How I made this Travel Friendly Victorinox Traveller
Рет қаралды 133,748
2 жыл бұрынHope you enjoyed that build video! Let me know if you think this build would be TSA approved. Is this one more likely to pass than the previous one that I made?
My Website:
f2scustoms.com/
My Instagram:
/ fit2survive_
Links to the tools and parts for this video:
Victorinox Traveller Lite: amzn.to/3LJBX4t
Havalon Scalpel: amzn.to/3uZ2Onj
4mm Brass rods: amzn.to/3JECIdd
Music from purple-planet.com and
Uppbeat (free for Creators!):
uppbeat.io/t/richard-smithson...
License code: VDVURCZ02BIDWVDF
uppbeat.io/t/ra/keep-going
License code: XSXIGQYBMF64GEI6
uppbeat.io/t/hartzmann/sunny
License code: R2KWUYG5DGESAA9S
uppbeat.io/t/northwestern/hom...
License code: TEVAW3JY0XPMITEP
uppbeat.io/t/northwestern/hom...
License code: TSCPFY84JETX75ZT
uppbeat.io/t/sky-toes/the-lon...
License code: OCGKEOIOR88BTYW1
uppbeat.io/t/northwestern/pie...
License code: WSXJZTUDC1Y4VVL4
uppbeat.io/t/sky-gienger/gently
License code: CCDFKMUX2SM79BRS
uppbeat.io/t/sky-toes/straigh...
License code: BTBXUK8EV5AOYISE
uppbeat.io/t/northwestern/som...
License code: DDTYPYY3A9FXCJO2
@CharlesHeller 2 жыл бұрын
Scissors with blunt nose are supposed to be ok per TSA, BUT... Always travel with a self-addressed stamped priority mail envelop on board, so that they can mail it to you rather than confiscate it. NEVER let them "take" it. Also a good idea to download TSA rules, print and highlight them for distribution to the "unwise" officer who doesn't know the rules.
@FittoSurvive 2 жыл бұрын
There are several things that "should" pass TSA, but the self addressed envelop is definitely the best contingency plan.
@tikkidaddy Жыл бұрын
Unwise or just a theif
@JokerInk-CustomBuilds Жыл бұрын
Anything to save a beloved custom edc tool! :D
@Vpentrov Жыл бұрын
They just let you do that? Did they ask any questions?
@cecilm3720 Жыл бұрын
That’s actually a great idea. They might still “forget” to mail it, but better a slim chance than an outright confiscation. (I got an empty lighter confiscated, even though TSA rules were clear that it’s OK to pack.)
@cheryl6222 4 ай бұрын
I liked the comment about "travel with a self-addressed stamped priority mail envelop". I like your video. You are very through to show even the battery compartment
@FittoSurvive 2 ай бұрын
Good. glad you liked it.
@michaelkeller5008 Жыл бұрын
saddest thing when travelling - for me as a swiss - is you have to leave your SAK at home (you never know when it is legal to carry it around in the destination-country) it's realy a shame that victorinox doesn't come up with a solution like this for their Traveller series on their own. luckily there are people like you doing this :)
@FittoSurvive Жыл бұрын
Yes, that is quite unfortunate. Especially when traveling around Europe. It would be super awesome for Victorinox to make a bladeless 91mm model.
@michaelkeller5008 Жыл бұрын
@@FittoSurvive well for the 91mm i'd like the option to remove the blade. Like it is possible with the tools on the rescue tool... a bladeless 58mm (like the minichamp, just without blades) would be fantastic to travel...
@FittoSurvive Жыл бұрын
@@michaelkeller5008 Exactly! A bladeless Minichamp or MiniChamp Jetsetter would be fantastic for traveling.
@michaelkeller5008 Жыл бұрын
@@FittoSurvive most defenetly! Btw - do you know a customizer in Switzerland who could make the Rescuetool into "41a compatible" (german weapons-law, article 41a. the most restrictive in europe - a knife legal by 41a is legal everywhere in europe)? (replacing the onehand-blade and linelock with a twohand-blade without lock)? Victorinox can do it but charges more than the 41a-compatible but discontinued version of the rescue-tool did cost...
@FittoSurvive Жыл бұрын
@@michaelkeller5008 I do not know of any customizers in Switzerland unfortunately. 🤔
@anniegogogone1806 2 жыл бұрын
Great build. If i couldn’t fly with that, i would never give it up…. Cancel that flight! LOL.
@FittoSurvive 2 жыл бұрын
😊 Thank you!!
@rogerhudson9732 2 жыл бұрын
Don't knives fly in hold luggage ?
@doubledrats235 Жыл бұрын
For a knife like that I would put it in checked luggage or travel with a stamped and self addressed bubble wrap envelope and mail it to myself from the airport if the TSA gave me grief. I had a Compact SD SAK on my key ring when I travelled back and forth many times between NYC and Orlando and never had an issue. Until one day when I tossed my keys into the bin to be X-rayed and the loud clunk alerted a TSA agent. She opened the knife and said the sharp blade was not allowed in carry on. My wife gave me a dirty look since she didn’t want to miss the flight so I gave up the knife and bought a new one for $20 when we got home. I heard that the TSA sells some confiscated items. I wonder if they pocket some nice ones. I now put my SAK in checked luggage.
@orenmontgomery8250 Жыл бұрын
Yeah, at that point it would be reschedule and mail it because I'm not handing that over.
@l.nassah6728 2 жыл бұрын
It's as if the Havalon was meant for SAK, just the perfect fit, Imagine a surgeon/paramedic/doctor/nurse orders one of these custom from you and happens to use it in an emergency situation.... That would be the epitome of EDC usefulness! Awesome work as usual! I thought TSA doesn't allow anything sharp edged or pointy ? That goes for the can opener, scissors, corkscrew yes hmm, intresting to know they aren't
@matthewstrunk605 2 жыл бұрын
The Transportation Security Administration currently states that corkscrews without blades are acceptable in carry-on bags, while those with small blades must be placed in a checked bag (as with any sharp object, they prefer it be sheathed or wrapped to prevent baggage handlers and inspectors from being injured). Scissors, if packed in carry-on, they must be less than 4 inches from the pivot point. Any sharp objects in checked bags should be sheathed or securely wrapped to prevent injury to baggage handlers and inspectors.
