HOW I SAND/PREP FOR LOW BUDGET PAINT JOBS (MY METHOD)

Рет қаралды 24,642

4 ай бұрын

In this video i show how i like to sand and prep for spray can & Bed liner paint jobs. If you like this Please subscribe, like & share the videos around for more awesome content to continue to flow!. GOD BLESS, Stay safe, Stay Awesome!
FREE Holy Bible download
tinyurl.com/erzjuatw
vILJn3X3pbZmbdlWoyO9y0z0PrQ7y6mWFPYaAn2kEALw_wcB
Link to Upol Body Filler
www.oreillyauto.com/detail/c/...
Link to rubber eraser wheel
amzn.to/3VM8xdo
Link to Sand paper i use (80 grit pack WORKS AMAZING LONG LASTING)
amzn.to/3U0VBPD
Link to Multi Pack of sand paper i used 220/120/80/60/40 Grit
amzn.to/3U04oRY
Link to PLaylist on spray can paint jobs
• Cheap Rust-Oleum Legit...
Truly Royalty Free music
/ @trulyroyaltyfree
Link to Noskweek (spray lube)
www.brahmanlube.com/products/...
Discount code MOORE15
to save 15% on entire purchase!
email me at moore_motor_sports@yahoo.com
mooremotorsportsgarage
texashondachannel
Link to BrahmanLube
AKA THE REAL BESTLINE
(what im using in my oil)
Discount code- MOORE15 for 15% off!
www.brahmanlube.com/?ref=zRJu...
Merch is currently unavailable because storefrontier shut down
I will get more merch from a different vendor soon sorry for the inconvenience
CLICK THIS LINK TO SUBSCRIBE TO MY OTHER CHANNEL
/ texashondachannel
If you want to help support the builds
i am always accepting donations
My cashapp- $Jamesdguy or
Paypal donations accepted
paypal.me/mooremotorsports

Пікірлер: 58

@JamesDguy 3 ай бұрын

Since recording this video I have fixed 5 more dents so it will be cleaner finished project. Just wanted to let everyone know who is following the build. I will mention and show some of that in upcoming videos so stay tuned and God bless you all!

@jawanpowell9053 3 ай бұрын

Appreciate the refresher. It's been a long time since I've done any body work. I'm hoping to paint my S10 this summer. I've always wanted to do a spray can pant job. You've inspired me to do that.

@eastcoastken 3 ай бұрын

As someone who does painting & collision repair for a living the only two suggestions I have are to use a wax & decreased between each grit of sandpaper to clean the surface and to tape off the lights & door handles if you're new to using a dander, it will prevent some unwanted damage. Looking forward to seeing you bedline the truck!

@JamesDguy 3 ай бұрын

Yes great advice thank you for the input! Definitely don’t wanna push the dirty stuff into the paint for sure. Thanks and appreciate the input. Did more body work tonight and got more dents taken care of too.

@dirtysouthlogging 3 ай бұрын

Lean not on your own understanding but trust in the lord with all your heart

@JamesDguy 3 ай бұрын

Amen! 100%

@brianrussell1565 3 ай бұрын

What's that got to do with anything

@deliveryguyrx 3 ай бұрын

HE has gotten me through more jobs than I can remember.

@hanknipper3921 3 ай бұрын

Thanks for showing how to prep James! God bless you and your family

@GlassWerx 3 ай бұрын

Trucks look. Good can't wait to see some color on it. Gotta start doing paint n body work here soon on the civic and s10

@aliciaANDanthonySandoval 3 ай бұрын

You did a better job of body work than I did on my 98 gmc sonoma. God bless, brother. Great video like always.

@JamesDguy 3 ай бұрын

Thanks im not that great at it but i do my best and thats all that matters to me. I appreciate your support! God bless you brother!

@byroncummings2952 3 ай бұрын

You do good work keep it up. I've owned that body style truck over 20 years. Best vehicle I've ever owned.

@JamesDguy 3 ай бұрын

Yeah without a doubt they are great!

