You should do a series where you recreate real world interchanges and then fix them for in game use.

That's actually stunning. At this rate it's more like a piece of art than just a system interchange. Great job!

Sure the 176.9 deg spec is emotionally devastating . But damn that is one sexy intersection build. Great job Yumbl !

Maintaining the interchange as just a two-level stack is amazing.

7x7 loop for a 45degree connection......gems that I watch your construction videos for. You come up with keepers all the time, the Pretty AND Practical.

There are multiple cloverleafs near me and they all have short traffic weave sections... this would be so much less stressful to drive through! Also it looks really nice, well done!

The one thing I see that a standard cloverleaf does that this doesn't: going back the way you came. Standard cloverleaf, you can do two loops and go from northbound to westbound to southbound. This format doesn't let you do that as is. You go northbound to westbound, and then you leave the intersection. Other than that, great design.

I've been watching this Playlist with the idea In the back of my head "how can we fix the cloverleaf to eliminate the weave, and yet still not require a traffic light, roundabout, or a fourth level?" And by Jove you have done it. I hope some highway engineers see this. I would love to see this in real life. The previous double trumpet came close, but the cross highway ends up offset. You'd have to curve the ends of the highway to bring them back in line. This is a more elegant solution, if potentially more expensive. I'll add that it's got to be possible to put all four of the diagonals at ground level, even if that means stacking the highways on a third level.

This is beautiful. My only problem is that there is no way to do a U-turn. I know that the vehicles in Cities Skylines never make mistakes and will never find themselves missing an exit, so it's not really a problem in the game. But in real life, human error is real and sometimes people need a way to turn around.

no weave, and no turning back. lol I love it! ** note that you could technically do laps on a cloverleaf but not with this one, so you have to choose the intended behavior when deciding on this vs the original ** ...but this is a cool solution if you don't want people turning around

My DUDE!!!! this is magnificent! I implemented this in a problem area of my city. It took my traffic from 46% up to 67%. I have not seen back ups in this location since. Amazing job on this build.

New Or-le-an-s. The intersection you reference is N Causeway Blvd and Interstate 10. And it is a big improvement over the normal Cloverleaf that was there before the modification.

I like your solution! Your footprint is smaller than mine, and it looks much prettier, too… to make a no-weave cloverleaf, what I’ve done in the past is have my left turns merge from the left instead of looping around and merging from the right. Describing this in text is difficult… instead of passing under/over the road I will eventually merge with and circling around and merging from the right side, my merge lanes rise up between the two straight-thru lanes and merge from the left side. To pull this off, the four straight-thru lanes need to diverge, creating a fairly large box in the middle, and giving room for the merge lanes in the center. Thus the huge footprint. Another variation I tried was putting the clover leaves inside the straight-thru lanes. It was ugly as heck and super finicky to build… but I also wasn’t using sufficient mods. I could probably do a better job now, but there are also better/easier solutions. Not that there is any advantage to it, but when you insist (as I often do) that left turns merge from the left, you start getting some really odd configurations which can be really fun to build. (And are not at all real world solutions - but this is a video game.)

The only benefit that I miss from traditional cloverleaf is the ability to make u-turns, in almost every interesection. On my cities I usually solve this with a "hanged horseshoe" u-turn, right after the intersection. Also, for this amazing cloverleaf, I have a suggestion: "The 88 Cloverleaf" or "The Eighties"

nice vid. very clearly explained. ONE thing missing. - the ability to go back the other way. Here's how you do it: Where one of the four loops is joining the other highway UNDER the overpass, create a lane on the right, before the highway merge, that runs parallel to the highway and connects to the other loop which goes back up and over. -this is not a weave. Where one of the four loops is joining the other highway using the OVERPASS, create an ELEVATED lane on the right, before the highway merge, that runs parallel to the highway and connects to the other elevated loop which goes down and under. yes, it will make it possible to infinitely drive over the loops. but with lane control you can prevent that. this new lane stays on the outer side of any loop - and gets pushed into the next highway.

Remember kids, 7x7 is the perfect angle! Great job as always.

Mind Blowing! Simply the best interchange I have ever seen and yet another superb tutorial. Keep up the great content.