@petruf8305 2 жыл бұрын
The scissors should not be a problem with airport security, the corkscrew is more of a grey area, and it can be down to the agent’s judgement. Awesome build as usual :)
@edwardfletcher7790 2 жыл бұрын
It not only depends on the Airport but the individual inspecting you. Remember, these idiots have confiscated nail clippers in the past !!😠
@FittoSurvive 2 жыл бұрын
Interesting, I didn't think about the corkscrew causing trouble. But yeah, it all comes down to the decision of the TSA agent inspecting you.
@FittoSurvive 2 жыл бұрын
Yeah... I've seen that happen before. It's mad. I can see the news headline: "Airplane taken hostage by terrorists wielding deadly nail clippers."
@matthewstrunk605 2 жыл бұрын
The Transportation Security Administration currently states that corkscrews without blades are acceptable in carry-on bags, while those with small blades must be placed in a checked bag (as with any sharp object, they prefer it be sheathed or wrapped to prevent baggage handlers and inspectors from being injured).Scissors, if packed in carry-on, they must be less than 4 inches from the pivot point. Any sharp objects in checked bags should be sheathed or securely wrapped to prevent injury to baggage handlers and inspectors.
@radamspse Жыл бұрын
I had a Victorinox credit card combo confiscated once. As you know the knife is miniscule and the scissors are quite small as well. I just stood there in disbelief, next they will confiscate paper clips and hair clips!!!
@andreasweber7828 Жыл бұрын
Hairdryer instead of soaking in water works a charm
@FittoSurvive Жыл бұрын
Good idea. 👍🏻👍🏻
@hitchpost5822 2 жыл бұрын
What a great build ! , I don’t know if you or the customer came up with that idea but it is genius. Now if some over zealous TSA agent doesn’t take it away. There should be away to submit tools to an authorizing board or person that would issue a permit authorizing the item to be carried onboard an aircraft.
@FittoSurvive 2 жыл бұрын
Thank you!! 😊 Yeah, that would make sense for there to be a way to get a tool certified. 🤔
@andrewvautour1795 5 ай бұрын
That sior was awesome! I LOVE THE SCALPLE and not only for travel, it is just a great idea!
@FittoSurvive 2 ай бұрын
It really is!
@JokerInk-CustomBuilds Жыл бұрын
Just ordered online: Multitool ferric acid brass sheet Making 3d printed custom scales without corkscrew cutouts but a custom needle placement. -and I am making deepcarry pocketclip on the backside if I can. -This is gonna be a fun project, I am gonna "TSA" a victorinox cybertool. I wanna do just bitdriver, scissors, pliers and a scalpel holder. Thanx for the inspiration andf awesome videos!
@FittoSurvive Жыл бұрын
Cool! Sounds like it is going to be an exciting project! 👍🏻👍🏻 Best of luck with it.
@JokerInk-CustomBuilds Жыл бұрын
@@FittoSurvive Can I ask what springs you used for your havalon scalpel mod? You didn't mention what kind they were in the video...🤗 -
@kismitscorner 7 ай бұрын
Did you ever figure out what springs to use? I was going to ask the same question. @@JokerInk-CustomBuilds
@JokerInk-CustomBuilds 7 ай бұрын
@@kismitscorner yes, it is two saw springs placed side by side...☺️
@kismitscorner 7 ай бұрын
Awesome! Thank you so much! @@JokerInk-CustomBuilds
@dennisajones9352 Жыл бұрын
U use another knife too disassemble the other one? Ahhh! Learning everything! It’s amazing! What a useful and productive way to reconfigure and then construct another!
@FittoSurvive Жыл бұрын
Yeah, kind of ironic, isn't it? 😅
@jeffslaven Жыл бұрын
Really nice build! I'm surprised that Victorinox doesn't offer something similar.
@FittoSurvive Жыл бұрын
Thank you! Yeah, it'd be cool if they did make something like this that would be readily available.
@makr7895 Жыл бұрын
They have a "kniveless knive", the Jetsetter, I think, but of course none with an exchangeable lade as far as I know.
@FittoSurvive Жыл бұрын
@@makr7895 You are correct.
@thecrakmasta 4 ай бұрын
That scalpel Holder thing is pretty cool
@FittoSurvive 2 ай бұрын
Can agree with you on that
@xiaoyu88 Ай бұрын
Jetsetter is the answer, but I every time I fly with it I get those looks from my travel buddies/ground team. But I don't want to check my bag and I don't want to travel without it. Last time I just checked my bag at the last minute. hate it lol
@FittoSurvive Ай бұрын
Yeah, I completely understand you.
@xiaoyu88 Ай бұрын
@@FittoSurvive I had an alox classic sd I bought in Germany and did not want to lose it after going through the post office and it was closed to mail it to myself, it was a good trip and I wanted to have it with me. My "modded" (with the scales you helped me get from AliExpress back in the day) Compact stayed home safe. Also, I do plan to order one from you one day, and make it travel friendly, but as I come to think about it, I would never risk losing it to some idiot who has a bad day. Quick question, I know you modified some Lethermans, do you have maybe lying around some Style PS, or more importantly, a few tweezers from a CS/PS?
@sadmageboi472 2 жыл бұрын
I've been looking into those lots of viccys from the TSA just to practice on because of this channel, amazing work today my guy!
@FittoSurvive 2 жыл бұрын
Yeah, hopefully this knife doesn't end up in one of those Ebay lots... 🤣🤣🤣I'll have to keep my eyes open for it. 😝
@matthewstrunk605 2 жыл бұрын
One word “absolutelytotallyawesome”. Stellar factor of 100 my friend.
