How I Remove Heavy Rust from Metal Truck Frame SandBlasting

Рет қаралды 21,478

9 ай бұрын

Grit blasting a Truck bed if you enjoyed the video press the like and drop a comment would be nice to hear from you :)
orange truck Sandblasting video :
• Grit Blasting paint & ...
Concrete truck Sandblasting part 1 :
• Concrete MiXeR Truck S...
Part 2 :
• Concrete MiXeR Truck S...
Please be kind and respect the fact these videos are a hobby for me if you want to see more content press the subscribe and ding the bell then you will be notified of my next uploads see what els I blast.
As always thanks for watching much appreciated!
Hard doing for easy viewing :)
If you are a blaster and require help please drop me a message on here. Please don't email or call asking for advice on how to set up or operate your Rig. I need to prioritise my free time doing work calls, emails and quote enquiries. I will always try to respond to comments on my videos :)
kind Regards
Mick Blackley Sandblaster
MobileBlasting.co.uk
M.Blackleys.MobileShotBlasting

Пікірлер: 74

@scottkenzig5144 9 ай бұрын

You do well Mick blasting around all the wires and stuff 👍alot of obstacles. Got me ready to start my day's blasting 👌👍🇭🇲🏴󠁧󠁢󠁥󠁮󠁧󠁿

@Mobileblaster 9 ай бұрын

Thanks mate what you blasting today?

@scottkenzig5144 9 ай бұрын

@Mobileblaster G'day Mick. Starting with a 785 dump truck cab and just the usual CAT parts 😆👍

@philglover2973 9 ай бұрын

Awsome job mick thanks🚚🚚🚚🚚🚛⛟⛟⛟

@Mobileblaster 9 ай бұрын

😊👌👍 as always appreciate your imput 😎

@deanoloughlin6129 9 ай бұрын

That's amazing work 👏

@Mobileblaster 9 ай бұрын

Thank you 😊

@paulf2529 9 ай бұрын

You would be a joy to follow on from for the painting, the new blaster seems quite a bit quicker.

@Mobileblaster 9 ай бұрын

:) thank you I try to do as much as possible with as little damage as I can the bits I leave are because I know I would do more harm than good :) and yeah it wants to be its 2x the power of the last 1 :)

@phillipherbst6357 9 ай бұрын

I am a relatively new viewer of your channel. I find it satisfying and relaxing to watch. I watched from the first video that you posted and I am now up to date. I do however have a question as I do not know any better. Of all of the boats that you have cleaned, I have never seen you clean the propellers. I also appreciate that you have explained about the forge scale. Thank you.

@Mobileblaster 9 ай бұрын

Welcome to the channel 😊 Yeah normally the propellers are made of brass and don't get painted so no need to prepare the serface 👍 if your still hungry for more videos click my name or the profile picture then navigate to playlist and in their is extra content 😉 😊

@rlewis1946 9 ай бұрын

Hello from Buffalo, NY on a warm 84°F, Labor Day Holiday. First rate job, Mick! When I started watching, and you pointed out the complexity of the surfaces to be cleaned, I was a worried; but not to worry, you did a first rate job - as usual. Hope all is going well for you and your family. Best wishes and good health, Roy

@Mobileblaster 9 ай бұрын

Thanks Roy appreciate that 😊

@user-hj6ve7de2g 9 ай бұрын

Сложный объект. Много работы. Ты справился. Браво!

@Mobileblaster 9 ай бұрын

Thank you 😊

@catalinszoke3112 9 ай бұрын

Hello Mick! You make a great job with your new compressor! The new setup look more practical! You are the vision for future in my business. You inspirate me to make this job in my country, and now work good all the thinghs. One question, what media you use at this job? 🤝

@Mobileblaster 9 ай бұрын

Thank you 😊 this job was iron silicate 👍

@gerryduffy6700 9 ай бұрын

Hey Mick, great vlog as always. It would be good to see the process and/or the end result (painted) of a barge or truck, showing what your efforts have led to?👍🇬🇧

@Mobileblaster 9 ай бұрын

Thanks 😊 yeah I get that but it means having time off work to film as that's not my job if my hobby makes enough money I would eventually take that time to film but until then I hope you understand

@gerryduffy6700 9 ай бұрын

@@Mobileblaster absolutely Mick, it was only a suggestion for the future I guess. As said, I love the vlogs and I always look forward to watching them when you upload.

