How I get SMOOTH 3D Prints | EASY Slicer Settings You've Been Wanting!

Рет қаралды 47,283

Ай бұрын

You've been asking and It's finally here! The settings I've been using in my 3D Printing slicing programs! These little tweaks have helped me adjust the quality of my prints! Hopefully this video helps you learn more about the program! Goodluck!
▼ MENTIONED IN VIDEO
Orca Sliver Tutorial - • The BEST New 3D Printi...
Devil Fruit - • 3D Printing LIFE SIZE ...
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitch | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
My Etsy | www.etsy.com/shop/FranklyBuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
ELEGOO| tinyurl.com/yvf6v6cm
☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
Disclaimer- This video is NOT sponsored by any brands mentioned in this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
▼TIME STAMPS
0:00- Intro

#3dprinting #tutorial #settings

Пікірлер: 155

@justinmurphy2227 17 күн бұрын

I have a Bambu P1S. I've only been printing for a little over 3 months and this machine, and Bambu Studio, makes me look like I've been at it for years! The only things I adjust are the walls, infill %, and speed. Now when I change to ABS or PETG i adjust temps after doing a temp tower but that is it. I've used auto supports and it's never let me down. I also have the A1 Mini and it's speed is crazy. I use it for actually making bulk items like Ikea Skadis parts. Simply because I can print them so fast and still with amazing quality. Thank you for this video. If anything, it reassured me that there isn't settings that I'm missing out on!

@Banished_Builds Ай бұрын

It's crazy to think how far we've come when it comes to print quality. You used to have to have specific settings for basically each one of your printers but now you can just slice and send without tuning at all on many printers.

@bringtherain94 Ай бұрын

We are in the golden age of 3d printers. I absolutely love my P1S as it blows me away every single print.

@Xominus Ай бұрын

I literally am about to get my first 3D printer in a couple days and heard about your opinion on Orca so I hope you'd get a settings video out on it and here it is, perfect timing. Thank you!!

@L0NGH0RNS77 Ай бұрын

My man. I’ve been waiting for this. Thank you!

@darkalleywaystudio3975 Ай бұрын

Been modeling for a long time now but 3d printing is still new to me. This video helped me a ton! Great work 👍

@daverussell27 Ай бұрын

Thanks Frank another good bit of info on orca 👍👍👍

@obi1-kanblowmi577 Ай бұрын

Just got my P1S! Cant wait to start printing cosplay pieces! Your channel is a godsend for someone like me that’s new to 3D printing 🙏

@collinkelly2402 Ай бұрын

Im such a fan of these types of videos. when I got a 3d printer, just to goof around with, I had friends aske me if I could make some stuff for them. started off as small things like stands, or some organizers. After a year Its turned into props, some art idea, hell even some marketing things for a few friends business. When I wonder if something is do-able, I just wander over to this channel and see what I can learn, between that and a few buddies who as run a printer or two, we figure it out. Thanks for the education, I feel like when I come here, I dont just learn what to do, but why you do it in a particular way, and knowing why is about 90% of whats important.

@elivelazquez7538 Ай бұрын

As a noob... I NEEDED THIS! Much appreciated Frank!!!

@TheAsianSauce26 Ай бұрын

Hey Frank just wanted to let you know how much I love your videos and to thank you for getting me into this hobby and inspiring me to build my own iron man suit keep up the amazing work and awesome vids

@kojiikinns Ай бұрын

As someone who is brand new to printing this was a big help. I’m in the works on a dark magician cosplay and currently printing the staff. I printed out the orb part of the staff today and my idea was to use it as a mold for clear Worbla. Thinking that it would be see-through for LED’s. Then I saw your video about making them transparent and it surely stopped me in my tracks. literally screamed….YOU CAN MAKE THEM TRANSPARENT!?!?😓 You’re sooo helpful and I really enjoy your videos.

@mac2cool93 Ай бұрын

As always great information brother!!! Love your content and will always share your thoughts and opinions with someone getting into the hobby!

