This is actually one of the best clear example of how to build a foundation for a shed thank you for your video
@abcando1 Жыл бұрын
Thanks so much for the very nice comment, really appreciate it.
@mauricecarolina9866 Жыл бұрын
Using your video, we built our shed foundation! Other than the sore muscles, it turned out great, and we saved almost $2000! Thank you for sharing!
@abcando1 Жыл бұрын
That is awesome to hear! Really appreciate the comment.
@jwalsh5829 Жыл бұрын
This is exactly what I was thinking for our shed. I couldn't explain my idea to my husband but with your video, it covers everything!!! Thank you so much!
@abcando1 Жыл бұрын
Really appreciate the comments and glad you found the video helpful! 👍
@chrismass9761 Жыл бұрын
Great job...the leftover stone looked great around the hvac unit...great job showing us the process.
@abcando1 Жыл бұрын
Thank you so much, really appreciate the nice comment!
@thinksoft9 Жыл бұрын
Thank you Cando. Feels good to learn from your experience. Helps in my upcoming Tuff Shed installation 🙂
@abcando1 Жыл бұрын
Really glad you found the video helpful. Hope your shed install will go smoothly. 👍
@BoxcarJerry2 жыл бұрын
Hi Armando you did a great job on the base. I like how you covered the AC area with the leftover stone, looks awesome.
@abcando12 жыл бұрын
Thanks so much Jerry! I was wondering how to dipose them off then I thought about it. Not really the landscaping type stone but still looks ok. Take care!
@christopherbatty3881 Жыл бұрын
You really did a great job! Thanks for posting this, really helped me get a picture of how much work this is. Need to get you a bigger wheel barrel!
@abcando1 Жыл бұрын
Thanks so much! Glad you found the video helpful.
@meaningfulgarage4025 Жыл бұрын
Awesome job. I'm in the process of doing a foundation for my new shed. Nice simple detailed information 👌. Thank you
@abcando1 Жыл бұрын
Thank you so much. Hope the video helps in your foundation project.
@jayhays82672 ай бұрын
@4:18 - That's a long piece of rebar to hammer in, Good thing you didn't hit any rocks while putting it in!!
@reggieb532 Жыл бұрын
Best vid on this topic I’ve seen to date 👍🏾👏🏾
@abcando1 Жыл бұрын
Thanks for the comment, really appreciate it!
@Prokaryotes642 Жыл бұрын
Thank you for the explaining your leveling process
@abcando1 Жыл бұрын
Thanks for watching.
@georgiasunbelt2 жыл бұрын
Where ever you live, great soil…I would’ve never got the rebar in without hitting sand stone…you did an awesome job with that foundation
@abcando12 жыл бұрын
Thanks Anthony! I live in Darien, Illinois and you are right, it's good that we can actually dig deep down the soil here easily.
@makeupbygloria11 ай бұрын
I like your handiwork very neat and precise! 👍🙌
@abcando111 ай бұрын
Thanks so much!
@mc-yt2rc2 жыл бұрын
you have a beautiful place! good job.
@abcando12 жыл бұрын
Thank you so much for watching. Really appreciate the comment.
@danbizic610511 ай бұрын
Great video, all I needed for my project.
@abcando111 ай бұрын
Thanks for watching!
@guillermoperez883811 ай бұрын
Wow!! Excellent job!!
@abcando111 ай бұрын
Thanks so much!
@niradn1965 Жыл бұрын
Beautiful job ,very impressive.
@abcando1 Жыл бұрын
Thanks so much!
@pdubs7069 Жыл бұрын
Great job!!
@abcando1 Жыл бұрын
Thank you!
@breadonedon3864 Жыл бұрын
Looks good 👍🏾
@abcando1 Жыл бұрын
Thank you!
@washboardjim Жыл бұрын
Thank you, Great Job.
@abcando1 Жыл бұрын
Thank you so much!