@Mobileblaster 9 ай бұрын

@gerryduffy6700 thanks 😊 yeah it would be nice to film it getting painted but that could be a week or 2 worth of work away I couldn't have that amount of time off just to film 😬

@Barnsley_brev 9 ай бұрын

Great job mick old koker.would like to see a visit once it's painted like 👍

@Mobileblaster 9 ай бұрын

Thanks 👌 😊 yeah would be nice but it means having time off work to film 😕 I enjoy my hobby but not that much haha

@Barnsley_brev 9 ай бұрын

@Mobileblaster ey up koker hope you had a good day on tools. As I work for myself ,I realise you can't go back and film every job. But ask painter to throw you some stills an throw them in a later vid. Really would like to see what your hard work turns out like. Cheers for showing your work fella

@Mobileblaster 9 ай бұрын

@@Barnsley_brev ive tried before folk simply forget :(

@user-vt7tw2ic8y 9 ай бұрын

Здоровья тебе,друг!

@Mobileblaster 9 ай бұрын

Thank you 😊 same to you my friend

@james1c763 9 ай бұрын

great video pal how you getting on with your new truck

@Mobileblaster 9 ай бұрын

Thanks 👌 😊 it's Bob on saves loads of time loading etc as my yard I had to reverse and shunt about with the old van to get to the side loading door with the trailer on then shunt about to park it up to keep the drive clear so we can get the car on with this I can park it and forget about it and just load it when I need to through the back doors 👌 that was 1 of the main reasons for getting it👍

@GatorsNest 9 ай бұрын

Would be nice to see the truck after its been painted.... nice!😊

@Mobileblaster 9 ай бұрын

I will try 😬 depends if I'm back their when it's painted but not handed over 😊

@jameswitkowski6736 9 ай бұрын

Pressure doesn't lie , blow through rust , no problem !!!

@Mobileblaster 9 ай бұрын

😬😎👌👍

@larryperdue508 9 ай бұрын

You need one of those inflatable inclosers, so you don't have to worry about whether⛺️⛺️😊

@Mobileblaster 9 ай бұрын

Would be a nice asset 😎

@johnhelms6393 7 ай бұрын

In terms of feedback, I have watched quite a number of your videos, you have skillzzz in video as well. Your sandblasting technique is artful. Without going KZfaq overboard on explanatory details, some basic job related specs would add educational component, media, nozzle, pressure, not clear on any of this, even CFM compressor size though I did catch video when you upgraded to 350 or at least bought a new 350. Based on speed I would guesstimate that you are working consistently with a 350.

@Mobileblaster 7 ай бұрын

Yeah I understand adding more info would add more to the video quality but I don't add this info as I want to stay away from the how too side of things as alot can go wrong very fast and I don't want to be responsible for anyone hurting themselves trying to follow my style of working I'm not saying I'm doing things the right way or wrong way I just prefer to stay away from educational video type 👌👍 I used a 140 cfm for many years then a 180cfm for alot longer I think I started doing youtube after I had my 260cfm for a good amount of years I believe I've had that 5 or 6 year now I couldn't find a good replacement so I'm currently running 425cfm all 125psi I've also had alot of hours on a shop compressor 2500cfm 175psi and I know for sure that is too much for me haha

@cliffordmarshall3592 8 ай бұрын

Do you blast the underside too and have you blasted the underside of a truck with a skirted side body above the chassis like a recovery vehicle? have you anywhere to work or just mobile? and do you primer after blasting?

@Mobileblaster 8 ай бұрын

I will have blasted one before I've done all kinds of trucks and plant. I'm just mobile and try not to get involved with the finishing side of things. I can blast whatever the customer is willing to pay for 👌

@davidschank956 9 ай бұрын

Mick tell that guy that owns the shop That he needs to put up a tent so if it Dos rain at least you and the truck are Protected from the rain.! He can always take the tent down.! Or one of throus outdoor tents you have seen them around there white half round at The top with cement blocks on either side.!! It would help you out alot and him just to protect his investment on Time and labor from you if it is raining And you can keep working the job gets Done faster.! Just a thought.!