@pngotin08 Ай бұрын

Great tutorial. Thanks

@brendandawes9227 Ай бұрын

With my bambu P1S the profiles are usually very good but also good to see what you do 😊 Some new filaments I also do a calibration/new profile depending on filament e.g. Overture matte or eSun HS-PLA. Will have a look at Sunlu next, you get really good results from it 😊

@JustGee3D Ай бұрын

Just got my X1C and its crazy how the print quality is at those speeds!!! GREAT VIDEO. 🔥🔥

@parzi_wolf Ай бұрын

Can't wait to see the solo leveling dagger video I really wanna make those myself

@ramim.5856 Ай бұрын

Just discovered the channel it's really good to subscribed! I love to see printing comparison specially in 2024! have a great day!

@that_benji Ай бұрын

Started on a Anycubic Kossel back in 2016, and after a few different printers bought a P1S. I've been absolutely blown away by the quality and speed this current generation of printers has to offer. Hope to see a full Halo suit, I'm just about finished with mine!

@vincentkufudakes1043 Ай бұрын

10 minutes into the video, I'm like, "I'd love to see you print some of the daggers from Solo Leveling", cause i just pulled my first one off the build plate, and damn, you did not disappoint!!

@HenryBiernat Ай бұрын

That’s pretty useful❤

@deadlyapollo Ай бұрын

Apart of my "no sand 2024" setup, Ive been using the following: Proper orientation .16 LH Adaptive layers Outer to inner wall sequence Organic supports That's it. I've not had to sand any of my prints on both the bambu's and the Neptunes. Prime and paint and I'm all done.

@dakonx7049 Ай бұрын

What about speeds? Standard?

@BinaryHe1ix Ай бұрын

I've been using the 0.08 height on my P1S with otherwise default settings and the quality has been stunning. Did a test paint job on one of the pieces and with a single coat of filler primer and paint the end result is fantastic. Been trying to avoid having rounded edges on the top layers of the print because they end up leaving massive layer lines, but other than that it's pretty much spot on.

@deadlyapollo Ай бұрын

@@dakonx7049 standard X1C/A1 speeds for the Bambu 250mm for the Neptune 4 max

@dakonx7049 Ай бұрын

@@deadlyapollo alr alr, i got a p1 so ill give it a try, thanks

@raymondgomez8687 24 күн бұрын

@@BinaryHe1ixwhat kind of things are you printing? Props? I’m trying to see if upping the quality would help with sanding less for things like helmets and masks, etc

@bigblue1287 Ай бұрын

Frank I remember the day when you would say, Figure it out for yourself LOL. Love the vlogs

@LunaticOPeter Ай бұрын

hey Frank, i'm a fan, wanted to give you a tip on scaling helmets: on blender i took 2 photos of my face, front and side, put them on blender with a uv sphere, and adjust the vertices, so far y made one in 30min-ish. rating 5-6/10, but it will give you an idea of the shape of your head

@pennplayz Ай бұрын

Just got a refurbished Anycubic Kobra 2 Neo, still figuring out settings but I’m enjoying the hobby so far!

@Lotus_Airsoft Ай бұрын

Master chief Helmet tutorial please!!! !Love the vids!

@theredrage9433 Ай бұрын

Just bought a K1 max AI , can't wait to start printing.

@nitzerebbhead 28 күн бұрын

In Bambu Studio, I've changed to Arachne vs Classic and wall generation to inner/outer/inner. To get your supports to release a little better you can experiment with the Z distance for supports. I increase it from .2 to between .25 and .27 as I print a lot of PETG, ABS, and nylon. Another tip is that if you can't orient your print optimally, use the cut function to separate it into sections that can be oriented better to optimize quality. MEK can be used to chemically melt PETG, ASA, ABS, and styrene creating a permanent bond unlike CA glue. It can even fix areas where there may be some layer adhesion issues. Since I post process and paint most parts I print, the glue lines are filled and smoothed.

@sandrolauer350 Ай бұрын

Good video! The matte PLA.... order some and print with'em. You can see every layer line and every little print defect! Although the look is gorgeous! You gave the right explanation for the silk filaments hiding layerlines, but for matte you mixed stuff up. The matte PLA does not reflect very much light, so the reason silk is hiding stuff is the same reason matte isn't. Keep on doing these great content!

@YouBetterCallSaul Ай бұрын

That’s weird bc the elegoo matte PLA I use hides later lines fantastically.