@TheMackizar Жыл бұрын
I'm gonna attempt something like this very soon. My difference is I plan on doing it just a little bit raised, and building it right over the old, broken concrete foundation our last shed had. (There's no saving it, haha)
@abcando1 Жыл бұрын
Good luck on your project 👍
@rajwaran640010 ай бұрын
Great video!
@abcando110 ай бұрын
Thank you!
@KostasLazanas Жыл бұрын
great job!
@abcando1 Жыл бұрын
Thank you!
@pdrrengineer14042 жыл бұрын
Excellent work as usual Armando. It looks like you will have just what you need to keep your shed on the level. What sort of floor will the shed itself have?
@abcando12 жыл бұрын
Thank you Art! The shed would normally have OSB plywood flooring on galvanized joists, For a $100 more and to protect it from moisture and insect damage, we upgraded to pressure treated decking. It has some kind of resin finish on top so it looks nice without having to paint it.
@salvadorvalladolid20762 ай бұрын
Good job. Very helpful thx
@abcando1Ай бұрын
Thanks for watching!
@craziedae Жыл бұрын
Looks great
@abcando1 Жыл бұрын
Thank you!
@robinreul7729 Жыл бұрын
I just put in a gravel pad using crushed limestone also. Since there is no fines in it (for drainage sake) I’m wondering, when they put your shed on the gravel, did the shed runners make a ditch-like indentation in the gravel? Since the clean stone doesn’t compact as well as other rock I’m just worried about it flying everywhere when they drag the heavy shed onto it.
@abcando1 Жыл бұрын
My shed was built/assembled on site so I would say the gravel didn't get disturbed in the process. But even if you get a pre-built shed, they would normally deliver it on wheels and just lay it down on site so I would think the gravel displacement will be very minimal.
@DruSteel692 жыл бұрын
No underground bunker? Ha ha Awesome job? Armando. Extra space is always nice. Enjoy your new shed soon.
@abcando12 жыл бұрын
That would have been a much cooler project, Drew. 😀 And yes, I can use more space for clutters. Thanks and have a great week!
@sgnt93372 ай бұрын
Nice job!
@abcando12 ай бұрын
Thank you!
@treadway1015 Жыл бұрын
Great video. You mentioned using 12 ft 4x6 boards and the shed is 10x12. If the site is slightly larger than the shed, how did you get the 12ft boards to work for your site?
@abcando1 Жыл бұрын
I used the 12 ft boards on the short sides and added about 2 ft extensions on the long sides. The notched cuts on the timber were used to extend the long sides to about 14 ft.
@robjennings7502 Жыл бұрын
Great work! I need to do something similar for my shed, roughly the same size as yours. How long did it take for you to dig the soil?
@abcando1 Жыл бұрын
Thank you! I actually scheduled a whole day just for digging. I wasn't rushing it and it was making me feel tired easily so I was taking lots of rest in between. 😊
@easyday808 Жыл бұрын
can you post a list of all your items / supplies for reference.
@johnbankston72 Жыл бұрын
Awesome job! Two questions: 1. You said materials was $700 in an earlier comment. Does that include renting the plate compactor and any other tools rented or purchased? 2. Before deciding to do this project yourself, did you get a quote to contract out this work? I’d be curious in what the contracted price was versus your true total cost, to see what the savings were by doing this yourself.
@abcando1 Жыл бұрын
Thank you. I would add the $70 compactor rental to the amount. I own all the other tools that I used so no more added expenses on those. The $700 approximately would be for the lumber, stone, weed barrier, wood preservative and screws. I actually got a quote before deciding to do it myself and it was for $2500. I thought it was too much and the guy was talking about doing it differently compared to how I would like it done as I've wached in several videos so I decided to do it myself.
@brandonojeda3802 Жыл бұрын
Hi, did the $2,500 quote include all material or was that the price just for the labor?
@abcando1 Жыл бұрын
That was total for labor and materials.