Cool video and design -- I just disagree a bit with your lane math, I think there should be at least 2 through lanes on each highway. The cloverleaf is already taking up a lot of space, so two 3-lane highway bridges won't change much. I've never seen a highway interchange with only 1 through lane IRL unless it was under construction, so it would have to be a very unique traffic flow situation for that to work permanently. I know it's just a simulation game and I'm being picky though. PS: Could you make a video showing us landscaping & grading an interchange? That would be really cool to watch!

This is hilarious, I was JUST thinking about how you could fix the cloverleaf by removing the weave hahaha

Thank you for the workshop add! I only get to play a couple hours a week so I love being able to add your beautiful creations

You come up with the most creative and interesting interchanges. It's always great to watch

Watching the interchange during the introduction was like watching a highly satisfying video. Thank you for that.

Great idea! This is also essentially the same interchange as the one on I-395 with Virginia Route 7 (King Street) in Alexandria. I've always thought it was a design idea that could be used all over the place.

Looking at this my question is "in real life would this be cheaper to build then a flyover interchange" and at a glance I think it would be. And better yet it can replace existing clover leaf interchanges that are ment to be the cheapest highway intersection as far as I can tell, so it would be a great "upgrade" design.

This still brings me a lot of joy. Just to how flowy and well it just works. Love this

7x7 creating a 45 degree angle, this is that dorky kinda stuff I live for and love seeing in your videos

I almost exclusively use his interchanges in my cities, usually the first thing I do in a map is go in and change those that lead into the city itself, then others along the way. They are not only efficient but absolutely beautiful too. Now I just need to make one while watching his videos.

This is a remarkable and beautiful design, and probably works much better than the standard clover. I noticed that the loops are not really needed anymore, those could be built as left curves as well. But looping around definitely reduces the slope needed to overcome the height difference. Good work Yumbl, thumbs up.

That's an amazing interchange. Though I suspect leaving only one straight lane limits throughput, maybe adding more straight lane solves it, but in real life it definately cost more to build. Anyway, that looks gorgeous.

This is great. I'd love to see you tackle junctions for other types of transit, or mixed transit.

The one critique I have for most of your interchanges is that while you're very space efficient as far as that goes, the right hand turn slip lanes would probably not be the greatest to drive on in real life because there's a whole bunch of turning back and forth. IRL, I'd take the hit to the overall footprint to get a single large-radius right hand turn rather than the right-left-right-left-right you get for "shrink wrapping" the slip lanes around the left hand loops.

Absolutely gorgeous, love it! You really make this stuff into an art form~

regarding shape what came to mind was interleaved fish hooks. Great work, smooth.

Absolutely amazing! I can't wait to build and use it! Fantastic job!

Thank you!! I made this on ps4 and it’s amazing how much traffic it can handle. Hats off to you sir

This is incredible. It's like a reshaped turbine, but with 2 fewer overpasses. Fantastic!

Lovely interchange and tutorial once again Yumble. I’ve managed to replicate your double trumpet interchange on vanilla (console) to great effect - may be a challenge to try the no-weave cloverleaf without mods but perhaps I’ll give it a go soon.

I’ve seen one partially using this on Google Maps, it’s in the New Orleans area

Un-be-weavable!

Very neat looking. IRL the other issues with Cloverleafs are the small radii of the loops allowing for only slow speeds/velocities.

Earned yourself a sub with this one . Enjoyed it thoroughly, learned too. 👍🏾👍🏾👍🏾👍🏾

Very very nice video! Thank you so much for sharing your secret tips!

I think this is a beautiful and clean solution, well done and thank you!

Love this. Thanks for doing this.

Great intersection!. If you're looking for a name, I suggest the "Ess-Clover" highway interchange.

There's a real life version of this intersection just east of Frankfurt am Main airport in Germany (Frankfurter Kreuz, crossing between Autobahn 3 and Autobahn 5). It's simplified in the sense that it looks like a regular cloverleaf, but with sliproads to prevent weaving. Pretty interesting design!

that really is beautiful - well done mate.

Ingenious. Well done!

I dont know how I ended here but this was super nice video! I may even try the game

This looks AMAZING!!!! Thanks for making a share file!

I'm from New Orleans, so the thumbnail definitely caught my attention! Great build

It's stunning! Now, all I wonder about, can I make this while playing vanilla (without the painting of course)? This I need to try out as soon as I have time to play on my PS4. Thank you for the wonderful video and new inspiration!

