How I Lost $11,000 Selling T-Shirts - DONT MAKE THIS MISTAKE

Рет қаралды 47,604

Жыл бұрын

In this video I talk about how i lost $11,000 on t shirt printing equipment. Dont make this same mistake.
Support the channel and learn more about starting a clothing brand from home. Early access to videos, Rewatch Live Streams and Content made just for Patreon! Check out / bigbrandoh
Check out my E Books and ALL Big Brandoh Shirts and Hats at BigBrandoh.com
Follow me on Instagram @BigBrandohTV
Use my affiliate links below if you are looking to buy supplies or equipment. No extra cost to you and it helps out the channel.
Ricoma Embroidery Machines
ricoma.com/US/referral/BigBra...
The Heat Press that I use
heatpressnation.com/bigbrandoh
Ricoma Heat Press
Use Code BRANDOH10 for 10% OFF
shop.ricoma.com/?referral=Big...
Stahls Heat Press
shrsl.com/3i0k1
The Hat Heat Press that I use
shrsl.com/2gw8d
Heat Presses for all budgets
shrsl.com/2f0wd
Cameo Vinyl Cutter
shrsl.com/29zpz
EconoTransfer HTV
Econo.BigBrandoh.com
BFlex HTV
BFlex.BigBrandoh.com
ThermoFlex HTV
ThermoFlex.BigBrandoh.com
Siser Easyweed HTV
shrsl.com/1z0qf
Supacolor Transfers
Supacolor.BigBrandoh.com
Transfer Express Transfers
TE.BigBrandoh.com
Shipping Supplies and Heat Press Supplies
Poly Mailers, Scales, Laser Thermometers, Safety Rulers, T Shirt Folders, Clear Poly Bags, Cutting Mats etc.
www.amazon.com/shop/bigbrandoh
Sawgrass SG500 - Sublimation Printer
Sawgrass.bigbrandoh.com
Heat Press Base Cover
shrsl.com/1ud1q
Blank T Shirts and Tumblers
Blanks.BigBrandoh.com
T Shirt Mock Ups and Design Templates
sockitos.com/collections/down...
Custom Fonts
www.tkqlhce.com/click-1008454...
TRUSTED HEAT PRESS SITES For ALL of your Equipment and Supplies needs:
Heat Press Nation
HPN.BigBrandoh.com
Heat Transfer Warehouse
HTW.BigBrandoh.com
If You Need a Graphic Designer. Look up these guys on Instagram:
@aka_jerry_m @Dizmajiz @Rawtoons @BrentTab

Пікірлер: 171

@sandradelagarza7974 Жыл бұрын

Thanks for sharing this video We thought we were the only one 😢 we have a DTF 😢 it suck If people could be Honest and tell us the truth no one would buy things like this

@BigBrandoh Жыл бұрын

mannnn its an expensive lesson to learn. i feel your pain. just know there are a lot of us out there. sad to say. there are more horror stories just like mine and yours out there than actual success stories. and most people are to scared and too ashamed to speak out about it. cuz it is embarrassing as a business owner to invest in something that turns out to be a waste of money. nobody wants to share their failures.

@JGallis 9 ай бұрын

@@BigBrandohthat’s why you are the man

@chuckgaudette8885 Жыл бұрын

So on point. When we go to these shows we are at a disadvantage if we don't know the right questions to ask. The sales guys aren't going to volunteer the downside of the technology. So doing your research is priceless advice.

@BigBrandoh Жыл бұрын

thats right Chuck. the salesmen are there to make the sale haha. we as the consumers get blinded by the sales pitch most of the time. its tough because most of us consumers are start ups or small shops and we dont have the big budgets to drop on a failed system. but the salesmen prey on people like us haha. sad to say.

@pressedbymigs7756 Жыл бұрын

Def appreciate you sharing the struggles, it helps others realize they are not alone during hard times like this...

@soundzzznimages4423 11 ай бұрын

I really do appreciate your integrity. Thank you for all your videos!!!