@FittoSurvive 2 жыл бұрын
Just one word, huh? 😉 Glad you found the video, I meant to send you the link to it. 👍🏻
@volodymyrrudoman Жыл бұрын
Awesome idea to address the blade issue! I also like leatherman for kids with detachable blade. Love that you've polished those aluminum plates - it looks way cooler now!
@FittoSurvive Жыл бұрын
Thank you. I appreciate it.
@70RD 2 жыл бұрын
Your videos are therapeutic.
@FittoSurvive 2 жыл бұрын
😊 Thank you! I am thrilled to hear that!
@scipio7837 11 ай бұрын
Beautiful work
@FittoSurvive 11 ай бұрын
Thank you!
@alexleon619 2 жыл бұрын
Хорошая идея. Качественная работа ! Спасибо за видео. A good idea. High - quality work ! Thanks for the video.
@FittoSurvive 2 жыл бұрын
Спасибо! Я это ценю. 👍🏻👍🏻
@lHaveFeet 2 жыл бұрын
Your videos are always so interesting
@FittoSurvive 2 жыл бұрын
Thank you! Glad that you enjoyed it!
@Kleiner_Lutz 2 жыл бұрын
While I do enjoy your short videos where you show the finished product, I really like these longer videos where we can see what exactly you did. Good job, keep it up 😉
@FittoSurvive 2 жыл бұрын
Hey! Glad that you enjoy them both. The build videos take me about 5 to 6 hours just to edit. 🤣 Thanks!
@Kleiner_Lutz 2 жыл бұрын
@@FittoSurvive yeah that's what I guessed too, don't worry about it
@Ukhov_Hiking Жыл бұрын
Hi! Great job, you are a knife wizard!!!
@FittoSurvive Жыл бұрын
Thanks a bunch! I really appreciate it.
@jorgecontini5187 2 жыл бұрын
Good idea . Excelent . Congratulation!
@FittoSurvive 2 жыл бұрын
Thank you! I appreciate it.
@seven7ns 4 ай бұрын
Very good built. Why has Victorinox not think of it. Maybe they could an special flyers tool wit lots of other nice tools in it.
@justingere1824 2 жыл бұрын
I feel like what you added is how that knife should come.
@FittoSurvive 2 жыл бұрын
Right? It would make sense.
@thomaschainey533 6 ай бұрын
Great video, thanks. Good job on the build. It would probably be ok on plane. I do not know if you can get into an airplane with it or not that all depence on TSA. But the scissors, although not a deadly weapon, in the right hands if used right can and are deadly. The can opener can be deadly.
@FittoSurvive 6 ай бұрын
Thanks! Theoretically everything on this build fits the requirements on TSA's website, but even that doesn't guarantee that the TSA agent inspecting you will let it pass. Yep, even a pencil in the right hands can be a weapon.
@tsc4945 2 жыл бұрын
That mod is awesome, i also do some SAK mod but what you do is entirely in a different level 👍
@FittoSurvive 2 жыл бұрын
Thank you! I appreciate that
@orenmontgomery8250 Жыл бұрын
BRILLIANT! Not something I'd crave necessarily, but very cool.
@FittoSurvive Жыл бұрын
Thank you. 👍🏻😁
@groznyneme 2 жыл бұрын
Got me nervous when he opened the scalpel like nobody's business 😬 😅
@FittoSurvive 2 жыл бұрын
😎 No worries.
@blacksquirrel4008 2 жыл бұрын
What got me worried was the machining with the blade installed. If I had tried that it would demonetized for the gore.
@FittoSurvive 2 жыл бұрын
@@blacksquirrel4008 😬 Yeah, I guess that really could have gone wrong. 🤞🏻
@c.a.m.5948 2 жыл бұрын
Great video and build. I fly a lot, and the thing I know about TSA, is there does not seem to be a hard fast. It seems to be at the discretion of the agents.
@FittoSurvive 2 жыл бұрын
Thank you! Yeah, it really does come down to that.
@cyclinder101 2 жыл бұрын
Very inspiring Fit, thanks for the great quality videos. How do you select/remember the spring choice and orientation to match the tools, esp when you etch them?
@FittoSurvive 2 жыл бұрын
Glad to hear that! You are very welcome! When I first started out, I would keep all of the parts and springs carefully in order so that I wouldn't confuse them, but by now. I can recognize the springs and parts easily.
@user-dl1cf4xr6t Жыл бұрын
Thats really cool
@FittoSurvive Жыл бұрын
Thank you!
@willienelsongonzalez4609 2 жыл бұрын
That’s got an alarm clock? Damn!
@FittoSurvive 2 жыл бұрын
It does! And much more in it.
@unfi6798 Жыл бұрын
Love it mate.!
@FittoSurvive Жыл бұрын
Thanks!
@LittleSweed Жыл бұрын
it really depends on who checks you when i traveld to england the scissors was fine but when i travled back home to Sweden the scissors was a huge problem so i had more or less give them my SAK but the guy was awesome and i allways have a envelope/pakage for these kind of problems so i mailed the kinife back home,
@FittoSurvive Жыл бұрын
Yeah, TSA rules are just guidelines, there's no guarantee that a "TSA approved" tool will actually be allowed to fly by the agent inspecting you.
@gopro2804 4 ай бұрын
Please buy a pillar drill. If you need to apply heat to the scales a hot water bottle can apply a lot of heat safely.
@FittoSurvive 4 ай бұрын
Yeah, I really do need to invest in that.
@MrBradaz111 Жыл бұрын
I'm learning a lot from your vids, thanks so much. whats the reason for loosing the keyring? could you have just used that backspring with the corkscrew? it doesnt look like it would foul the toothpick.
@FittoSurvive Жыл бұрын
Great! I am glad to hear that. I could not keep the keyring because the spring where it is located (can/bottle opener layer) was removed and can not be used on the corkscrew layer because the spring is too thin.
