Thanks for watching Olukemi. I’m glad you enjoyed it. 😘

Glad to hear! Thanks for leaving a comment.

Thank you so much!

You're way too kind! Thanks a million, Tracy. Means a lot! 😘

I'm glad to hear! Thank you so much for leaving such a lovely comment. ❤

Oh how lovely, Christy! I'm sure the result would look stunning with a bit of rub & buff.

Oh that’s wonderful, Kristin! All the best with your engraving journey and thanks so much for your lovely comment. 😊

You’re most welcome and I’m so glad you found my video helpful and enjoyable to watch. Thank you so much for the lovely comment! 🌸 To answer your questions, I clean the pillow using a small handheld vacuum to get all the dust out, and yes I do still outline with a sharpie or similar pen from other brands when I’m at an activation as it’s really important to get the spacing and sizing right. Hope this helps. 😊

I’m glad to hear, Richard! Thanks for the kind words and hope you start on this new hobby.

I’m glad you found it helpful, Shaquetta. 😊 Thanks for watching.

Oh I’m so glad you found it enjoyable and helpful, Rachel. Thanks so much for your lovely comment. 😊

Thanks for watching. 😊

Thank you so much for watching Stephanie. I'm glad you found it helpful. 😊

I’m glad you found it informative and enjoyable, Desley. Thanks so much for the positive comment. ❤️

Glad to hear. 😊 Try getting your hands on calligraphy/ lettering workbooks to practice writing in different scripts until you find one that’s naturally your style. Thanks for watching and hope this helps.

Thanks so much for the support and I hope to share more of my engraving soon. 😊

Thank you. Glad you enjoyed the video. 😊

Thank you so much for your lovely comment.

Btw, I’m your 96 subscriber

@@ahuman3642 thanks so much for subscribing and I’m glad you enjoyed the video. 😊

kzfaq.info/get/bejne/mrWHiauVmt-yiJc.html 👍👍👍

Thank you. 😊

Thank you so much! Yes, it’s definitely worth the investment if used often. 👍🏼

I comment as an old hand in this work. No one knows hiw many of these machines will in fact be kept by ppl who buy them.. This is because not all will become skilled in using it. It takes much patience and extensive practice to become effective enough to earn money from it. It is curious how this point is not mentioned by demonstrators.

It’s all good, Nancy! 😊 Thank you so much for watching and the lovely comment! Engraving certainly is a detailed craft and practice helps perfect it with time.

Thanks so much! Glad you love it.

Many thanks for watching! 😊To be honest, I have only used Rub n Buff with success and can't recommend an alternative that's been tried and tested. Rub n Buff is available on Amazon, if that helps? I've left a link in my description box Hopefully they can deliver to you.

That's so sweet of you to say, Gwen. 😊 Thank you so much and I'm glad you found this video helpful. I work on quite a bit of commission work but haven't done any videos going into detail about the process.

@@TheStyleGene Would be great if you decided to share your journey one day! 💕

Thanks Maria, glad you enjoyed the video. The heat pillow was gifted to me a while back. Similar pillows can be found online or try Etsy as well for some handmade options. 😊

Thank you so much Joyce! You will probably need some sort of transfer paper to trace onto glass. It can be tricky as pencil won't really show on glass so you'd still need to use an ink marker of some sort. Alternatively, you can also try tracing onto a washi/ masking tape then applying that tape onto the glass and engraving over it. But the cleanup/ removal of the tape after can be a little messy but certainly doable. Maybe give that a try?

Thanks so much, Lizzy. I’m glad you found it helpful. 😊 Rub ‘N Buff is waterproof and permanent in that it has good staying power being wax and oil based so it’s better than paint or spray paint. But if scratched with a hard surface, it could still scrape off.