@mubasheer Жыл бұрын

Wow man, Thank you for sharing your experience. Just listening to your experience caused my blood pressure to shoot up. Your resilience, dedication and patience is commendable.

@yoflor6412 3 ай бұрын

I appreciate your honesty. I am just starting and I love all the advice.

@alfonzoblackburn34 11 ай бұрын

Thanks for sharing some wisdom B. I know for sure that you really helped a lot of people that probably couldn’t afford that kind of loss !

@jailove71jailove Жыл бұрын

Thank you. You have a good heart. We all appreciate you keeping it real

@BigBrandoh Жыл бұрын

thank you for watching. i really appreciate it

@marvinallen7497 Жыл бұрын

The realest I’ve seen yet much respect Big Brandoh

@l0sfuertes_westadamsarea213 Жыл бұрын

Saludos OG!! Much luv n respect 👊🏽

@debrajeanbowen1520 Жыл бұрын

Brandoh , you’re freakin awesome ! So true , you’ve taught me so much , my business is alive because of your tutorials , god bless you .

@wpf312 Жыл бұрын

Props for sharing the mistakes as well as the successes!

@bigandsmallsrvadventures 11 ай бұрын

I love your honesty.

@myrtamaldonado9108 3 ай бұрын

I love your honesty. I have watched practically all your you tube videos. I am a retiree who wants to get my hands on printing T-Shirts just to make money on side to help with my bills. Still researching so I can make the right decision. Thank you once again.

@LosFoodiesMagazine Жыл бұрын

Thank you! I was going to buy a dtg printer. I am glad I switched to buying straight up heat transfers and then using my heat press and simplify and take out a bunch of steps.

@josedinero2429 Жыл бұрын

Because of you I been 2 yrs in creating my own apparel. I appreciate you always sharing the good & the bad. I’ve learned a lot through my own experiences but you help guide the way to try avoid few more mistakes 😅

@ACB2K Жыл бұрын

If you don't sell your Tshirts expensive, it doesn't make sense, its competing with the chinese. All the weeding of the HTV, it's too much.

@lummers12dub 6 ай бұрын

Brilliant video. Solid advice. Thanks for all you do 👍

@edwardnewbins 6 ай бұрын

Great storytelling! I'm learning a lot. Thanks!

@jasonregan2064 Жыл бұрын

Real as it gets. Thanks for helping me avoid mistakes. I wish you didn't have to go through all the headaches.

@crackshotscreenprinting 7 ай бұрын

thank you for this information brother, great for us new shops to know.

@user-kz6gn4rn3w Жыл бұрын

I’m feeling the no start feeling right now. Appreciate finding your channel needed to hear truth.

@MikeTees Жыл бұрын

Great Vauable information thanks for this I needed this , Continue to be great !

@JuggaknotPunch Жыл бұрын

Dope message …real business people know the value of this experience..awesome share BB!

@BigBrandoh Жыл бұрын

thats right!!! thanks for watching 💪🏾 i learn a lot from other peoples failures and mistakes. happens to alot of us but i hope i can help somebody coming up not to make the same dumb decisions i've made.

@HennyJusto 7 ай бұрын

Subscribed for transparency 💯

@Therealav Жыл бұрын

THIS is great content. real life struggles, we all go through them and yeah talking bad aint good for content but the real needs to be talked about not just the good and sometimes the real aint pretty. Thank you for this.

@SunshineTriniGal 8 ай бұрын

Thank you for the straight no chaser info! Much appreciated

@njoysuccessnow Жыл бұрын

That's real stuff, my brotha. You had a lot of determination, back then, for as young as you were. That means that you really believe in your idea and that's crucial.

@lionelfullheart Жыл бұрын

I appreciate your honest fr .

@sledgenft8856 Жыл бұрын

Thanks for the info big Dawg good video informing AF

@LesCharles Жыл бұрын

This information is extremely helpful. I’m a partner of a Menswear brand and graphic tees are very necessary for branding and aesthetics. Thanks for sharing. ✌🏾

@teesprintandapparel Жыл бұрын

yooo thanks for this!!