@ninjacats200 18 сағат бұрын

I've been having problems with my Ender 3 v2. I keep having prints come off the plate when it gets near the end. Idk why I didn't realize the thing about the bed slinging front and back. So I slowed my current print which is halfway done. Down to 75%. Hope that is slow enough for the rest of the print. When it gets taller I might slow it down to 50%. Trying to print off some armor from the house of the Dragons for ren fair. Its the king's guard armor. It looks so sick. Trying to print the arm pieces. I split it in two to print on the ender 3. The first part failed near the end. So I'm trying part two right now. If part two comes out fine. I'll try part one again with the same speed changes.

@rjtopper68 Ай бұрын

Great video. Just wish I watched it before I printed my Clone Trooper helmet. I printed the back two quarters standing up at the same time. The print head knocked them loose and they fell to the floor at 98%. Obviously (as you said), I should have slowed down the print towards the top (bed slinging Prusa Mk4). As I contemplated reprinting them differently, I realized I could just slice off the part that was missed, print that and just glue it onto already printed part. I did that and it worked great. Hardly noticeable after the finishing work. Will look into these tips next print. Thank you!

@YTEnderLIVE Ай бұрын

Frankly the goat saving our life once again

@flixthedev Ай бұрын

W frankly built. You encouraged me to buy ANOTHER printer!

@treborrrrr Ай бұрын

I remember the "good" old days when I first started with 3d printing about 12-13 years ago. Slicing something would take absolute aaages. It wasn't uncommon for me to have to wait 15-20 minutes for a single model. So you really wanted to make sure you had every setting nailed or you'd be wasting a ton of time just because you messed something up. Slicers today are just amazing by comparison.

@TheForgeGa Ай бұрын

I love 3d printing, and I’m a huge fan of what you do. Your videos walked me through my iron man helmet and continue to help me with all kinds of stuff. I have a question though, do you use other people’s files for everything or do you design it yourself?

@brendandawes9227 Ай бұрын

Smooooth...just like a silka!

@Drakanis25 Ай бұрын

What brand of filament is your go to? Do you prefer different brands for like silk vs regular pla for example?

@AtlasResale Ай бұрын

Was the Cura Mew set to 20.5 % infill compared to the Orca Mew at 5% that would create a difference in print time, or am i not seeing it correctly ?

@astrophysicistguy Ай бұрын

Print orientation is such a big deal in getting high quality prints. My new PRUSA XL print quality is just amazing and I've have. PRUSA Mark 3 i3S for the last 3 years. I know its kinda outrageously expensive but seeing it do a multi filament print with no waste and near instant filament changes is amazing

@raymondgomez8687 24 күн бұрын

Hey frank! I love your videos and I finally came around to getting some stuff printed and I’m loving it! I just wanted to ask if you remember what the qualities were that you printed those last two armor looks my pieces at? Thanks!

@anthonylong5870 27 күн бұрын

Anything that is tall and standing on my Bambu gets ringing. Bambu's LOVE to ring on prints.....

@rosssmith5731 Ай бұрын

Ive just ordered a K1 Max, funny enough i run your pri t settings on my Ender 3 Max for cosplay helmets. (Works Great). Do you have specific settings for Helmets or just run standard settings and adjust the infill? Any info would be great to get before taking delivery.

@shashanktg08 Ай бұрын

Only problem to use orca is nozzel change when change nozzle to 0.6 the parameters still reamins of 0.4

@QwertyZ70 Ай бұрын

My Ender 3 v2 neo printer has been acting up for some time even though it's fairly new, but just a couple weeks ago, it completely stopped moving. Is there anything I can do to fix this?

@dylanmenzel762 Ай бұрын

Great video! I absolutely need to know where you got that Solo Leveling STL!

@Safari95 Ай бұрын

I been using my CR10-V2 and I'm still impressed with it. I do want to get a core X Y printer to test how fast I can get a helmet done.

@jediboy5172 Ай бұрын

I printed the parts for a mk 42 iron man helmet. I was just wondering if you knew which crashworks motorization kit would be best for it.

@andrewdaniel3565 Ай бұрын

I keep getting my silk pla stuck in my K1 max it's like it gets stuck in the Ptfe tube on the bottom or the extruder, how could I fix that?