You're most welcome. Jenniful! In this video I'm using a 1.6mm diamond bur. Hope this helps. 😊

Thanks so much for your kind words, Valerie! I'm glad to hear you've started your engraving journey. I don't have experience using a micro motor drill but I wonder if it could be the bur that you're using? The motor itself should work fine but if you're not even making a scratch on the glass, my guess would be the bur used may not be suitable for glass. They come in various sizes and tips - some are more suited to metal, wood and plastic. Sorry if I'm not of much help but I hope you find a solution soon as I'm sure you'd love the process of glass engraving. 💚

Your Q's can not be answered here as such details are known to micromotor users, unlike demonstrators here. M'motors are much more durable, cost more but they are truly tough tools to use great part of a day by professionals, including jewellers and general jewellery and awards engravers each day. Nail buffing machines are less caoable to last over sevral hours work. Using industrial diamond crusted tips is suitable to mark glass. Be careful in choosing size & shape of such burrs. Dental suppliers & jewellery tool suppliers will assist with details on range of these. gd luck

You’re most welcome. 😊

@@TheStyleGene Is the drill you are working with up to 3,000 rpm? And do you have a sales representative in the Netherlands? 🙏

@@sh.4325 it’s up to 35,000 rpm and I believe Ink Me This delivers worldwide. The link to the website is in my description. 😊

@@TheStyleGene thankyou so much🌸

My pleasure. 😊

I’m glad you found the video helpful! Yes, Rub n Buff is permanent if you buff it in. I wouldn’t say it’s waterproof (so, no dishwashing), but it’s definitely water resistant. I highly recommend trying it out. 👍🏼

Glad you found it helpful, Justine. 👍🏼 If it’s been on your mind, I think it’s something worth saving up for. Yes, this was shipped to me from the US. Pretty sure worldwide shipping is available.

@@TheStyleGene I used it for the first time just now. It was not very good, I need some practice

@@justinemccarthy5218 congrats on getting your new engraver. Yes, practice practice practice. You'll get the hang of it soon. 😊

Hi Stephen. You can try pharmacies or if you have a Daiso in your area? Sometimes K-mart and Target might have similar ones too. Or Amazon?

Thank you so much, that's really kind of you. I completely get what you mean especially with a slippery surface like glass. I'd say it comes with practice - the more you engrave the better control you get as your hand gets used to the vibrating bur when it touches the smooth surface. A good tip is to rest the side of your hand on the edge of the heat pillow or whatever you're using to hold the bottle in place. That helps give your hand better support as well. Happy engraving and keep it up! 😊

Hi there. Practice definitely makes perfect. The USD price can be found on inkmethis website - the link is in my description. There are instructions on the machine but not for engraving. The battery really depends on your usage. If you don't use it often, it can last months without a charge. But if you're using it on a daily basis, you'll have to charge it more frequently. Hope this helps.

Price range 300-500usd.

It is waterproof but the chemicals in dishwashing tablets will lighten the Rub n Buff over time. So yes, it could get washed away after a few rounds but if it does you can always reapply. Or handwash the drinking glass with mild dish soap. Hope this helps. 😊

Yes, you can try using a soft stencil or one made out of paper for curved surfaces like a bottle. But I would only use it to write and mark the letters on the surface, then removing the stencil prior to engraving. Engraving with a stencil on may be tricky.

Thanks so much for watching. 😊 Yes, a similar one would be the Redecker Copper Microfibre Cloth where it is smooth on one side and has the waffle weave on the other. Happy engraving!

hey Solomon, thanks for watching. You can get the engraver from Ink Me This. Link is in my description.

I was using a heat pillow that I happen to have at home but you could use any surface that holds a bottle in place, not necessarily a pillow. 😊

Thanks for watching and I’m glad you found it helpful! How exciting to be embarking on a new creative journey. You could possibly try experimenting with acrylic paint but Rub n Buff is the best tried and tested product to fill in engraved surfaces. If it’s not widely available near you, I’ve left a link in my description box to purchase on Amazon if that works?