Cool one. Basically, for interlaced trumpets. Really, really cool.

Am I the only super nerd who would like to see a full start to finish build? No extra commentary needed although more of your soothing voice is always appreciated.

You tickled my OCD in just the right ways. Thank you

Beautiful, nicely done! 👍

now that's a smart solution... a real beauty. great job.

You make this look so easy, I tried it and yeah, didn’t quite work out as well. But I’ll keep trying.

I love your explanation of all your intersections. . . Realy! I would rather to straighten the right lane.

Here in California most freeways add 1-2 lanes before an interchange, so that the number of straight through lanes doesn't go down or goes down only a little bit. So if you need more straight through bandwidth you could expand the approaching segments to 4 or even 5 lane highway, and that would let you keep the straight through part at 2 or 3 instead of going down to 1.

"The shape is hard to explain unless you have seen what it looks like" he says, sounding like a half-mad investigator in the Cthulhu mythos. Yumbl. R'lyeh's city planner.

Sitting here in my Little House, watching a guy absolutely nailing commen modern traffic issues! I wonder if that would come to My city? #littlehouse #benton

I came across this one a few months ago, some couple of years old workshop item (I think it was "2021 No Weave Cloverleaf Interchange") and have since been using that quite a bit. Really handy, I also tend to use the 7 as the radius of the 'inner loops' as the game then gives me 8 nodes per 360 degrees instead of the four per 360 degrees you get when the radius is 6. Which makes the rest of the setup easier for me as I don't need to juggle with nodes.

this should be added as an option on the pre-made interchanges in the game :) so beautiful

I know absolutely nothing about interchange design, but one thing I notice in this is that going into the interchange (i.e. not going straight, but taking the right lane off), there is a very tight curve along the outside edge. In real life, this would probably be problematic, especially having just veered right to enter the ramp and then having to go into a sharp curve in the opposite direction immediately after. I am picturing encountering this interchange for the first time and not paying attention to the SLOW - 25MPH! signs and sliding into the railing halfway through. I think this could be greatly mitigated by straightening out the onramps instead of following the contours of the cloverleafs. The result would be less aesthetically pleasing (it would basically be a cloverleaf inside a diamond) but would be much easier to navigate and as a result, much safer.

Awesome intricate design! Must've taken a while to work out!

This is a beautiful interchange. Honestly it's quote stunning. This should be a standard interchange in a just world. I'm not sure I like the idea of reducing through traffic to one lane right after the exit. I feel like that would be a bottleneck

It is amazing! There are some places where it would be very handy in RL too.

This is really, really, really good!

Submit those to various local governments in China maybe. That country seems to have a bottomless supply of infrastructure money and a lot of planned highways to be built. If this design can reduce traffic accidents by removing weaves, they will likely put some in.

That looks so bizarre, but so beautiful, too... I love this so much! Damn this is pretty.

That´s so relaxing to watch...

great job dude, really clever

Wow that was definitely a work of art!

This is the same idea as I-10 at Causeway Blvd in New Orleans LA. Cloverleaf was generally bad not just because of its weaving issue this video solves. It also causes a speed reduction for turning movements in system interchange which this configuration cannot solve. A lot of cloverleaf interchange built in last century were actually for busy arterial access, which doesn't really need a full interchange capacity-wise. So when those were reconstructed, they were turned into Parclo or DDI which is just enough to serve the demand and safer. For system interchange between two freeways that were built as cloverleaf in the past, there loop ramps were usually replaced by flyover ramps which mitigates both weaving and speed reduction issues when the bridges at the interchange are due for replacement. Cloverleaf interchange requires least bridges by taking a lot of space, so it is not hard to fit any new configuration without acquiring additional Right-of-way. That's why this kind of practice doesn't exist a lot as a solution for traditional cloverleaf interchange.

This is the most German interchange I’ve seen in cities yet! Yumbl can u do the Spparclo ab4 out of Fargo, North Dakota pleaaase? 😭 I wanna put some yumbl approved timings on mine. Almost beats your spparclo b4!

Not a CE but what sticks out to me are the roads that "hug" the cloverleaf loops. You're introducing an "S" bend that isn't great for traffic, or at least that's what CEs have told me in the past when I was drawing up plans for streets and parking lots. I feel those four strips should instead be large curves that don't hug the cloverleaf loops but instead just kind of "kiss" them at a tangent. (edit) having said that though, I think that's the only issue with this intersection. It looks great.