@johnnymoody2740 3 ай бұрын

Really looking good. Can't wait til the paint video. You always try to put out content that all of us can learn from. God bless you and your family James 🙏

@jamesthef250guy6 2 ай бұрын

Thank you so much for all the videos you post. You really have given me some really good tips and tricks for spray painting a vehicle. And given me some confidence to spray paint my 97 F350 7.3. God bless man🙏🏻

@rog3rK 3 ай бұрын

Second video I see from the 500 but great video man. Thanks for all the help and God bless you sir. ❤ God even calls us threw KZfaq videos

@JamesDguy 3 ай бұрын

Amen! I am doing something real special with this truck and it’s ALL glory to God just wait and see :)

@russellrader8786 3 ай бұрын

Thanks for the detailed demonstration. 👍

@crona2144 3 ай бұрын

Thank you for this video I’ll be following this process in the summer whenever I can paint my obs 😎

@deansnider6553 3 ай бұрын

You da man James God Bless

@JamesDguy 3 ай бұрын

Nah yall are! 💪🏻

@terryrideout7457 3 ай бұрын

Thanks for great video.Loved it and Learned from you.God bless .keep up good Work.

@JamesDguy 3 ай бұрын

Thank you I will do my best and God bless you too!

@johnruble3454 3 ай бұрын

I needed this video im doing my quad cab dakota that has major clear coat peel and im using rustoluem turbo spray can

@2StallGarage 3 ай бұрын

Glad to see this video is doing well. Good stuff. 🏁

@JohnDoe-xl1ig 2 ай бұрын

I am odd man out, but I want fox mustang to basically look like your prep job, no paint, just primer, then wash, and clear coat. Then 347 stroker/custom block, full suspension, decent interior. Folks think oh look POS Ford that poor bastard, then light turns green. That said I have watched your video twice as body work is new to me but yeah, I learned quite a bit here, thanks. I subscribed for future lessons.

@Brysonandmason320 3 ай бұрын

Great job brother!

@bazilwreckerloughead 3 ай бұрын

Years ago my cousin bought a car that the previous owner freshly painted, but didn't prep it right so most of the new paint peeled off it. Preparation is SO important!

@JamesDguy 3 ай бұрын

Yup! I have seen spray gun jobs flake off worse than my spray can jobs because lack of prep. If you prep it right the paint sticks well, spray can or spray gun.

@V8dadmartin 3 ай бұрын

Wow Talk about timing, I’m almost done fixing my daily and the first thing on my check list was a spray can paint job. I saw your video on gray paint job you did 11 months ago and I came to check back to see if you made a prep video.

@JamesDguy 3 ай бұрын

Gods timing is always on time. He kept pressing on me to do get this video out so i did. I hope His message was well received too.

@lnt3ch 3 ай бұрын

I’ve been really inspired since I found your channel. I bought an ‘03 Acura RSX Type S and I’m not crazy about the color. It’s also fading in some spots. I’ve only seen a few of your videos so far , but would you recommend anyone try their hand at this? The RSX isn’t my daily so I was thinking I could really take my time prepping it for paint

@williamthibodeau1699 3 ай бұрын

I remember in one of your videos the dos and donts of rustoleum paint. Like how long between coats...if you wait too long it will cause wrinkling and peeling. Is there any way that you could do a comprehensive dos and donts...getting ready to try to paint my 74 olds cutlass and everytime i start i cant find the dont do this and that...amazing channel amazing work thank you for your time...GOD BLESS!

@simocov 3 ай бұрын

I've just come to your channel and I'm enjoying it so far, I'm a but disappointed you haven't repaired the dent on the front wing. I know it's a work truck but for a matter of a couple of hours it would look much better.

@JamesDguy 3 ай бұрын

Thanks and yeah I get that comment on a lot of things. Some of these dents on curved surfaces im not good at fixing because it’s on body lines. I am not a pro at body work I actually hate doing body work because by” fixing” it I sometimes make it look worse. I usually just replace the entire panel as I did with the driver door, front right fender, the entire truck bed and this one was in far better condition. I am probably going to fix the little damaged spots that are left like the fender and other areas but if I don’t get it perfectly straight it will be okay because it will probably get dented right back up. We will see what happens. Thanks and God bless

@abcsandoval 17 күн бұрын

Blessings brother!

