory.com/product/mini-pl...
----------------------------------------------------------------
INSTAGRAM ► / flightory_
Web page and Store ► flightory.com
Tech Group On Facebook ► / flightory
FACEBOOK ► / flightory.fb
----------------------------------------------------------------
Chapters
0:00 - 1:01 - Introduction
1:02 - 7:03 - Airframe Build
7:04 - 9:51 - Equipment
9:52 - 12:31 - Flights
----------------------------------------------------------------
Music track: Positive Experience by Aylex
Source: freetouse.com/music
Free Background Music for Video
_____________________________________
Music track: Start by Damtaro
Source: freetouse.com/music/
Royalty Free Background Music
_____________________________________
Music track: Utopia by ASHUTOSH
Source: freetouse.com/music/
Royalty Free Background Music
_____________________________________
Music track: Tropical Soul by Luke Bergs
Source: freetouse.com/music/
Royalty Free Background Music

Пікірлер: 29

@willssam2390 Жыл бұрын

I love this plane since ever the foam version. I built it almost exactly but I could not get the cg right

@robertgoldbornatyout 5 ай бұрын

Another great video. Thanks for sharing. Hope your weekend was great, our weather is finally warming up to be nicer flying weather. Have a great week.

@stevearodgers Жыл бұрын

Great build video!

@waldemarbiaek3549 Жыл бұрын

Dziękuję i pozdrawiam.

@andrewjamez Жыл бұрын

I only just discovered your website / aircraft. I will be purchasing. I just ordered my PLA-LW filament! Thankyou

@abdullahafzal9 Жыл бұрын

Hi...how are you getting the telemetry info on the controller....can you refer nay tutorial..that would help alot

@thefivewolves6949 Ай бұрын

will it hold a 155mm artillery round ?

@aleksmcwhinney6706 8 ай бұрын

how are you getting the mavlink telemetry on the controller?

@shourshot 3 ай бұрын

awesome! which fpv camera and antennae are you using?

@andrewjamez 11 ай бұрын

just a question, does the nose of your Stingray wing partially obstruct the view of the fpv camera?

@irvine40 7 ай бұрын

What size of print bed would this plane need? Would it print on a Prusa Mini?

@G-ronnytravelvlogs 3 ай бұрын

What's the max distance

@h1ghf1ve Жыл бұрын

Hi, first of all good job and nice work. But i got one concern, what about the thin Layers of PLA on the wings if the sun ist shining and its a lil hotter? I mean PLA deforms quite fast in the sun.

@mrantssfpv Жыл бұрын

If it’s heat you’re worried about go fast, the airflow the wing experiences is far more efficient at cooling than most cooling systems.

@tuttuti123 6 ай бұрын

you should've been more concerned about the ESC heating instead of the sun. But like all flying things go, they experience good cooling. That's why ESCs for flying stuffs can go rated up to 50A without ever coming with a heatsink and 4 of them in a board, and if you look at ground crawlers ESC they all come with some cooling even with the smaller amp rated ones. Looking at this guy's design, there's a whole lot of ducting going on so you don't have to worry about internals heating up either.

@user-hi4xk1bs2o 6 ай бұрын

@@tuttuti1233 REPLIES

@poohaty 5 сағат бұрын

Fajne miejsce do latania. W tle Babia Gora?

@FLIGHTORY 4 сағат бұрын

@@poohaty dokładnie tak 👏

@jessejj975 Ай бұрын

What size printer you need to make this? Interested to buy if I can easily make it with 200mm x 200mm x 200mm printer capability.

@FLIGHTORY Ай бұрын

At least 220x220x240mm but you can do it with your printer as well. Most elements can be printed; it might be necessary to split one of the wing segments into two pieces.