@MrBradaz111 Жыл бұрын
@@FittoSurvive ahhh I hadn't thought about the thickness! Thank you. Just got to wait for Xmas to be given my swiss champ, then the fun starts
@My_Name_Is_David 2 жыл бұрын
Love your builds so much. Have you ever considered if a civivi baby banter blade would fit in a SAK?
@FittoSurvive 2 жыл бұрын
Thank you! I have not size up the Civivi. Do you think it would fit?
@My_Name_Is_David 2 жыл бұрын
@@FittoSurvive lengthwise it looks about perfect, but it’s probably too thick (from the edge to the spine) even with modifications to the pivot hole.
@FittoSurvive 2 жыл бұрын
@@My_Name_Is_David Hmmm... That could be a problem.
@fish3977 Жыл бұрын
I would have gone for exacto style blade as those are easier to replace but I dunno where you could salvage a holder from.
@FittoSurvive Жыл бұрын
Fitting an exacto style blade would be pretty complicated.
@CrisGar76 2 жыл бұрын
Amaizing
@FittoSurvive 2 жыл бұрын
Thank you!
@johnlogan4053 4 ай бұрын
It looks like you could have put in something opposite to the scalpel. Nice job.
@FittoSurvive 4 ай бұрын
There's definitely space for something, but the spring wouldn't allow it.
@konradxtofik Жыл бұрын
I once got my corkscrew taken away at the airport checkin when flying between Warsaw and Milano. Not sure if the corkscrew is allowed onboard then. Thanks for the vid and showing your customization.
@FittoSurvive Жыл бұрын
That's crazy! 😕 TSA can be quite excessive at times.
@konradxtofik Жыл бұрын
@@FittoSurvive it is madness. I’d never kill a fly and love carrying my Victorinox. 😭😭😭
@FittoSurvive Жыл бұрын
@@konradxtofik And really, what are you going to do with a corkscrew?? Hijack the plane? 😅
@konradxtofik Жыл бұрын
@@FittoSurvive duh 🤪😂😂
@zelja. Жыл бұрын
I had "the honor" to go through TSA checkpoint. I wouldn't even try (as non-american) to persuade those people that this modified SAK is TSA compliant. I just place my SAK in the checked luggage. I don't need it in the cabin, and if you have some tools (like screwdriver for your glasses or whatever), just bring cheap chinese multitool or something that you don't care about. Carrying *locking* knife in Europe is probably illegal in most countries, but SAK's are generally OK. You don't need it every hour, right? Just keep it in your pocket. Police needs a court order to search you (at least where I live). I carry an Explorer all the time and use it basically just to cut that shrink-wrap thingie off the soda bottles packages.
@FittoSurvive Жыл бұрын
Yeah, I know exactly what you mean. 😬
@neoaliphant 2 жыл бұрын
Video request for leatherman mods, not taking apart as such, but things to add on use with. Thanks
@FittoSurvive 2 жыл бұрын
I have been wanting to anodize the titanium scales of my Leatherman Charge Ti for a while now... I may do something with it. 🤔
@neoaliphant 2 жыл бұрын
@@FittoSurvive on my surge ive added a selection of bosche hacksaw blades to the pouch, ground down a cheap driver holder to fit in the thin leatherman bit driver, but always on teh lookout for more tricks
@FittoSurvive 2 жыл бұрын
@@neoaliphant Interesting mods! I haven't gotten into many of the Leatherman mods yet.
@CharlesHeller 2 жыл бұрын
@@FittoSurvive Do you know Max lvl edc?
@FittoSurvive 2 жыл бұрын
@@CharlesHeller Yes! I know Dominic. He's really talented!
@28tpi Жыл бұрын
I was able to carry on the plane. Just have to put it in your luggage and NOT your carry on. That goes for guns too as you won't be able to access it until after you get your baggage. Not 100% sure if that rule applies to international flights. Fine job! Thanks for sharing.
@FittoSurvive Жыл бұрын
Definitely is not a problem with check in luggage. Thanks. 👍🏻👍🏻
@grahamwest1079 Жыл бұрын
Like the scalpel blade mod
@FittoSurvive Жыл бұрын
Thanks. 👍🏻👍🏻
@julo7138 2 жыл бұрын
Great build! thanks for sharing :) What is your "setup" for the two grinding wheels?
@FittoSurvive 2 жыл бұрын
Thank you! I don't remember exactly, but seems like the "stone" wheel on the left is a 120 grit and the disk on the right is a diamond coated wheel for sharpening. Basically on the left is course, it goes through the metal quickly. Then once I get close to where I want to be, I use the one of the left for more precision.
@julo7138 2 жыл бұрын
@@FittoSurvive excellent! Thanks
@JaimesonLaLone 2 жыл бұрын
TSA regs are scissors less that 6 inches are OK. I have a SAK Jetsetter (58mm) and I am able to carry it onboard no problems
@FittoSurvive 2 жыл бұрын
OK, thanks. 👍🏻
@JaimesonLaLone 2 жыл бұрын
I should say the Jetsetter is my "don't feel naked" while flying when my EDC SAK Ranger is in my checked bag
@FittoSurvive 2 жыл бұрын
@@JaimesonLaLone I completely understand that. 😅
@geeeeeeeezzzzzzzzzz 2 жыл бұрын
That was great skill to watch but I can't help thinking just put it in the hold luggage or maybe there is some essential reason to carry it on a flight?
@FittoSurvive 2 жыл бұрын
Yeah, that would be the easy way to do it. 😂😝
@CharlesHeller 2 жыл бұрын
NEVER be without SOME tool on you, esp pliers. They never see my Swiss Tech "Swiss Key." Gives me a small knife for oranges and such. Put it on your key ring. Roll of quarters and a sock gets right on, too.
@Dan-qm7ho Жыл бұрын
where do you get the mini torq hex screws and a parts to rejoin the scales of the knife?
@FittoSurvive Жыл бұрын
Torx screws and pivot barrels can be found from DeCustomForge (you can find him on Instagram). The parts for reassembling this knife were all "harvested" from other SAKs.