@TheAthens619 Ай бұрын

Just wandering... how long and how much filament would it take to scan and print one of your dogs on your new printer? Just a thought.

@3dprintingstuffiguess Ай бұрын

Let's goooooo! Halo!

@onsab123 Ай бұрын

Hey Frank. Shot in the dark but, I have a JGmaker magic and have issues with using it. Upgrades and settings are hard to find, could I use ender 3 guides to help my prints? Tried upgrading to a glass plate and since then can't get my prints to stick or finish completely. Great video.

@kamerontranter1169 Ай бұрын

Hey very interested on your opinion if i wanted to do a whole master chief outfit eould a creality k1 max be fine to do it all i kniw there bigger printers but space is a factor for myself at the moment any advice be much appreciated and Keep on print grinding

@Zukes454 15 күн бұрын

do you still use z hop feature in orca? If so what settings do you have it set to?

@ianisgg8604 Ай бұрын

Hi Frank you have been my inspiration for about 3 years and now I wanna buy my first 3d printer for helmets props maybe some smaller things idk and I was thinking about the Elegoo neptune 4 plus but now I saw the new ender 3 V3 and idk which one is better could you please tell me or if you know another one in that price range please let me know because I want to buy it this month.❤

@Prime_Gamer10 Ай бұрын

I've recently started using Orca slicer for my K1, and for whatever reason the prints will often stop extruding before it finishes the first layer. This has only been happening with the Orca slicer, and it seems to work with Creality Print just fine. However, I wanna use Orca since it can provide much better quality than Creality Print. I tried to research solutions to my issue, but there was almost nothing about it. I tried switching from the standard brass 0.4mm nozzle to a steel 0.6mm nozzle, and that seemed to work for awhile. But now my prints are continuing to fail. I was wondering if you had experienced this issue and know how to solve it, or just had any recommendations on what I should do about it.

@markbernard8312 Ай бұрын

I brought my first printer 3 weeks ago it hasnt stopped since

@melvinmartinez5144 Ай бұрын

Hey Frank, you were the biggest influence on my decision choice when purchasing my first 3D Printer. I chose the Neptune 3 Max for my first printer…funny thing happened once I got my printer. Elegoo launched the Neptune 4 Max shortly after I got mine. I had a huge print volume, then after getting an Ender 3 V2, and a Voxelab Aquila with is just an Ender 3 V2 clone, I went for speed. I got a FLSUN V400. Which is why I’m making this comment…you didn’t mention Delta style. I try my best to orient my parts as best I can, do you have any suggestions for better quality for a Delta style printer?

@Farro2005 Ай бұрын

What specs would you need for a resin curing uv flashlight, for repairing prints with resin

@WKfpv Ай бұрын

So the answer is get a P1S printer.

@CrazyRandomBayKidWay 11 күн бұрын

What websites do you use to download prints of what you want or do you even use them?

@ThatADHDad Ай бұрын

Any chance you want to do an updated version of your “how to attach pieces together” video with links? I watched the one from 3 years ago I think and was wondering if you have newer techniques or products.

@basedgod5223 Ай бұрын

I have a longer lk5 pro, and over 2k hours of printing on it, it works fine other than the face that it doesnt lift up the right hight first few layers, causing what i though for tge longest time was elephants foot. Still never found a fix for this other than the fact that printing with rafts gets rid of it. Anyone have a simular issue?

@user-hf6se3qt5r Ай бұрын

You should make a video about the Creality K1C to finish the k series

@dia_beast Ай бұрын

Can you please make the Firestorm shard blade from the storm light archives?

@nigel5823 Ай бұрын

the new creaity print that just came out is based on bambu lab and it good and the printer as been made faster

@nicolescott3951 Ай бұрын

Hi, we've tried printing an articulating dragon files from thingiverse several times on our creality K1 Max we sliced it in orca with no supports but every time we try to print it the printer stops on the first layer. The nozzle is not clogged the filament just stops coming out. This has happened on several other articulating dragon files, and now we can’t get a single print now it’s happening on other prints too any idea what’s happening

@R1chie._. Ай бұрын

First lets go frankly im a huge fan

@conner7281 Ай бұрын

Frank, i was wondering with your camo Iron Man helmet ,how did you get the black and grey on it so perfectly? Did you use a stencil or did you hand paint it?

