Thank you for watching and your feedback. Much appreciated.

Thanks for watching and sharing.

So I double checked.. it shouldn’t replacing everything Or losing your old songs . Just the checked playlists or crates should be carried over . I’m not 100 percent on your issue . Definitely get in the denon dj forums and someone might have some better thoughts/ feedback. I’m honestly not sure mine doesn’t do that .. sorry your having issues , let me know if you get it figured out . And if i see something I’ll get back to you too . Thanks.

Thank you for watching and your support.

Thanks for watching and your feedback. Much appreciated.

Thanks again for watching!

Thanks for watching and your feedback. Much appreciated.

Thank you for watching and your feedback.

Thanks for watching and your feedback.

Hello thanks for the watch & your question. Unfortunately in computer mode .. it’s working off your computer only . So no you will not be able to see your Sd or usb drive from the unit . To my knowledge. Thanks.

Thank you for watching and sharing. Yes , in engine dj it’s reading track data from a location in your hd but if you remove it or change its location in your hd it will be missing and error in engine dj too.

Thanks for watching and your feedback. Much appreciated.

Thank you for watching and your feedback. Much appreciated.

Thanks for watching and sharing. Are you able to check the cable inside the unit . Also checking the SSD drive connection. Lots of possibility. Let me know what you figure out . Thanks .

@DjMartiniMidwest someone mentioned that o need to format the drive on the PC before Installing it into the decks..

@@chasefrederick3834 yes , the drive needs to be formatted in exfat or fat32. Thanks .

Thanks for watching and question. Unfortunately I am not a Mac user so don’t want to give you any wrong information. So you might check the denon dj forums pages. I have found them help a few times. Thanks .

So let’s say I have a playlist in the software and on my usb. Now I want to add a couple song to that playlist that is already synced. If I use the sync manager for this task will it transfer all like 100 songs in my playlist which would take a while or just the few new ones. I’m basically asking if you’re only adding a couple songs to an existing playlist is it better to just drag them rather than use the sync manager?

@@Seriouspup the way I add songs no matter how many. Once the drives are connected then I launch engine dj software then I click on the drives devices panel. not the sync manager. Then I click on the drive I use with my prime go and then I click on the collection panel of that drive and simply drag the files in a playlist or create a new playlist and just drag and drop.

Hello , thanks for watching and your question. Have the files been sync / analyzed into engine Dj software? Possibly a file format issue .. Prime 4 hard drives / flash drives have to be in Fat32 format? Thanks .

@@DjMartiniMidwest Hi Martini, thx for the answer. I have 2 hard drives, one of 1 TB and one of 2 TB. Both are FAT32. I have installed Engine DJ to my computer. How can I get the files analised by Engine? Files were previously used with Traktor

Thanks for watching and your information/feedback. Your question thou I’m Not 💯? Especially on a Mac I’m a windows guy:) but when you sync new playlist on engine it should replace the old ones. Thanks .

Hello , thanks for watching and your question. Unfortunately to my knowledge in engine dj software files will be in the correct playlist but yes in the music files via your laptop it will be in alphabetical order. Although any changes should be made in engine dj software if that software was used .. if not it will cause errors to your music files. If a USB stick was made via your computer ( formatted as exfat or Fat32) and not made from the Engine dj software it should maintain the same files and playlists as your laptop. Thanks.

Thanks for watching and your feedback. Much appreciated.

Thanks for watching and your question. What controller do you have ?? and I’ll suggest SD , a flash drive , or micro Sd card with adapter.

@@DjMartiniMidwest Thanks man, I got the prime go, and it was a just standard fast speed SD card, I'm just getting the hang of it, but it's great

@@MrCheswickMusic I use a fast scan disk thumb drive. And also use micro SD card with adapter too…. Referenced below Amazon affiliate . Commissions earned . Reference links : SanDisk 512GB Ultra Fit USB 3.2 Gen 1 Flash Drive amzn.to/4cLFMTS Samsung EVO Micro Sd with adapter 512gb amzn.to/4bLrl0W Value ! Silicon power 512gb amzn.to/3Saq3Fy

Hello , It does alphabetical order normally. But yes you can arrange by folder name by moving folders around as you wish. Unless you’re using the smart playlist option which arrange by album , artist , BPM , or comments . Thanks.