@jeffhopper3526 Жыл бұрын
good job, thanks!
@abcando1 Жыл бұрын
Thanks so much!
@garygrasso48712 ай бұрын
Very nice work. Thanks for sharing
@abcando12 ай бұрын
Thank you!
@ZackofAllTrades87 Жыл бұрын
Very nice!!
@abcando1 Жыл бұрын
Thanks so much!
@Seven7ails Жыл бұрын
Good job Uncle 👍🏽! Ayos
@abcando1 Жыл бұрын
Thank you! 🙂
@jacktracks707 Жыл бұрын
Great video. Also watched the install video. Do you remember how much this was in materials for the base only?
@abcando1 Жыл бұрын
Thank you so much. I would say the material cost would be around $700.
@lanceraustin Жыл бұрын
This is very thorough and informative, thank you! There are just a couple details of your build which need clarification. For me, these center around the design and construction of your timber frame. At 2:42, it appears you have cut a notch in the timber. - The timber looks tall; but is this actually just one of the 4 x 6es? - If so, did you cut at the 3-inch mark?
@abcando1 Жыл бұрын
The frame is entirely made of 4x6 lumber. The notches are for the joints to extend the long side of the top lumber to about 14 ft. The bottom lumber on the long sides didn't have to be extended as part of it is buried underground. The 4x6 is actually 3-1/2" × 5-1/2" so the notch is cut at half of 5-1/2" or 2-3/4".
@lanceraustin Жыл бұрын
@@abcando1 Thank you very much!
@Benjix132 жыл бұрын
Great job. That’s the exact shed I’m installing in a few weeks. How big did you make your gravel pad?
@abcando12 жыл бұрын
Thank you! It is about 12 ft x 14 ft. I used 12 ft long boards on the shorter sides and added about 2 ft pcs on the longer sides.
@Benjix132 жыл бұрын
@@abcando1 thank you
@robertwarren8313 Жыл бұрын
I will have a go to don’t myself sometime this week
@abcando1 Жыл бұрын
Good luck on your project 👍🙂
@kimh1733 Жыл бұрын
This is great. I am going to do this very soon. Question---Do I put crushed gravel under the timber before leveling as well? Or just lay the timber on the excavated dirt? thanks
@abcando1 Жыл бұрын
I laid the timber directly on top of the dirt like most of the videos that I've seen. Some would suggest to also put gravel under the timber for added protection against wet dirt.
@kimh1733 Жыл бұрын
@@abcando1 thanks!!!
@davidsmith-zr6wr2 жыл бұрын
Hi, I have a plastic shed from lowes and I want to do a gravel base as well. Can the plastic shed sit directly on top of the gravel or should there be something in between the gravel and shed floor?
@abcando12 жыл бұрын
The plastic shed can sit directly on top of the gravel pad. But being that plastic sheds are more sensitive to misalignment, the gravel base would really need to be well leveled and compacted.
@wakawaka197610 ай бұрын
How level was your ground before laying the gravel? Was it basically perfect? I’m lazy and was wondering if it’s close (few inches here and there) that’s fine because you can just even things out with the gravel.
@abcando110 ай бұрын
I just tried to roughly follow the level of the timber borders for the dirt inside, then tamped it with the hand tamper.
@VinMotors0613 Жыл бұрын
Good Job Kuya!
@abcando1 Жыл бұрын
Thank you! 🙂
@moreblankets Жыл бұрын
Is the rebar not overkill? Considering that there will be tons of gravel inside, the frame shouldn't be able to move. Any answers are appreciated!
@abcando1 Жыл бұрын
In my opinion, it is the weight of the gravel and the shed constantly pushing on the timber frame that may cause movement of the timber, the reason why you need the rebars.
@TC-tw5zk Жыл бұрын
Great info, what number/type of gravel did you use? Looks like it was washed too
@abcando1 Жыл бұрын
Thanks. It was 3/4" washed limestone gravel.