@wesleyferrari8116 Жыл бұрын

First of all, thanks for the information, I had no idea that those machines have so many problems like that,good to no. U are the best,🙏

@robertbrown9785 Жыл бұрын

love this reality check! ty

@TheSdot122 Жыл бұрын

I was going thru this with transfers, not to that extent but researching which transfers to go with. Some don't lay down as nice, some literally come with NO pressing instructions. I said F it...strictly Supacolor from now on. Appreciate the free game big bro, per usual

@jasonflatearther 6 ай бұрын

Awesome video. Thanks for sharing your experiences. I'm glad everything seems to have worked out God bless

@iheatpress9984 10 ай бұрын

Thank you so much for sharing this video! I had the same issue with this printer, sold it out, and preserved the rest of my money! I didn't buy any other new devices before ensuring that after-sales services were practical and helpful. I lost my money, about $4000! That was a lot of money for me. We all learn from our mistakes.

@bryanvanmaalsen2697 11 ай бұрын

Valuable lesson learned. I think companies have a responsibility to tell customers about the good and bad side of their product. Will only make them more trustworthy if they tell the truth. Thanks a lot for sharing 👍🏾

@RobbieBlack-og1zh Жыл бұрын

bro ty so much for these vids bro youve saved me so much money 100. because of your vids i make sure i research everything. 1 year in business doing tshirts i fee like ive just broken even or maybe just over and im happy with that when it could have easily been alot worse. appreciate it bro 100000000

@Slim7031 3 ай бұрын

Great info brother. Sad reality, the "customer service"is always A1 PRESALE. If you ask a out support, these companies will always say "Oh yea we provide that " until you buy the machine. Afterwards, they're ghost. I applaud you on NOT TRYING to put a Co. On blast, but thisis what WE need to know as well. If they're trash, lets speak on it so the next guy won't be their next victim! Appreciate your gems brother, as always peace and blessings to you!

@ladyz4609 Жыл бұрын

Wow what a sad and incredible story. You were patient!

@PrintStitchLLC Жыл бұрын

Nailed it! Absolutely make sure you research research research! There’s a lot to them and they are so expensive!! Been there done that!

@lovemode9862 11 ай бұрын

Thanks for sharing. I’m going to continue to invest in my screen printing setup and skills and become efficient as possible in this method. 😎

@papado72 Жыл бұрын

Good stuff...thank you!

@jeffpolk4800 11 ай бұрын

Great information bro! Sucks you had to go through all that!

@MrElchalo Жыл бұрын

That is some good information, i glad you let ohters kinow what to look out for.

@BigBrandoh Жыл бұрын

just tryna make sure people are well informed when they make these big purchases

@Laugh-with-Aaron 6 ай бұрын

wow thank you for this bro

@1justwill 6 ай бұрын

Thanks for your honesty. I almost dropped 5k on one of these. Good looking out. Keep up the good work.

@calw8085 Жыл бұрын

nothing but facts here. people losing money the same way to dtf because of those same promises. and buying $5000 - $8000 dtf printers which in reality are $300 epson printer models very cheap and being converted and white labeled and marked up extremely. Just for the issue of inks clogging and they go to clean the print heads and printer ends up fried and bye bye $5,000. I converted my own epson printer when getting into this space, and was best thing i ever did. instead of wasting $5k on a cheap epson.

@peachiedixon4791 11 ай бұрын

Which Epson printer did you convert? Thinking of doing the same... I have the 8550. Thanks in advanced!

@ronalddelarosa1734 8 ай бұрын

I’d like to know as well.

@eddygordon7170 3 ай бұрын

Me too please!

@larrycerda7126 Жыл бұрын

Yup u nailed it. My biggest regret. I bought an Omniprint had and still having those problems

@TwelveGoneApparel Жыл бұрын

Hell of a lesson learned , man

@FitFutureMD Жыл бұрын

They definitely promote them like they are the best thing ever! Transfers all the way until your brand takes off!