Hello, tricky question. To my knowledge and what I would do ..is erase the lost playlist and then re-drop & drag back into engine dj … if you use sync manager / or try to drop them it back in .. it will duplicate and you will still leave a red track… as the file locations have changed . It’s not fun replacing playlists but might save time in the long run to just easer old lists and re put them back in from recovered usb or drive playlist . I actually just had to do this too.. due to a corrupt drive in my prime 4 . It’s like starting over .. which i pretty much did .. I uninstalled engine dj and then reinstalled it .. started from scratch and had to erase my prime4 drive too. Luckily i keep all my music on my laptop so these files are not affected by any engine software and then I just have add them back in engine and export them to drive again .. thanks and good luck. Linked video on erasing playlist . kzfaq.info/get/bejne/jayXdJRyvqyomKM.html I might try to make video tutorial myself in the future but might be a bit .. working on lots of projects. Thanks

After you format your new drive should be as easy as drop and dragging them on to your new drive … Windows wise ? Not sure with Apple computers? Thanks

@@DjMartiniMidwest Thank you for your response. I guess I did not explain it well enough. What I want to do is move the files that our on my current HD 2500 directly to my new HD 2500. My music manager on my PC got corrupted about a year ago and I only have about half of my playlists on my computer (it is a Windows system). What I am trying to avoid is having to rebuild about 20-21 playlists that each run about three hours of music (different genres). I was hoping there was a process to hook the two units together and transfer the music from the old unit directly to the new unit; thus bypassing the PC all together. Hopefully, that is a little better explanation. Thank you.

@@FLFrisbeeDog thanks for the extra info. Unfortunately besides cloning the drive with some type of software or cloning device . I’m not 💯 if that will work though if the files are corrupted. Sorry I can’t help more . Thanks

@@FLFrisbeeDog did you ever get a fix here? I’m in the same boat. I’ve got all my playlists, cue points saved on external SSD, but new laptop means I need to import the tracks, crates, playlists onto new laptop. I’ve been trying for days but no luck so far

@@briandonaldson4515 Unfortunately, I just ended up rebuilding all my playlist. Printed out copies of each to paper and then manually built everything again. It was a pain, but I now have two fully functioning units. A very serious drawback to their technology.

Thanks for watching and your question At 13:25 on this video kzfaq.info/get/bejne/pdp4h9CHlbW5qnU.html Possibly might help with serato library adding folders/ crates .

Good luck.🍀

Yes , the mixstream pro operates on the engine Dj software OS . So importing music / library should work the same . Thanks .

Thanks for the watch and your feedback.

Yes , it should still work with engine dj software. Thanks .

Yes , you should be able drop and drag from any files source.. into your library….If I under stand the question correctly. Thanks

@@DjMartiniMidwest from the actual controller that is

@@jeffgates1906 You can but it will mess up things later when you sync your engine dj library in my experience. I Learned the hard way. It confuses file locations and will leave your SSD with corrupted files or missing files. If & when you sync with engine dj . So Possible but not recommended in my experience. Thanks.

Thanks for watching and your feedback.

Appreciate you reaching out . Unfortunately I would rather respond to any questions on Facebook messenger. Reach out there at Dj Martini Services. Message me there and I will respond via text. thanks.

Thanks for watching and your thoughts. I agree ,, it is a little tricky but is possible. I found it easier to just drop and drag my files from my file manager, and make new playlist faster in my opinion. Thanks

Thanks for the watch. Sorry my video wasn’t helpful. Hopefully you get your questions answered with another video . Thanks for your feedback.

@@DjMartiniMidwest My bad, apparently a PC restart fixed the issue and I was able to drag and drop. I'm sorry for my poor temper (it's not an excuse, but) I was really sick at the time and very impatient. Thanks for your guidance.