@FranklyBuilt Ай бұрын

Vinyl cut stickers

@user-uc6tb3gv7d Ай бұрын

What is your opinion on Qidi q1 pro

@thomasthurman4927 Ай бұрын

I’d love to see if you’ve done any calibration for your filament on the K1Max. Before the latest firmware update, it would seem like I’d spend about an hour running all sorts of calibration tests to dial in the printer for extrusion flow rates and whatnot and bypass the auto calibration on my k1Max. With the latest firmware that seems to be somewhat mitigated but would be interested seeing what you do there.

@FranklyBuilt Ай бұрын

I don’t do any of that lol I just update it. Let it run its auto cal. And I print

@vince2lille Ай бұрын

What is your opinion on Outer to Inner or Inner to Outer ? Will be interested in diving into because i saw great results

@FranklyBuilt Ай бұрын

Never messed with it

@JustinNowell-jb4yq Ай бұрын

What filament do you use? I order mine from Bambu Labs but I takes a while to get ship to me so I am looking for another good affordable brand that I can get quicker

@FranklyBuilt Ай бұрын

Sunlu

@reedporter-nd9mn Ай бұрын

Hey I have a little business where a sell 3d prints to my friends. They are hand painted and about the size of a funko pop. And I’m wondering what I should charge

@michaelflying 7 күн бұрын

Could you print smoothly on an enter 5 pro ?

@Bomfunknight Ай бұрын

W video cheers for all the awesome tips and tricks im using cura myself with a elagoo neptune 4 max usualy set the model in the middle middle area when possible with as much surface attached to the bottom for good support

@yadascht513 Ай бұрын

When the next Ironman Series comes out bro ?

@MrZava24 Ай бұрын

The issue I have sometimes is the nozzle hitting and knocking over the supports. P1s bambu studio slicer.

@masonwhite325 Ай бұрын

Do you have any tips on how to smooth a 3D print with a lot of details and hard to reach places? Or is it just smooth right off of the printer? Also, I am in the market for a new printer and was considering the Bambu Lab A1, would you recommend that for super smooth prints, or should I get the P1S?

@FranklyBuilt Ай бұрын

Small metal files and lots of sand paper. Or higher print quality

@masonwhite325 Ай бұрын

@@FranklyBuilt thanks a lot :)

@Riv3raLiz Ай бұрын

I have a anycubic kobra max 2. I’m thinking of buying a different one. However, I’m still new to printing.

@Blitz_FunSize Ай бұрын

Sup frank is there anyway you can help my Bambu lab printer is clogged pretty bad and none of the online tutorials help.

@elliotrhodes5988 11 күн бұрын

Hey Frank, Please read this. I am trying to create a daft punk helmet. The printer I am working with is in a library and I need some advice to get started. I know the basics but I don’t have the skills or knowledge for actual printing. I need a personal boost.

@LTthePrintingKing Ай бұрын

Hey there I had a question I never see you have a Sonic pad on your CR-M4 or your elegoo Neptune 3 Max just curious why is that don’t you want your prints to be done faster

@FranklyBuilt Ай бұрын

They come out perfectly fine and fast. No need to spend money and fix something that isn’t broken.

@Morph_Makes Ай бұрын

🐐🐐🐐🐐🐐

@SerenityRen6 Ай бұрын

What about delta printers? I have a love hate relationship with mine at the moment. When it works it's great but recently it's decided to foul the initial layers, no matter what settings I tweak, so I'm now unsure if it's a hardware issue but not sure where to start

@FranklyBuilt Ай бұрын

Damm. I like. 100% forgot about them haha 😂

@SerenityRen6 Ай бұрын

@@FranklyBuilt fair, good answer. Honest and direct.

@derekteter982 Ай бұрын

People hate on raft? Raft is awesome. I had to print some super skinny parts the other day that kept coming off the plate even though first layer adhesion was great. Nothing short of absolutely nuking the plate to a risky degree worked until I tried raft.