@pandemiccraftee Жыл бұрын

I wish I had researched dtf journey before wasting $4000.00 on it. Things that were not shared you’ll need windows computer, I’m a MacBook girl, you’ll need buy rip software, you’ll need special ink and a lot white ink, list goes on… I’m really disappointed in whole process still trying recover from the loss. Thanks for being authentic and sharing!! This will definitely help me make better decisions in the future.

@euniceappling7912 Жыл бұрын

Thank you, i was definitely thinking of getting one. I am not mechanical minded at all.

@BigBrandoh Жыл бұрын

yeah man. most arent. so thats the big downside when owning these machines.

@FUKURFEELINGS8989 Жыл бұрын

Thank you for the video was just going to buy one

@maz_mtb3266 Жыл бұрын

I'd love to own a DTF to print in-house on demand. I live in a small area in midwest and don't have the option for picking orders from from a transfer company so it makes my TAT a good bit longer waiting on orders, especially if it's a one-off custom for someone which usually ends up being HTV then, but ability to print a DTF for the job would be really nice. However, I had a high-end photo printer for about 8 years and it's similar. You can't let them inks sit without being used pretty much daily along with spend as much time doing maintance as you do actually printing products to fulfil orders. But I also know with DTF, I probably wouldn't be happy trying to work with a entry level setup so there's a huge investment unless I would start printing DTF for others on top of my own jobs, which seems like a good amount of people end up doing.

@debrajeanbowen1520 Жыл бұрын

I go through imaging spectrum Dallas . They troubleshoot EVERYTHING . Like two years later and my tech guy still picks up even if I asked the same question last week . 😂.

@michellez5906 7 ай бұрын

Hey Big B excellent videos! Greatly appreciate you sharing your knowledge. I see on your heat press you have a cover on the upper plate can you share what that is and do you use it on all pressing? Thanks in Advance for your advice!! Have A Blessed Day!

@TheOneAboveAll-001 Жыл бұрын

Thank you thank you thank you!

@oceanz2174 11 ай бұрын

Hey Big Brandoh, that was a super bad experience for you, that was a hell of a let down. But the best thing is you didn’t give up. And by the what’s the best quality plain tshirts to start with. Having trouble with finding good quality tshirts plains with the tear off tags 🏷️. Would be great to hear from you about what to go with.

@cardellstewart5588 Жыл бұрын

Hey Big B...i have a brother GT-541 when they first came out and i still have it to this day selling white and ash gray tee prints, the issues you have mentioned is the reason i did not ever buy an epson, ricoh etc, to many issues, i didnt even buy the brothers new machines due to the white ink issues and maintenance..and shirt prep spray machines, some you have to touch the shirt 4x for one print...

@allanabess9994 Жыл бұрын

Thanks for sharing this video!! I got seduced by the great marketing and bought a DTG printer. The companies are not completely truthful in their marketing. Yes you can pre-treat with a Wagner power sprayer, but you will not have any consistency. I ended up purchasing a used pre-treat machine which greatly improved my results. They also leave out the huge amount of maintenance and consumables along with the temperature and humidity requirements. The print head will clog on the regular and tech support always tells me I need to flush and cap the machine off for 7 days. The only people making money in DTG are the companies selling the machines. Its cheaper to leave my machine capped off than try to run it.

@BigBrandoh Жыл бұрын

hahaha 100% agree with you. sounds like a lot of people had the same experiences.

@Supacolor Жыл бұрын

You can always Supacolor it 😎💯

@TheUnholyPosole Жыл бұрын

.. what's the minimum order quantity?

@duranhumberto6322 Жыл бұрын

Man I gotta say you hit the nail on the head on this one ....can I add fake software being sold from non trusted reseller ...so yes thought it would be a snap but same issues just starting DTF humidity temp acrorip it starts to add up ,oven which I haven't purchased yet cause I'm starting to see your point and have someone else with set up make my ready to press dtf's quick ? I'm sure lots of others would like to know is cost , what's reasonable price for a full color DTF if I out sourced that part ? I also realized why some designs are simple with hardly any artwork , cost $$$ and trial plus errors ... well got more stuff dealing with like who to purchase if you go with temu you can find some good quality but if you want a large you'll have to go up a size XL think they measured people outside of the states 😅 thanks 👍 for video

@MasterScreenPrints Жыл бұрын

I wanted to buy one but then I have heard of all the maintenance. I’m glad I didn’t. I’ll stick with screen print transfers.