@John-qm2ky 2 жыл бұрын
Great build. Not airline friendly for Aust. as you can’t carry on corkscrew or scissors but replace the corkscrew with a screwdriver and remove the scissors and there’d be no dramas.
@FittoSurvive 2 жыл бұрын
Thank you. The scissors make sense. It's odd that the corkscrew would cause trouble, but I don't doubt it. 😅
@thomasmanson1119 8 ай бұрын
I like the Evolution (e.g. Wenger) scissors and pliers because of their spring design. Are they interchangeable with the original Victorinox designs? Thanks, Tom KC3QAC
@FittoSurvive 2 ай бұрын
I've not tried placing the Wenger style pliers in a 91mm SAK. But I agree, their spring is much more dependable. I place the Wenger style scissors in the 84mm SAK though. Takes some modifying, but it works.
@TheDrivebynerf Жыл бұрын
I subbed. Great vid. Is this a victorinox ad? Lmfao. I have a 40 year old victorinox prestine, barely ever out of case, sadly has normal clock but now I'm thinking upgrade to led light
@FittoSurvive Жыл бұрын
Thanks for the sub! Definitely not a Victorinox ad... In fact, I've got a feeling that my picture is in the post office in Switzerland. "Wanted for defacing Swiss Army Knives". Or something like that. 🤣🤣🤣
@karinamcfall3383 2 жыл бұрын
🔥🔥🔥 nice.
@FittoSurvive 2 жыл бұрын
Thanks!
@thomasmanson1119 8 ай бұрын
Will the off-center hole in the brass spacer not affect the operation of either the new knife or the Havalon tool?
@FittoSurvive 2 ай бұрын
I've literally made hundreds of these modifications with the pivot bore like that. Haven't had any issues yet. *knocks on wood. 😋
@nikitakinsella2059 11 ай бұрын
Is it possible to put a traveller's red front with the screen and backside on a cybertool lite?
@FittoSurvive 11 ай бұрын
Yes, it is compatible. But, the side with the screen will need a special liner behind it to make space for the sensors.
@joshuap6569 Жыл бұрын
Instead of modifying the backspring for the can/bottle openers could you just use the backspring from the original slot? the awl and corkscrew look the same on the attachment point then you could keep the keyring/lanyard.. I've never customized one but I'm going to real soon
@FittoSurvive Жыл бұрын
The can/bottle opener spring is 0.3 mm thinner than the original blade spring and corkscrew. So, if you were to use the openers back spring, then the corkscrew will be too thick.
@stuartmiller8053 2 жыл бұрын
Cool modification and build. Do you have any ideas of what you could swap out the parcel hook for? Cheers Stu
@FittoSurvive 2 жыл бұрын
Thank you! The parcel hook has a unique shape, so unfortunately I have not found a replacement for it.
@CharlesHeller 2 жыл бұрын
You are going to give moral offense to the Clan of The Parcel Hook.
@FittoSurvive Жыл бұрын
@@CharlesHeller 🤣🤣🤣 For sure.
@aarde7036 Жыл бұрын
@@CharlesHeller Hahahaha, yes! I love the hook!
@frankysour Жыл бұрын
Great video and great job as usual! Question: The scalpel seemed to have the stud protruding on both sides at the beginning... Wasn't it possible to have it mounted flipped around? Would have been one hand opening (with right hand :) ) in that case.
@FittoSurvive Жыл бұрын
Thank you! The scalpel holder could be placed on the other side of the knife, I'd have to use a different set of scales without the corkscrew cutout though.
@frankysour Жыл бұрын
@@FittoSurvive yeah, that I understand, but I meant flipping it (together with it's springs, of course) in that same layer where you put it (unsure if there is enough space on the top side, though.... I thing the lower part of the SAKS is a couple mm wider than the top) As you may imagine, I am trying to understand how your magic is worked out, very fascinated by your work...
@FittoSurvive Жыл бұрын
@@frankysour OK, I see what you mean. The spring can not be flipped unfortunately.
@frankysour Жыл бұрын
@@FittoSurvive ......that makes a lot of sense, I need to study a little bit more 😁😁 but... Fantastic that you answer me, honored!! Very kind and available, in addition to being a sak Jedi Master...
@FittoSurvive Жыл бұрын
@@frankysour Welcome you are, young padawan. 😅👍🏻😁
@lucasbraun9783 2 жыл бұрын
Do you think it would be possible to fit the scalpel Blade and the combotool from the compact together in one layer? Or is it even possible to use the knife spring with the scalpel?
@FittoSurvive 2 жыл бұрын
It would not be possible to place the scalpel and combination tool on one layer.
@lucasbraun9783 Жыл бұрын
or is it possible to buy just the spring separate?
@FittoSurvive Жыл бұрын
@@lucasbraun9783 Sometimes you can find people selling SAK parts on Ebay, but not all of the time. It's easiest to find a donor knife and take parts from it.
@chrismacdonald8846 2 жыл бұрын
Can you do this with The mini champ and put stay glow skills
@FittoSurvive 2 жыл бұрын
I can. But I would have to use a different (smaller) scalpel holder.
@francobuzzetti9424 Жыл бұрын
I've been watching lots of your videos on these mods , is it possible to include any kind of lock for the blade?
@FittoSurvive Жыл бұрын
I am still working on that. There are a couple of options, but haven't found any solutions yet. I will post the project to KZfaq when I get it all figured out.
@lucasbraun9783 Жыл бұрын
Do you have any alternative for using 2 saw spring. Because I don't have any 91mm Victorinox lying around but I want to try this mod.
@FittoSurvive Жыл бұрын
The only alternative I know of is 3 fish descaler springs.
@AMERICANPRIDE1100 Жыл бұрын
It’s cool to watch you work but a little scary with the scalper attached
@FittoSurvive Жыл бұрын
😅 Yes, I have had several people comment on that. 🫣
@huey_UK 9 ай бұрын
What were the three (actually two) springs you used for the Havalon layer, they look like they came from the fish scale remover layer?