@TC-tw5zk Жыл бұрын
@@abcando1 thank you
@blkmacster Жыл бұрын
Beautiful
@abcando1 Жыл бұрын
Thank you!
@wakawaka197610 ай бұрын
Does the compactor make a big difference or can I get by with one of those hand ones? I’m needing to build a foundation for a resin shed 8’x15’
@abcando110 ай бұрын
I would recommend the plate compactor to prevent the base from settling overtime.
@jomyjoseph1294 Жыл бұрын
Thanks for this video, very useful for people like me. Question : Wouldn't putting the weed barrier slows down drainage? Since you are putting gravel, wouldn't it be enough to block the weeds?
@abcando1 Жыл бұрын
To be honest, I'm not really sure how deep should the gravel pad be for it not to grow weeds without the barrier. My pad has gravel areas that are just about 5" deep and I just thought that adding the barrier would be a good idea. I also believe that it should not have any problem draining the amount of rain water that it will get.
@lanceraustin Жыл бұрын
@@abcando1 Hey Cando, is 5" the recommended gravel depth? I'm trying to plan the correct amount of dirt to excavate, and amount of gravel to order. I'm not sure what depth is too much, and what is too little.
@abcando1 Жыл бұрын
The 4x6 lumber is actually 5-1/2” on the wider side, so I guess you can do 5” to 5-1/2” depth if you’re not laying gravel under the lumber. I’m not sure if there is a recommended depth of gravel for the pad.
@walterbrob9 ай бұрын
Weeds need sunlight to grow. There wouldnt be aby under the shed
@lanceraustin9 ай бұрын
@@walterbrob Oh, yes they will. Even without the base being a greater area than the shed (1 ft. of exposed gravel around the entire perimeter), weeds would find a way. But this application of landscape fabric isn't really for weed control, it's for stabilization of the gravel base; establishing a barrier between it and the dirt beneath.
@GaryMcKinnonUFO2 жыл бұрын
Hi, thinking of doing this myself rather than a concrete base. At 1:54, what is the bent-spade looking tool on the left called ? Thank you :)
@abcando12 жыл бұрын
Hi Gary, thanks for watching. It's a garden hoe, very useful tool for gardening. Take care. 🙂
@GaryMcKinnonUFO2 жыл бұрын
@@abcando1 Thank you :)
@marktajonera8106 Жыл бұрын
Hello Armando! Just wanted to ask how you did the half lap joints? I think you did an excellent job on the base and I got really inspired by you to build one myself. Salamat!
@abcando1 Жыл бұрын
Hi Mark, I just screwed using 2 of the 4" long screws on top of the joints. Of course, pre-drilling is important so they won't crack. I also drove a rebar in the middle of each of the short extension wood pieces to reinforce them. Thank you din. Ingat!
@donamills Жыл бұрын
How did this hold up after a YR? And does it freeze in the winters where your at?
@abcando1 Жыл бұрын
It's holding up pretty good, and yes, it does freeze here in Illinois.
@dickiegreenleaf7505 ай бұрын
I must really be a lazy person but this looks like a nightmare!
@easterlake7 ай бұрын
Did you think it would also help to have gravel under your surrounding frame?
@abcando17 ай бұрын
I believe it would be helpful to prevent the wood from touching the wet soil for extended period of time.
@wakawaka197610 ай бұрын
Is the digging mainly to get rid of the grass and major sloping?
@abcando110 ай бұрын
Yes
@promero9292 Жыл бұрын
Sir, I ordered the same 10' by 12' shed as you did. Now when you made the foundation frame 10' by 12' was there any problem with the shed being to big to fit the 12' length? Our Home Depot only carries 12' pre treated 4X4 lengths.
@abcando1 Жыл бұрын
The gravel pad frame dimensions are actually 12' x 14'. I used 12' long 4x6 lumber on the short sides and added 2' long pieces on the long sides.
