How I Made a Homemade Bead Blaster To Inflate Tubeless Tires

Рет қаралды 42,997

Күн бұрын

In need of a bead blaster/ bead seater, I decided to build one by utilizing leftover parts in my garage. I'll show how this is done, one step at a time, and hope you enjoy watching.
A bead blaster delivers a large volume of highly pressured air into the cavity of a tubeless tire to help "seat the beads" of the tire to the wheel assembly. Many tubeless tires have extremely stiff sidewalls and the beads of these tires will not seat properly by just pumping air through the valve stem.
From my garage, I'll show you how to repair medium to heavy-duty trucks and trailers, including maintenance, air brakes, tires, driveline, steering and suspension, and overhaul and engine rebuilds.
I will also be posting videos where:
-You will see how I resolve truck and trailer related issues, steering, transmission, rear end etc.
-I'll repair components such as doors, floors and side panels.
-I perform general or routine welding.
Hope you enjoy!!!
How to Connect an Air Impact Wrench Directly to Your Truck
• How to Connect an Air ...
How to Mount and Dismount a Truck Tire With Pry Bars in 10 Minutes
• How to Mount and Dismo...
How to Diagnose and Prolong the Life of a Worn Kingpin (Bolted) in 15 minutes
• How to Diagnose and Pr...
How to Paint a Truck Wheel In 10 Steps
• How to Paint a Truck W...
How to Change a Truck Tire With an Air Impact Wrench
• How to Change a Truck ...
How To Regroove a Truck Tire
• How To Regroove a Truc...

Пікірлер: 20

@cardinalfang7725 3 жыл бұрын

You gotta love this guy's shop.

@tomduncan1970 6 жыл бұрын

That is great. Guess this is on my "To Do" List now. Trying to seat a head headed bead will drive you nuts.

@sweenydeeny5821 Жыл бұрын

Good stuff

@titogonzalez3119 6 жыл бұрын

Man I like this idea!!! How reliable is it lol .. great job on detail

@user-qm9yo4hn2f Жыл бұрын

뭘 바르시는거예요?

@Quentyn73 6 ай бұрын

Is there a safety valve on this thing?

@bennydykes7256 15 күн бұрын

Yes the storebought versions come with a pressure guage.they are great tools for what they are made for in the shop

@riderclub0179 5 жыл бұрын

Where is pressure gauge too dangerous

@juizzii386 4 жыл бұрын

Why would you even put a pressure gauge there? You can see the pressure from the compressor's gauge. Daa

@intruderIG 5 жыл бұрын

Looking for Americans writing comments about PPE

@twagner6155 3 жыл бұрын

Depends on your comfort level. I grew up in the 60's with little to no equipment. Use common sense.

@AutoGu 6 жыл бұрын

very skillful man, but not suggested to do this, no safety valve, no pressure meter, very dangerous while using it.

@roberttill3787 5 жыл бұрын

Gu Derek, i totally agree, but also a safety valve and a pressure gauge could easily be designed into the tank

@jfjjjjfj 5 жыл бұрын

And no safety guard on the angle grinder, just in line with the tank safety ;-)

@joshdenham8404 6 жыл бұрын

You forgot to mention to NEVER weld on a pressure vessel until you're positive there is no residual flammables left in it. You can accomplish this by filling it to the very top with water. Then, and only then are you safe to weld.

@roberttill3787 5 жыл бұрын

the video states its made from a truck air reservoir, so there has never been anything other than air inside it. I do agree with you if the tank being used has previously had flammables in it.

@intruderIG 5 жыл бұрын

Isn't that the common sense. Who already doesn't know that shouldn't even be close to the tools.

@sirsweetness8332 4 жыл бұрын

ilhan G Cannot assume common sense

@user-bo7ew2mp7d 11 ай бұрын

I used exhaust for 3 minutes to displace the oxygen content to weld on gasoline auto tanks