@MajikPPMan Ай бұрын

It's about thinking, trial and error and analysis on what the problem is and why it's happening. Figuring this stuff out this way takes longer but ultimately will make you a better printer rat. Look at it like a math problem that needs to be solved. Then when all else fails, youtube and reddit lol the answers are out there. Good luck everyone!

@CarlosPerez-er9ns Ай бұрын

Was that Jinwoo venom dagger

@TehKaramelo Ай бұрын

Nobody else noticed that in Cura its 20,5% instead of 5%?

@user-gk9ut9qc1o Ай бұрын

He probably forgot

@acgamingpresents9070 Ай бұрын

My K1 Max has been clogging whenever I run a print with multiple objects. Any ideas on how to fix it? Thanks.

@FranklyBuilt Ай бұрын

Get different filament maybe

@donderbassie Ай бұрын

Using a ender 3 V2 standard profile in Orca gets you a warning immediately for travel speed. Its too high according to program, Im not totally sure but maybe sbout 700 mm/s while the max according to the same program is 500 mm/s or something like that. Also my support broke off because of standard support settings (speed high and density 0). Im still not convinced Orca is better for my printer

@JCSLTD 12 күн бұрын

Hi FB, Would it be possible for you to upload your config files to your Patreon ? I am mainly looking for Neptune 3 max 0.6mm and 0.8mm settings but have a range of printers that could be beneficial. I have picked up a lot using your videos but working out where a profile has gone wrong seems to be an issue, my K1 with a 0.6 is currently out of action as I seem to have really messed that up with constant jams now, thought it was the printer at first until I moved onto my 3rd extruder and it still didn’t work 😅 As usual good video ! Thanks

@FranklyBuilt 12 күн бұрын

Hey! I don’t have config files. I show exactly what I do in this video. Just use the stock profiles and only change infil and supports. The more you mess with the worse it will be.

@user-vl2xp8td4j Ай бұрын

have you ever thought about making a tpu Deadpool mask?

@firstaidenguy3052 Ай бұрын

he frank, how did you get your build plate to be black in orca??

@FranklyBuilt Ай бұрын

No idea. It’s just like that

@3DArtFusion Ай бұрын

It looks like you left something out with the CoreXY Printer style which should be mentioned imo. While the bed only moves up and down it Does bounce ever so slightly up and down While printing. If you watch them closely as they print you can usually see it happen which is why, I assume, so many people complain about certain prints not doing so well on them.

@astrophysicistguy Ай бұрын

Not the PRUSA XL

@3DArtFusion Ай бұрын

@@astrophysicistguy I just realized what I was talking about is the Z-Hop. Sometimes forget the way Z-Hop works on CoreXY is different from Bed Slingers, or beds that don't move at all.

@Chrisisthebest28iy Ай бұрын

Frankly you should do a video ranking every 3d printer lol

@kjwelk931 Ай бұрын

What’s a good printer that can multicolor print that isn’t crazy expensive?

@FranklyBuilt Ай бұрын

Bambu lab a1

@kjwelk931 Ай бұрын

@@FranklyBuilt do you think it’s worth it to get the p1s combo instead for a couple hundred more. For the encloser and the stable bed.

@Fusion4687 Ай бұрын

Ok so I have a question, I know you have a Neptune 3 plus and I’m curious, do you have to use a raft. I haven’t had a successful print without one

@FranklyBuilt Ай бұрын

Sure if it works

@jonathonantonio1973 Ай бұрын

How do u clean the bed? I occasionally have adhesion issues after a while without cleaning it. Soap and water and then an alcohol wipe. Also how does ur z offset look? I squish mine probably a bit too much but I’d always rather some elephant foot rather than the print dislodging

@ChezzzyKid1234 Ай бұрын

I stopped using glue, glue builds up in the ‘pores’ of your magnetic bed, creating a smooth surface. But hey, that’s me.

@Fusion4687 Ай бұрын

@@jonathonantonio1973So I do use soap and water but I don’t use alcohol wipes maybe that is the problem. Thank you for the advice!

@Fusion4687 Ай бұрын

@@ChezzzyKid1234well the other two printers I’ve used, I didn’t have to use glue but for some reason I just can’t get the print to stay on the bed with my Neptune