@promero9292 Жыл бұрын
@@abcando1 Got it! Thanks for the Speedy Response greatly appreciate it!
@RealRell1 Жыл бұрын
Nice work. I have a question, I see some parts of your timber under the ground level. Did you only bury them up to a specific point to level them and not the entire length or width ?
@abcando1 Жыл бұрын
Thank you and yes, that would be correct. I wanted the top surface of the timber on the front side of the shed to be a little higher or almost the same level as the ground, then I leveled the rest of the timber border based on it. I was lucky to have enough lengths on the lower buried timber that will cover the visible sides on the ground.
@RealRell1 Жыл бұрын
@@abcando1 so as for the sides of the shed base, you cut the timber and on partially buried it. It looks like, for example, if it was 12 feet long, you only buried 6 feet on a slope on each side of the shed and then stacked another timer on top the entire length. My apologies for the rhetoric.
@abcando1 Жыл бұрын
That's right, the lower level timber on the sloping sides didn't run the whole length of the border, just long enough where it won't show any visible gaps looking on the sides.
@RealRell1 Жыл бұрын
@@abcando1 thank you thank you.
@jasontsabunimt66808 ай бұрын
Did you put gravel under the frame before the tarp or just on the bare ground?
@abcando18 ай бұрын
The wood frame is placed directly on top of the soil but can also be good to put gravel under it.
@hungtsan97333 ай бұрын
How deep did you dig your base?
@jcontradiction Жыл бұрын
is 5 ton about 4 yrds of 3/4 crushed rock?
@abcando1 Жыл бұрын
I believe that would be correct.
@timmack24152 жыл бұрын
Nice job 👍🏼
@abcando12 жыл бұрын
Thanks so much!
@lifengwang5847 Жыл бұрын
May I know your foundation size? external 12x10? Or bigger than that?
@abcando1 Жыл бұрын
The gravel pad is about 14x12. The shed is 12x10.
@Kurt9099 Жыл бұрын
HI Canado, Thank you for the great video. I'm building a 15x23 shed pad and your video is helpful. I was reading that #57 granite stone was the best for the shed foundation. Do you recommend the limestone gravel instead?
@abcando1 Жыл бұрын
I read that 3/4" washed gravel is best for the shed pad when I was planning on doing mine. The 3/4" washed limestone gravel is the one available at my local landscaping supply and that's what I used. Not really sure about granite stone but it seems like it can be used for the same purpose.
@Kurt9099 Жыл бұрын
@@abcando1 Thank you!
@jcontradiction Жыл бұрын
how well does the gravel compact or lock in together? I just built one and the gravel don't seem to compact or lock in together.
@abcando1 Жыл бұрын
I think it compacted pretty good. I made sure I did several passes of the plate compactor around the entire pad.
@colinwood1337 Жыл бұрын
Whatever you use the stones need to be irregular in shape so they lock together. Shingle isnt great because the stones are too smooth washed by the sea as they are.
@jcontradiction Жыл бұрын
@@colinwood1337 crushed stones need to be not only irregular but it should contain mixed sizes with dust. my mistake is just getting 3/4" crushed stones without dust and other sizes. You need to get "crush run"
@colinwood1337 Жыл бұрын
@@jcontradiction agree irregular shapes AND sizes. Not sure about fine particles - i mean rain soon washes dust out of railway ballast?
@user-bj1pi8xs3y3 ай бұрын
How much gravel did you order?
@disciple7778 ай бұрын
Hi , what is the legnth of the Auger bit that you used?
@abcando18 ай бұрын
It’s 18” long
@thejuanmvp4 ай бұрын
Did you cut the wood on an angle?
@abcando14 ай бұрын
No, I did not do any angle cuts on the wood.
@GeneralRock1143 ай бұрын
What’s to stop the wood base from rotting???