@learningwithjuan 3 ай бұрын

Nice 👍

@ChadsGarage1 3 ай бұрын

Good stuff!!

@JamesDguy 3 ай бұрын

Thanks brother! Keep up the good work on your channel as well!

@patrickfagnan4033 3 ай бұрын

What do you use to wipe the vehicle with before spraying after sanding

@broncoramfan 3 ай бұрын

Thank you for the how to video. I've asked plenty of questions about sanding. How good does it feel working/ sanding in your garage without neighborhood karens all in your business

@JamesDguy 3 ай бұрын

It’s great! The garage isn’t very big though so have to do a lot of work outside until the shop is built. The weather has been a big issue for me right now but making it work!

@codymarsh8117 3 ай бұрын

Great video! Im almost done with sanding and priming my 94 c1500. Did you use the sander to remove the decals on the tailgate?

@JamesDguy 3 ай бұрын

Yes and no. I didn’t record the process but heat them up and use a razor blade. I kinda got carried away and didn’t record lol. I stopped the camera to re position it and didn’t hit record sorry for that.

@yisraelgomez4915 3 ай бұрын

Bendiciones desde México 🇲🇽

@hofferjh 3 ай бұрын

Looking good 🛻👍💫✨️💫💥❤️‍🔥💯😎

@lancebrantlinger-tommy3558 3 ай бұрын

I’m currently working on a 91 Firebird that has paint issues exactly like you have with that truck. I used 180 grit to sand it down and going to use I believe 320 after. So, you don’t use primer first before the spray paint?

@JamesDguy 3 ай бұрын

Depends the paint but rustoleum has great adhesion if using the advance formula or high performance enamel. I if the vehicle has multi colored panels I prefer priming the entire vehicle to be the same color before laying on my paint. This one is going to be primed the entire thing since it has multicolored panels and I want good adhesion. But no, I don’t always use primer and I don’t have issues when I don’t. It’s different from spray gun paint where a primer is necessary. I have had other brands like Krylon and duplicator flake off without a primer, but oleum doesn’t have that issue and I’m not quite sure why but it does save me money sometimes lol

@lancebrantlinger-tommy3558 3 ай бұрын

@@JamesDguy Thanks for the reply. This will be the second car I’m using Rust-Oleum on. First one was on a 84 Corvette. It’s flaking in parts and at times I get blisters. Not sure why. Anyways, I’m going to be using the rustoleum that has the 5 settings on it. So, you think since this is a one color car, I’d be fine just ditching the primer and just go with the paint?

@Jeff-mu8dq 3 ай бұрын

Painted my car with rustoleum thunder cloud grey 2 weeks ago. Plan on scuffing it down with 800 then clear over it with 2k. Will there be any reaction? I read that rustoleum takes a long time to cure and some got reaction to spraying over rustoleum after a couple of days.

@JamesDguy 3 ай бұрын

I like to wait a month for it to really gas off or whatever they call it. I have a video of my 2K clear going over my spray can ep3 paint job no reactions on mine. If it’s the 2X paint it might react and idk why the 2X rustoleum sometimes reacts but sometimes it won’t. The advance formula and the high performance enamel do great with a 1000 grit wet sand and clear

@stevengonyaw1617 3 ай бұрын

If you use hardener in the rustoleum, you will be ok ! If you didn't you should wait longer to clear coat

@TraumaChaplain 3 ай бұрын

Just a curious question if the truck bed liner paint makes any difference in the mileage per gallon?

@JamesDguy 3 ай бұрын

Good question but it hasn't affected it on any of my vehicles and i monitor that stuff close.

@TraumaChaplain 3 ай бұрын

@@JamesDguy I had guessed maybe it's like a golf ball with dimples, maybe it helps....

@SegaGenesis501 29 күн бұрын

I love your videos brother but to be saved we have to follow Acts 2:38. And Peter said to them, "Repent and be baptized every one of you in the name of Jesus Christ for the forgiveness of your sins, and you will receive the gift of the Holy Spirit.

@Artoconnell Ай бұрын

Just do it right, spray cans cost way more, are not suitable for that use. just do it right man. even the cheapest single stage will out perform that.