That parallel road connections technique just blew my freaking mind.

That looks epic. bravo

Have you tried a slowverleaf yet? It’s when you throw your leafs on feeders then throw a timed traffic light on the node where the leafs and feeder meet. Mainly for collision reduction

Watching you create these interchanges gives me my OCD fix, Lol.

lol... "teaching you how to make it." I'm here waiting to see it on steam. Great job Yumbl as always.

Amazing stuff!

Amazing! On a practical note I wonder how this compares to a stack interchange in terms of cost and throughput

Fun fact, this is similar to the design in use at I-10 and Causeway in Metairie, Louisiana. It has some weaving on the interstate level, but not on the Causeway level. It's a really weird interchange though. It has a bunch of extra ramps and a weird left entrance flyover ramp

I've been working out something similar in my head...nice solution.

Another great video.

I just completed this on Xbox Series X 😮 I’m so excited to see them zoom around!

This is quite beautifulan I might try to use it myself. The one thing a standard cloverleaf has over this is the u-turn. I still despise it though.

Beautiful!

I'm in love with this interchange. that's it.

As someone who grew up in the NOLA area, I'm ashamed to admit I had to look at google maps. To be fair, my family never needed to get on causeway from I-10, or vice versa. In general, though, New Orleans and the Northshore (and the Baton Rouge area) offers a lot of examples of the good, the bad, and the ugly of interchanges. Just to the south of I-10 and Causeway, you have I-10 and Airline Highway (US 61), which has an elevated roundabout. Then you have I-10 and US 90 (its right by the Superdome), which is absolute spaghetti (actually, the entire Ponchartrain Expressway is spaghetti, but its really bad at that interchange). I-610 has multiple exits with incredibly short spacing that just lead into suburban areas. I-310 and I-10 looks like a normal T interchange like you'd plop in game, until you actually drive it, and realize those ramps are absurdly high up. Then you have I-12, which has a lot of good, simple diamond interchanges with local rural roads. I-12 and LA 434 is a good example, as is I-12 and LA 3158. I-12 and US 51 Business has a dumbbell interchange, and I-12 and US 61 has a textbook perfect cloverleaf. The only really bad interchange I can speak of is I-12 and I-55, and that's just because they made it so damned compact that merging from a ramp is difficult in all but the lightest traffic. Also, all the locals pronounce it New "Or-lens". Except for the parish (i.e., county), which is "Or-leans" Parish. "N'awlins" is just some kitschy tourist stuff.

Wouldn't the largest downside to this design in a real world application be the single lane straight traffic? Some vehicles that travel on freeways go very slowly, and regular passenger drivers might want to pass them.

WOW, that´s pretty impressive interchange.

Hey man, i really enjoy your videos and they're really healping me! Just one question: your buses stop at the bus stop for to long as mine? My buses (idk why) they stop to take the passangers in the middle of the street and they keep stoped for like 5-7 seconds, and with time, the traffic turns into a nightmare just because of the buses!

Really awesome! Dare I ask if you will post to the workshop??

We actually have an intersection that partially uses this system here. With the addition, that the „wave“ road temporarily joins the main road it passes before the 270º, which allows turning around

amazing interchange, i was surprised

There is a much, MUCH simplier solution to dealing with the weave. While it doesn't fix the capacity issue, it does improve safety tremendously. The textbook method is to have the weave take place on a collector/distributor road, at lower speeds and without interference from through traffic. A recently invented poor-man's version involves adding a buffer lane between the through lanes and the loop lane, essentially performing the same function as a collector/distributor road. Minneapolis has several instances of this design. If you look up "buffer auxiliary lane" you will find a 2021 paper on it summarizing safety outcomes from implementations in Minnesota. Not much else; the design is fairly new and not very famous.

Absolutely genius ! Only a shame that it needs 2 more bridges than the original clover leaf. Otherwise this would be the find of a lifetime for in the real world.. The advantage of a clover leaf is exactly that. Big capacity but cheap to build. But with this rather nasty disadvantage of the weaving. But if a cloverleaf needs 2 extra bridges I think in the real world we actually have better solutions for that price.. But this was amazing I must give you that!!