@FittoSurvive 9 ай бұрын
The 3 springs are from the descaler. I substituted them for 2 saw springs.
@huey_UK 9 ай бұрын
@@FittoSurvive now Heinnie in the UK stock Havalon I'm sorely tempted to try your mod 😀
@FittoSurvive 9 ай бұрын
@@huey_UK It's a great mod! Takes a lot of grinding on the scalpel holder, but definitely fun to do.
@lucasbraun9783 2 жыл бұрын
Form which Tool Are the springs you used for the scalpel? Are they from the saw which you used as a template?
@FittoSurvive 2 жыл бұрын
Yes, they are from the saw.
@thomasmanson1119 8 ай бұрын
Interesting that you seem to be wearing a Leatherman bracelet! Tom KC3QAC
@FittoSurvive 2 ай бұрын
Yep, it's a great multitool
@mckennamike1 2 жыл бұрын
Can you add a link to the gel pad you used to remove the scalpel blade?
@FittoSurvive 2 жыл бұрын
It is actually a plastic blade remover. Here is a link. amzn.to/3BTEmVF
@5093329225 Жыл бұрын
noticed there was no lube used. does the action feel the same even after u cleaned all the lube ?
@FittoSurvive Жыл бұрын
I lube the knife after I finish assembly. I noticed that if I use lube during assembly it usually gets brass filings in it and I have to clean it out and replace the lube.
@tikkidaddy Жыл бұрын
Oh this is exactly the question I was going to ask. I love the Havalon knives but the handles are a bit weak...its a skinning knife, not a prybar...I get it, but still a Vic is way more solid...so a Vic Ranger model for a larger Havalon blade maybe?
@FittoSurvive Жыл бұрын
Absolutely, it will work with any 91mm SAK.
@tikkidaddy Жыл бұрын
When I got my Havalon I was planning on boar hunting with my son in SC and wild boar hide is thick and hair abounds so I got the biggest one they made at the time. You can of course hone them and strop in a have to case as well
@FittoSurvive Жыл бұрын
@@tikkidaddy I like that they have an optional saw and gut hook that can be placed on the Piranta size.
@tikkidaddy Жыл бұрын
Bone saw??! WOW!....That's exactly why Havalon is so appealing to many hunters. If you're in the field ya got choices. Carry lightweight diamond and ceramic honing tools, carry more than one knife, carry something with more than one blade. Those Scalpels weigh next to Zilch compared to an outdoor edge set or a Buck 110 etc
@FittoSurvive Жыл бұрын
@@tikkidaddy Yes, it really is a nice option. 👍🏻👍🏻
@StarsoftheStreets Жыл бұрын
@fittosurvive Could you please tell me what is the thickness of the brass pins on the Victorinox knives? Thank you.
@FittoSurvive Жыл бұрын
Hey, the brass pins are 2.5mm and 2.2mm.
@StarsoftheStreets Жыл бұрын
@@FittoSurvive That's great, thanks a lot for your reply. That's much appreciated!
@FittoSurvive Жыл бұрын
@@StarsoftheStreets You are welcome.
@cecilm3720 2 жыл бұрын
SAK-mod idea: A metal insert - into the blade-slot - to prevent the blade from closing when open. [Info below.] May I suggest this as a product for you to offer? I would definitely purchase one for each of my SAKs. Here is the info: Channel name: STORN Video title: Victorinox DIY LOCK for 90mm
@FittoSurvive 2 жыл бұрын
Very interesting. Looks fairly simple to make too. Thanks for sharing
@cecilm3720 2 жыл бұрын
@@FittoSurvive Great. :) I thought this might be a neat feature.
@FittoSurvive 2 жыл бұрын
@@cecilm3720 👍🏻👍🏻👍🏻
@erebostd Жыл бұрын
Or you just buy a wenger SAK (they are now part of victorinox), they come with locking blades 😉👍
@cecilm3720 Жыл бұрын
@@erebostd Locking blades are a no-no in many places.
@bgraingerjr Жыл бұрын
Does anyone know what the springs are from that we're used to support scalpel??? I am going to try to build my own "travel-friendly" SAK.
@FittoSurvive Жыл бұрын
I used the saw springs.
@andrewfett142 Жыл бұрын
👍🏼 I like it. I’ve heard they will take any tool. Blade or not. Beware!!!
@FittoSurvive Жыл бұрын
Thanks. Yeah, I am sure that they can. 😕
@Go-zi1py 4 ай бұрын
Could you have added a magnifying glass in the empty space?
@FittoSurvive 2 ай бұрын
Unfortunately, no.
@dsheckx 2 жыл бұрын
I have traveled with full size scissors in my bag. They had to ask the ranking officer but they let me go so I don't think you would have an issue. I was wondering if the new blade contacts a liner or spring when closed. It looks like it does. That would likely dull that part of the blade very quickly but may be resolved with a bit of grinding. Just curious.
@FittoSurvive 2 жыл бұрын
Cool, a couple of people said that they were able to fly with scissors too. Should be easy to fly with this setup then. I adjusted the scalpel so that the blade does not tap the spring.
@bernardchoi 2 жыл бұрын
i checked in nose hair scissors that were blunted at the tip. my be round off the tip a bit for added confidence.
@FittoSurvive 2 жыл бұрын
@@bernardchoi Interesting. That may help.
@cecilm3720 2 жыл бұрын
Just look at the display trashcan of confiscated items at the airport security check… tons of scissors in there (even tiny nail cuticle scissors). Great build BTW.
@FittoSurvive 2 жыл бұрын
That is true. They really do go overboard, but again, that is their decision to make apparently.. 😒
@cecilm3720 2 жыл бұрын
@@FittoSurvive Better to err on the safe side, IMHO. One can’t argue with officials: I had to dispose of an empty cigarette lighter (even though I checked online and it said that empty lighters are permitted). Would be a shame to have such a gorgeous modded SAK confiscated.