@abcando13 ай бұрын
They are pressure treated ground contact rated wood which resist rotting.
@GeneralRock1143 ай бұрын
@@abcando1 Thanks.
@VIKING10119 ай бұрын
I don’t get it. The wood will rot?
@abcando19 ай бұрын
It’s pressure treated.
@pvs108 Жыл бұрын
So gravel base is enough . We don't need cement base?
@abcando1 Жыл бұрын
Yes, that's correct.
@anonymousgenre Жыл бұрын
Nice but too many procedures, tools, materials, costs, etc.
@abcando1 Жыл бұрын
Thanks for watching.
@sheng-yuyuan14618 күн бұрын
Can I use 4x4 not 4x6 timber?
@abcando118 күн бұрын
I prefer the deeper gravel depth using 4x6 timber.
@ascar1469 Жыл бұрын
Do you have to remove the grass?
@abcando1 Жыл бұрын
Yes I did.
@ascar1469 Жыл бұрын
I want to use a geotextile fabric on top of the grass then place stone. Will that still work? Or do you have to remove the grass?
@abcando1 Жыл бұрын
I was also wondering about that before I did the project because it's hard work. I just thought that not removing the grass and roots may not enable the soil and stone to compact very well which may cause movements when they die later on.
@ncmor3678 Жыл бұрын
Isn't it cheaper to just do a DiY concrete pad?
@abcando1 Жыл бұрын
I believe a concrete pad will be more expensive and more labor intensive. I also just prefer doing the work involved in a gravel pad installation compared to a concrete pad.
@nathanaelsegura2535 Жыл бұрын
2:55
@joseperezpaz998610 ай бұрын
Looks expensive
@breadonedon3864 Жыл бұрын
😅
@briannaboudreau3410 Жыл бұрын
I’ll pay you to build me one! lol
@abcando1 Жыл бұрын
Thanks but I'm not sure if I would want to do it again 😄
@titarhea662 ай бұрын
Dennis found your video and he is copying what you did thank you great job!
@abcando12 ай бұрын
Thanks so much, Rhea! Hope you’re all doing great! Regards to everyone! 🙂
@larala6815 ай бұрын
I bought this because I did not have a clue about the design, materials composition and building of a shed. kzfaq.infoUgkxb2mhCug-GkCWrq69Ce2I0nM0D4QpxAquIt is absolutely fascinating, with clear, readable text and helpful illustrations also enough videos. There is a great sense of creativity and enthusiasm underlying the projects which the authors develop, from a bike shed to a glorious eco-shed. I like the way explanations are provided for decisions made from a range of options. I am not really in a position to rate the more technical detail, but think I am prepared to boldly go shed- building, equipped with this manual.
@abcando15 ай бұрын
Yes, they do
@JD2CYLINDERNUT Жыл бұрын
With all due respect, you’ve worked hard and paid close attention to detail…….but this is completely unnecessary for a portable barn/shed built on treated skids. Not to mention it would have been cheaper and quicker to have a cement pad poured. We’ve hauled these barns for one of the biggest players in the industry for over ten years and after too many warranty issues including moisture damage and settling the rock pad is NOT the way to do it. Always buy a barn that is “engineer certified” and follow the blocking chart. Solid cement blocks under the skids reduces settling and eliminates any moisture transfer long term. Put a 4x8x16 solid cap block 5’ feet apart maximum under all the skids. Anchor it. Then if you don’t want to see blocks and anchors skirt the building with lattice or something that breathes. We’ve actually seen these rock pads with lumber frame around it create a tub effect and hold water.
@abcando1 Жыл бұрын
Thanks for sharing your thoughts on the video. Our town permit requirements actually mentioned not to use cement blocks for foundation and only concrete or gravel pad is allowed. I do not see it to be quicker, cheaper, not to mention easier mixing concrete all by myself even if I rent a concrete mixer to build the pad. I would have gone the concrete pad route if I believed it otherwise.