@nellya2398 Жыл бұрын

I had a DTf printer and noticed all this problems in the first month so luckily put a charger back when the company refused to return the hectic printer.

@PhilTravisano Жыл бұрын

Thanks for the nightmare story. Confirms my decision to have never tried to start my own company.

@thetwentyninedesign Жыл бұрын

Happen with me and a brand named heat press maker. Spent a few thousand and then it stopped cutting on before I even pressed my second shirt. No tech. No refund. Just a module sent out the I had to repair! It was a brand new machine! Never again! I’m definitely vetting the next company!

@SheKeepShit1000GodIsLaw Жыл бұрын

@thetwentyninedesign what brand was the heat press bro? Blast them mfs out speak up so we can slow they bitness up by not patronizing they asses

@morizanova Жыл бұрын

Yes!! sometimes DIY not always the best decision. Especially for people who still have limited technical knowledges real life experiences and how to run a small business from scratch

@BigBrandoh Жыл бұрын

we all dont have to be the factory but we are programmed to think "to be a business we need to cut out the middle man" hahaa thats not the case. sometimes the middle man is the one who is keeping us from investing our life savings into something we know nothing about hahaha

@DavidHarveyWV1 Жыл бұрын

Man I can't even begin to feel your pain. I bought my heat press thru your links from heat press nation. I lost money on a mug press and a sawgrass easysubli machine. I did better converting an Epson. My Sawgrass has been sitting for 3 years.

@STANDONFAITH229 Жыл бұрын

Can you explain a little when you say you converted an Epson? I'm currently looking at getting a dtf machine for my brand and to sell dtf prints

@TamiT3 Жыл бұрын

I started watching your channel after seeing you on heatpress Nation podcast and and so glad I did. Couple of questions: 1. I have a dtf and still can't find a way to make the image feel softer when it is one solid image. Any suggestions? BTW my dtf is very high maintenance! I have a dehumidifier and all the extras. It's still daily maintenance!! 2. Is it worth learning screen printing and all the equipment needed? 3. I love the hotronix 360 cap press, my wallet doesn't. Which one do you suggest that is a small step down from that one? Thank for all you share. I have learned so much!

@etenbroeck 11 ай бұрын

It happens to us all. I had similar experience with a software company. My fault, I did not do my research or check references. E

@richardjones8236 Жыл бұрын

I get where you are coming from. As a newbie, you don't know what to ask. And it's not what the salesman says, but what he doesn't say that really counts. I've had these types of issues in a lot of different products over the years. If I can't get a at least a full, one-year warranty, and a local, authorized repair company, FORGET IT!

@tobe1359 Жыл бұрын

try the Epson SureColor F2100, does DTG and DTF, price went down special to 10,995 it was last year 15,999...retail, $18,995. The machine does the maintenance itself. You just need to clean every 2- 3 weeks the heads (easy).

@BigBrandoh Жыл бұрын

thanks but no thanks. doesnt sound like something i'd be interested in.

@King_Marzz Жыл бұрын

Damn thats crazy🤦🏽‍♂️

@williambermudez204 Жыл бұрын

Thanks for your honesty! I have held back from getting a DTG and DTF printer from fear of these problems. I just hate turning small orders down that can be done on demand. How do you feel about white toner printers these day?

@mounirhachem8733 Жыл бұрын

White toner. Stay away for garments. I had one. Lots of restrictions and solid printed areas crack. Better off buying transfers like Big Brandoh does. In general you will pay $3 a square foot.

@williambermudez204 Жыл бұрын

@@mounirhachem8733 That works for large orders. I need something for small orders under a dozen shirts. Plus I can use the white toner printer for many other things other than shirts.