@FittoSurvive 2 жыл бұрын
@@cecilm3720 I completely agree. Especially with the scissors. But, the guy who ordered it said that he will let me know after he flies with it. Then I'll pin a comment here of the results. 🤞🏻👍🏻
@video-oq1hj 2 жыл бұрын
Hi 🤗 Thankyou so much for this video. I have a standard swiss champ and a swiss voyager that basically has the same digital watch scale and pen/pick ect scale shape. I'm.looking to fit the pair of scales to the champ body. The scary part is removing the scales without cracking them as they are dicontinued and very rare. The other challange making holes on the layer for the scale to seat true. I'm going to do this without removing the rivets, so its going to be long tricky work with the dremel. I also noticed you was able to snap back on the scales with very little damage to the rivet holes ! Very nice work. Any tips for me 🤔
@FittoSurvive 2 жыл бұрын
Hey! Glad. That you enjoyed the video. Removing the scales has to be done slowly and carefully. You don't want to damage the scales, but also there are electronics that protrude on the back of the scale that you dony want to damage either. Making holes on the Swisschamp liner REALLY is going to be quite the challenge. You might want to measure them up before you start, because if u remember correctly the liner that goes next to the on board computer is a bit thicker, don't know if that will cause you any trouble or not... My advice, take it slow, work your way around the rivets. Don't just force from one side. I can't really give any advice about making holes in the liner...
@video-oq1hj 2 жыл бұрын
@@FittoSurvive Thankyou. I'm going to make a template of the liner and apply that directly to the champ liner. Yes I've noticed the voyager liner is thicker ! I'm guessing the button will stick out a tenth of a mill more ... I hope so 🤔 I'll take plenty of photos.
@video-oq1hj 2 жыл бұрын
Also, your the only video.I can find of digital scale transplanting to another unit. I would think it would be more a more popular mod. Those digital clock units are worth a lot of money these days to collectors.
@FittoSurvive 2 жыл бұрын
@@video-oq1hj Yeah, they really have become expensive and difficult to find.
@FittoSurvive 2 жыл бұрын
@@video-oq1hj Let me know how it goes for you!
@JokerInk-CustomBuilds Жыл бұрын
round off the tip of the scissors so they are more dolphin nosed and I think they will be fine with tsa...
@FittoSurvive Жыл бұрын
True. That probably would help.
@JokerInk-CustomBuilds Жыл бұрын
@@FittoSurvive Humble tip for keychain carry on custom builds with no keyring loop; Just hook the small ring to the hook-tool and close it. It allmost closes and is in my opinion more than secure enough to hang from.... So if you attach the small keyring to your bigger keyset, you can unhook and hook the knife easily by just pullin in the right direction... It is atleast a makeshift solution if needed on the go that is worth a mental note....☺️
@sethknotts988 9 ай бұрын
Where do I get the springs and scales to run a Havalon
@FittoSurvive 8 ай бұрын
You can use the saw springs.
@dennisdozaii1984 2 жыл бұрын
What backsprings did you use for the scalpel?
@FittoSurvive 2 жыл бұрын
I used 2 saw springs.
@UCkI6pPBQ1IaNlicrwsnR5_w Жыл бұрын
Why did you modify the knife spring to fit the openers, instead of just using the original openers spring (thereby keeping the keyring)? Love your work, but it seems like you rushed through a few of your decisions without explaining them.
@FittoSurvive Жыл бұрын
I had to keep the knife spring because it is the only one that can accommodate the corkscrew. The openers spring is 0.3 mm thinner than the blade spring. This is why I had to use some washers next to the can and bottle openers.
@CharlesHeller 2 жыл бұрын
Where can I buy that electronic scale gadget to go on my 91mm Ranger??? Ooooh...
@FittoSurvive 2 жыл бұрын
The electronic scale is original from Victorinox. It can be found on the Victorinox XAVT or the Victorinox Traveller. But, it is not easily swapped. The first liner has to have cutouts to match the electronics.
@augustinboyd9626 Жыл бұрын
P.S with all of the batteries included please...
@timsimco9471 2 жыл бұрын
The scissors are small enough to pass tsa check. I think the limit is 3 inches so even the leatherman raptor is travel friendly. My travel Vic is scissors and openers with a Phillips and fine screwdriver on the underside.
@edwardfletcher7790 2 жыл бұрын
WRONG ! The blade limit to street carry in many countries is 3 inches. That doesn't mean you can carry smaller than 3 inch blade on a plane ! LMAO
@FittoSurvive 2 жыл бұрын
Interesting. So, you've flown with that and not had any trouble?
@FittoSurvive 2 жыл бұрын
@@timsimco9471 You mean the full length of the scissors, right? Or the cutting edges can be to 3 inches?
@timsimco9471 2 жыл бұрын
@@FittoSurvive I haven’t had any trouble, however, I have always had to explain it to the tsa agents and allow them to examine it to make sure it meets their criteria for safe travel. Red sak scales tend to be a red flag, so I have to allow them to do their job and not rush them so you have to plan accordingly time wise and not be a jerk going through security.
@FittoSurvive 2 жыл бұрын
@@timsimco9471 I'm sure being cooperative and polite helps the process a lot.
@dalecarr5445 2 жыл бұрын
This meets TSA published requirements. I don’t think it would be an issue but you always have to hope an agent isn’t having a bad day.
@FittoSurvive 2 жыл бұрын
It's unfortunate that it comes down to the mood of the agent on that particular day. 😣
@konradabel2353 2 жыл бұрын
Forgetting for a moment the things that you'd take off to make it TSA approved, is there anything from other SAK's that you'd replace all of the sharp bits with to really be TSA 'approved' (well at least less of a problem) and still be quite compact? That would be a video I'd like to see.
@FittoSurvive 2 жыл бұрын
Certain tools can be easily substituted. Others not so much. Like, if I was making this knife for me, I'd definitely remove the scissors and there's nothing to substitute it with. I could replace the scissors with pliers for example though.
@CharlesHeller 2 жыл бұрын
@@FittoSurvive How about modding the scissors to be detachable with a scalpel blade base?