@@TheStyleGene that would be helpful, thanks so much! Keep up your lovely work!

@@kraftedbykat likewise! Love the creative content on your channel too.

I got this from InkMeThis and the link is in the description section of my video. The engraver has The Style Gene for my use, but you can have it personalised to your own logo. Hope this helps.

The one I'm using in this video is from Ink Me This but there are also other alternatives that you can find on Amazon, as long as you go with a brushless motor option.

I got this from InkMeThis and the link is in the description section of my video.

On the website it only mentions use on glass, metal, stone and I personally have not tried it on wood.

Thanks so much and I’m glad you found it helpful. 😊 You’re right about champagne bottles which is why I avoid engraving on them due to the safety risks. You could try a lighter hand while engraving but I would err on the side of caution, especially if gifting it to someone else. Happy engraving!

May I know what's the difference between a champagne bottle vs a wine bottle?

@@littlellamblet due to high air pressure in champagne bottles compared to wine bottles, there can be a risk of injury if the thickness of the glass is compromised. Hope this helps. 😊

Do u mean that champagne bottle glass is thinner than wine glass bottles therefore may be more risky in case it cracks during engraving? Sorry if it's a silly question

@@littlellamblet not a silly question at all. 😊 The glass on the champagne bottle will be thinner after engraving, thus increasing risk of injury. Hope this helps.

Thanks for your support, Thomas.

Yes, if the mug is made of glass. I haven't engraved on a ceramic mug as yet but it shouldn't be an issue either.

@@TheStyleGene thank you💗

Hi. I personally haven't tried anything other than rub n buff so I can't recommend an alternative.

The colour used in this video is Autumn Gold.

Glad you love the engraving process. I think Ink Me This has the occasional sale or discount sometimes but I'm not 100% sure. Best to sign up to their newsletter to be kept informed. There are other hand engraving tools at various prices but their performance will vary as well. Hope this helps. 😊

@@TheStyleGene yes, helpful. I am inspired by the way you explained it, and your works are so organized, systematic and clean. How long have you been doing this?😁

Thank you so much! I really appreciate your kind words and hope it inspires you to engrave as well. 😊

@@TheStyleGene you're welcome sister. I hope I'll be able to catch up soon with the engraving work. By the way, would you mind telling me where you are from?

I'm sure you will. Keep on pursuing it, if it is your passion. 😊 My videos are brought to you from Australia. 🇦🇺

I've engraved on empty and full bottles before with no issues. But always take safety precautions, to use a light hand when engraving, especially as it is glass.

do you mean the engraving service itself or the engraving machine? For engraving, it depends on what's required. For the machine, you can check out the link in my description that will take you to the Ink Me This website.

@@TheStyleGene I meant how much for this example of engraving. I understand there will be 2 names. How much for 1/2 please? So I have an idea. Does it work best per unit or on an hourly rate? Thanks 😊

Thanks for clarifying your question. 🙂 It really depends on where you live and what the median wage is like. You need to factor in your time and the tools required. Some calligraphers charge per unit of item and others on an hourly rate so we're all different depending on your location and other contributing factors as well. Essentially you want to ensure the price will cover your time and skills involved. Hope this helps.

@@TheStyleGene thanks that makes sense

you're most welcome. 😊

And do you also have Facebook?

Yes, it was sent to me from America and didn't take long for delivery to Australia but this was before the pandemic got worse. Happy to answer your questions here. 🙂

I would love to but unfortunately I'm unable to send alcoholic bottles in the mail. Sorry, Linda.

I know which sucks I'm trying to find someone who does it 😅

@@lindasuttles3968 wish I could help. Which country are you located? I could recommend local engravers to contact?

@@TheStyleGene Im in the USA

@@lindasuttles3968 if you’re on Instagram, try searching hashtag ‘engraver’ and there should be plenty of options in the USA. Hope you find someone suitable for the job. 😊

It would be preferable for added eye protection. 👍🏼