@ahatzigiannidis Жыл бұрын

Man I worked a print company where the printer was $120k and that thing broke down on a daily basis. And they needed to have a guy come in and fix it too, not cheap. It wasn't worth it in the end. But if you got someone to work it and fix it then that's the way to do it.

@ImportThread Ай бұрын

Kornit huh?

@seventhgod9786 11 ай бұрын

I learned the same lesson, but with White Toner printers. Expense lesson.

@USAcumbia Жыл бұрын

Yessir nice

@cindymelendez5143 Жыл бұрын

Hey ! Great videos and thanks for ring transparent as always. Just to be clear, you do not have dtg, white toner printer nor dtf equipment? You only use vinyl or Supacolor transfers, correct? I am new to all of this and don’t want to waste more time and money, thanks for your advice in advance.

@BigBrandoh Жыл бұрын

i use transfers and a heat press to run my business. my vinyl cutter is only used for trial and error. meaning i only cut out vinyl to test out designs. thats all.

@weldrclothing8369 Жыл бұрын

This is gonna be a hit fosho

@robertbrown9785 Жыл бұрын

would love to hear your take on embroidery machines if you do that method

@BigBrandoh Жыл бұрын

take a look around my channel. i have a few embroidery vids.

@strikeforcetracktraining2253 Жыл бұрын

THIS IS HOW I FELT ABOUT MY GRAFTECH MK 60 VINYL CUTTER ABOUT NO TRAINING NO CALLS NO NOTHING THIS IS ABOUT 15 YEARS AGO STILL HAVE CUTTER. GUN SHY TO BUY ANOTHER ONE

@ladycwhite7892 11 ай бұрын

Ur awesome

@IKSRTFO Жыл бұрын

Sup Big Brandoh im an Old Skoo head like u. Only been using Triple A 1301, wut kind of blank are u using on that West Side shirt u wearing? Thanks

@Fixiefre123ak 10 ай бұрын

Different for me DTF printer always leaving it with solution capped it’s been a year and we replaced the print head. But for us it’s been good

@castielvargastv7931 Жыл бұрын

So what is the best kind of printer for guys who want to start a business? Or is it better to let it print by others?

@ACONVOWITHLEGS 5 ай бұрын

what type of shirts you use the quality and the look looks nice

@paulmaina579 Жыл бұрын

Hey man thanks for the info but am already stuck with dtf printer that ain't working

@maryammerbouh2220 11 ай бұрын

💯💯💙

@WanderFilledWorldofMelee Жыл бұрын

Dnt go broke 😂 Thxs brother

@dizzydesignbylovetipton8598 Жыл бұрын

Same thing happen to me with DTF. 😢 i just still paying on it.

@BigBrandoh Жыл бұрын

im hearing this alot since i posted this video. sorry to hear. hopefully you can get yourself out of this hole and get profitable soon

@crisprint2511 Жыл бұрын

depues de echar aperder 2 cabezales! llevo ya casi un año imedio sin ningun problema y acavo de comprar otra dtg! escosa de no darse por vencido!

@evefavorse5939 Жыл бұрын

TFS

@joshuajohnson7238 10 ай бұрын

DTG-C has given a lot of training on the printer I bought from them, but DTG is expensive for sure.

@elijahspencer7495 9 ай бұрын

Is your printer still working.

@claudiaestrada1936 Жыл бұрын

Good evening Brandoh! Is there a company that you recommend here in Miami ( if not) anywhere else to order the Dtf transfers ? And should I order Dtf transfers or Dtg transfers . I don’t know so I can buy a heat press and star making some shirts . Thank you so much Brandoh !!! 😀

@BigBrandoh Жыл бұрын

sorry i dont know any transfer companies out in Miami. the transfer companies i use are linked in the description box. i believe they have east coast locations and west coast locations

@g.ivanovgrozev7050 Жыл бұрын

shit... i was almost convinced!!!

@enviousstylezboutique6023 Жыл бұрын

Hello I have 1 question how do you get your wrinkles out of your tshirts before sending them out or how can I avoid wrinkles when sending the tshirts out because usps some just stuff the package in their bags