@FittoSurvive 2 жыл бұрын
@@CharlesHeller That's a cool, wild idea. Not sure at the moment how I would do that though. 👍🏻👍🏻👍🏻
@rambazamba9575 Ай бұрын
With no lock, this knife better not collapses on your finger. Chances are your finger is gone.
@FittoSurvive Ай бұрын
I did upgrade the mod. Now I can install the scalpel with the lock. kzfaq.info/get/bejne/r7-peNiU07aoZKc.html
@tudormarcu2006 Жыл бұрын
Nice build! However I think it's still illegal for air travel - at least in Europe, as it contains a screwdriver.
@FittoSurvive Жыл бұрын
Thanks! Wow, you think the screwdriver would cause trouble on the plane too? Didn't think that it would, but who knows... Could be.
@Andrei-vr4pj 2 жыл бұрын
Or you can simply remove the knife layer without any modifications, right?
@FittoSurvive 2 жыл бұрын
I can remove the blades and replace them with the can and bottle opener. It still requires modifications, but not as difficult.
@timsimco9471 2 жыл бұрын
For removing these scales I warm them up under my arm pit for a while. It really sucks carrying around an Xavt that way.
@FittoSurvive 2 жыл бұрын
🤣🤣🤣 Thanks! Loved that!
@alexriddles492 2 жыл бұрын
I have not tried this but I think a blowdrier might be a good way to heat the scales.
@FittoSurvive 2 жыл бұрын
@@alexriddles492 That's a great idea actually. 👍🏻 Thanks.
@s.h.v.c2865 2 жыл бұрын
@@FittoSurvive A heatbag (the type filled with wheat that you microwave) would also work, that's what's suggested to help soften the glue for replacing phone batteries
@FittoSurvive 2 жыл бұрын
@@s.h.v.c2865 That's a really good idea too. Would the heat not be moist?
@arnolhernandez6897 2 жыл бұрын
Cuál será el costo o el precio de esa navaja
@FittoSurvive 2 жыл бұрын
A build like this costs around $400.
@ignaciomartin1238 2 жыл бұрын
Great mod! Looks great and perfectly finished. Corkscrews are prohibited on airplanes as far as I know and that size scissors same. But incredible nevertheless.
@FittoSurvive 2 жыл бұрын
Thank you! It's rough to say, seems like there are so many different answers out there. It'd be awesome if you could mail the tool in to be "certified" TSA approved.
@matthewstrunk605 2 жыл бұрын
The Transportation Security Administration currently states that corkscrews without blades are acceptable in carry-on bags, while those with small blades must be placed in a checked bag (as with any sharp object, they prefer it be sheathed or wrapped to prevent baggage handlers and inspectors from being injured). Scissors, If packed in carry-on, they must be less than 4 inches from the pivot point. Any sharp objects in checked bags should be sheathed or securely wrapped to prevent injury to baggage handlers and inspectors.
@FittoSurvive 2 жыл бұрын
@@matthewstrunk605 Well informed answer. Sounds like it was taken straight out of the textbook. Thanks. 👍🏻
@dawnmoriarty9347 2 жыл бұрын
From personal experience in Europe no scissors or even nail clippers are permitted
@FittoSurvive 2 жыл бұрын
@@dawnmoriarty9347 Yeah, some times the TSA can be super intense.
@erikgonzalez1762 2 жыл бұрын
Is it better for you to provide you with a swiss army knife for a custom build???
@FittoSurvive 2 жыл бұрын
It really depends on what you are wanting. In this case, with the LED screen and all, it was best for me that the tool was provided.
@oscasterr Жыл бұрын
I love your work, where are you based? I wonder to ask you for a knife but I'm worry about Spanish customs, thank you
@FittoSurvive Жыл бұрын
Thank you! I am from the States, but my job has currently taken me overseas to central Asia. I ship worldwide though.
@user-hs4px5fd3h 2 жыл бұрын
how to wash up this knife, it's water resisted?
@FittoSurvive 2 жыл бұрын
I am not certain. But I do not think that the electronics in the scale are waterproof. So, I would definitely not submerge it in water. Washing the tools individually and washing between the tools with a moist tooth brush would be the best option.
@user-hs4px5fd3h 2 жыл бұрын
@@FittoSurvive thanks
@user-nj7ny7xs4o 2 жыл бұрын
Excuse me, can you tell me where i can find the springs for this scalpel?
@FittoSurvive 2 жыл бұрын
I used 3 fish scaler springs.
@user-nj7ny7xs4o 2 жыл бұрын
@@FittoSurvive and where can i buy that?
@FittoSurvive 2 жыл бұрын
@@user-nj7ny7xs4o It can be found on the Victorinox Swisschamp or Victorinox Fisherman. But, you will need 3 of them.
@user-nj7ny7xs4o 2 жыл бұрын
@@FittoSurvive Oh, ok, thank you. So, can i ask how much is adding the scalpel to a sak?
@FittoSurvive 2 жыл бұрын
@@user-nj7ny7xs4o I charge $100 just for the mod. That doesn't include shipping.
@felixcat9318 2 жыл бұрын
If you could put the scalpel blade into your checked luggage, why would you not just put the complete, unmodified Victorinox knife in there instead?
@FittoSurvive 2 жыл бұрын
The scalpel blade is removable. That's what makes it "travel friendly". So, before you fly, you toss scalpel blade leaving just the scalpel holder. After arriving, you attach a new scalpel blade. 👍🏻
@1967AJB 2 жыл бұрын
You said that you were adapting this knife for someone, is this a service you offer?
@FittoSurvive 2 жыл бұрын
Yes, I make these to custom order. Check out my website for information on how to order one. www.f2scustoms.com
@1967AJB 2 жыл бұрын
@@FittoSurvive On my way!
Jony Fire
Рет қаралды 2,4 МЛН
Felix Immler
Рет қаралды 269 М.
Zac In The Wild
Рет қаралды 161 М.
Cool Smart Gadget
Рет қаралды 34 МЛН