@Mobileblaster 9 ай бұрын

We have brain stormed this before but it would ultimately end up been used as a storage tent or parking. I'm not doing enough blasting at this shop to make it feasible or if he invested money the would want some return like 5 days aweek blasting and to be fair yeah they take bigger jobs on but it's a body shop that dose cab painting etc

@johnhelms6393 7 ай бұрын

What media are using around engine/front leaf springs etc?

@Mobileblaster 7 ай бұрын

28:40 jblast (iron silicate)

@darkfactory8082 9 ай бұрын

This is a hack of a job, since there are so many obstructions... I wonder how they paint it then and do a good job.. 🤔

@Mobileblaster 9 ай бұрын

They will take this into the paint booth jack it up in the air take the wheels off and sand the areas I cannot get then they strip whats needed to paint it. They make a real nice job just wish I could afford the time off work to stop and film it getting done 😬 if I'm back before it gets handed over to the customer I will definitely get some after shots but it's highly unlikely 😕 and asking them for photos They always forget 🫣

@870wingmstr 8 ай бұрын

@@Mobileblaster😂

@andrews2023 9 ай бұрын

Hey can I ask a few questions? What air pressure are you using, what nozzle size and what grit? I sandblast also but have much more dust than that

@Mobileblaster 9 ай бұрын

125psi @ 425cfm 850xl nosel and iron silicate try turning the grit off and only add just enough so it's removing the finish required 👍

@jdaspects 9 ай бұрын

Crushed glass and slag all day long #5 nozzles 185cfm psi varies

@Gerrit-Max 9 ай бұрын

I think the best thing to do with alloy rims is to wet blast them with glass beads, the finer the better. I'd say try it out first on an old crappy rim to see how it goes.

@Mobileblaster 9 ай бұрын

It was only the hubs that needed blasting not the wheels I knew the splash would result in damage so I tried to keep away but still help out by taking some work load off the shop 👍

@jdaspects 9 ай бұрын

@@Mobileblaster trick is cut some orange safety cones and use as covers then blast inside

@Mobileblaster 9 ай бұрын

@jdaspects best way would be remove the wheels 👍 I'm not a fitter and blast what I get told to blast I can only advise what's likely to happen 👍

@sonicbluecoupe 9 ай бұрын

Great job mate! You need some little legs on your metal plate for the exhaust. That way there is some air space between the plate and grass, so it doesn’t get to hot and kill the grass

@Mobileblaster 9 ай бұрын

Yeah ideally I need a 45° angle on the end to pump it away from the van but I will eventually iron all these issues out 😊

@jdaspects 9 ай бұрын

I kill grass all day long 😆 it grows back

@Mobileblaster 9 ай бұрын

@@jdaspects 😂

@grahamhale8844 9 ай бұрын

what have you changed mate seem,s to be blasting alot quicker ,and dont mean were you have speeded film up

@Mobileblaster 9 ай бұрын

Compressor it's 2x the size of the last en 😎 2x the operating costs too infact the I bet its near 3x the operating costs with the service costs last Compressor was 450£ this was £1200 to service and that's every 500 hours 🫣 but I do have plans for this 👍

@grahamhale8844 9 ай бұрын

right new there was some think, seems to leave a better finish aswell keep at it mate i know its a tw+t of a job

@leniczek1992 9 ай бұрын

@Mobileblaster what size compressor are you using now?

@Mobileblaster 9 ай бұрын

@@leniczek1992 425cfm @ 125psi

@leniczek1992 9 ай бұрын

That frame didnt look too rusty, some of the truck frames ive blasted i wonder why they even bother

@Mobileblaster 9 ай бұрын

It was mainly just prep for a repaint. I would live with abit of serface rust but some wagon owners like to stay ontop and keep them looking fresh for as long as possible 👌👍