That yeild is low. You'll find you have alot of gold your loosing somewhere. For example I just got a yeild of 8.97 grams gold from 4 pounds of trimmed gold fingers. I understand your units were kg. And know the difference after converting it still is low. Even the chips seem low. 1 biggie is when your burning the chips any that crumble will have gold falling loose through those holes down into the fire. And the gold wires are really just to tiny for a sluice or gold pan. Much better to use a beaker or at least a jar and add water let gold settle pour off 2 thirds of water and continue this till water is clean. Basically a tall round container were your gold stays at bottom and dusty ashes are washed away. You can probably double your gold yield here if you just tweaked a few things. Also I'd recommend getting rid of 90% of the base metals like copper before going to aqua regia. You will get less gold in your waist solutions that way. With your process your waist processing is gonna have a high yield later on down the road.

My friend, like you, I was opening the chips of the RAMs with a knife for a while, it took me a long time, then I heat as much as I can in the electric heater, take it with pliers, shake it in the cabin and spill the chips. It is easier. If you try it, you will see the difference. Greetings from Turkey 🖐👍

Keep it up, nice video, thanks for sharing it :)

Great video! Veery well done! Btw, just a little question: Why did you pour aqua regia and SMB at the end? Was it to separate gold from copper?

Thanks for the video friend the remaining 17 ram boards with fingers were those ddr too so because I noticed that the sizes were different containing upto 2 ic chips per ram board recovery rate is low did you do XRF analysis of the ic chips incinerated powder and did you check the presence of gold in the black leached sludge by AAS method I think gold was lost there.

Looks like the material you discarded as magnetic, wasn't 100% clean and likely had gold in it. If you reprocess all your waste, I'd expect another .3-.7grams yet. If not, that was super low yield material. 🤷‍♂️ I process 1980s stuff, the yields are incredible!

nice video. perhaps my suggestion if you add some CON2H4 before do SMB would more gold you would get. Its to neutralize the HNO3 that still strong on solution. Its effected on SMB process..

hi i like your videos i would like to know why you didn't use urea before the SMB?

Awesome video keep it up. I'd check your solutions on the gold fingers though. Yield seems too low on them.

Thanks for the informative video!

good video , thanks for sharing.Instead of sluice you can improvise a Miller table .That will be more effective

nice work easy method

Based on gold ram scrap price is 30-35 USD/kg a 0,51g gold/kg seems too low

Excellent 👌

Muchas gracias por tus conosimientos y Saludos desde las PALMAS DE GRAN CANARIA pero podrías subtitularlos en español

For ic chips do remove base metals and then directly add aqua regia...and for the boards u can directly apply aqua regia...it will save your time and the result will be same instead of collecting the foils and doing it

Easiest way to remove chips is with a heat gun its much quicker when do this in bulk, but male to do it in a well ventilated area because fumes or any smoke from the plastic will get breathed its not that bad its a few and it's a one time thing but if you do it in your home, it will smell faintly like burnt plastic. I'm sure that can't be good for your lungs.

good video. thumbs up from me

Do you denox pregnant solution before dropping gold with smb? If so, what chemical do you use for denoxing? Thanks.

I see no logic in the last sentence - 1kg ddr fingers contain 1-1.2g of gold and 1kg ddr chips the same, you must have more then 10kg of sticks to get 1kg chips and 1kg of fingers... something is very wrong here.

I've seen a lot of people lose their gold trying to use acid to pull out of the burnt chips

Double nice👍👍

👍🏾👍🏾

GOOD VIDEO LIKE

👍

Great work! That's awesome! I love doing that stuff toilet! I have figured out that on average you can recover 20cents of gold from flat screen T.V.'s. This video was amazing! God bless you and Marry Christmas 🎄

i think wet ashing is a better option for ics.

Süper 🔔👍

The carbon from the burned chips will bind up some of the gold

Where do you get those types of industrial grinders?

ETA MIXER TAKY SME MALI A BOLI K NEMU 2X NADOBA VELKA A MALA

سلام استاد لطفا در مرحله تیزاب ای سی رم درصد اسیدکلریدریک ونیتریک رالطف کنید

Quite relaxing to watch 😊... must be lots of toxic fumes though...

You didn't use urea for newtrolize the solution before adding SMB?

Elinize sağlık çöktürme işlemini yapamıyorum detaylı yazarmısınız

Filtering took two days? Why you can’t just add more hcl or distilled water to help filter it faster?

Is there any possible way to connect to you.

what exactly are you using as the filter material?

Welcome to my channel about gold

Sir why you didn’t use the aqua regia solution at 5 20

I'm trying to figure out how much gold is in a pound of trimmed gold fingers. Cuz I have roughly 6lbs.

Thanks for the effort of making this video the problem is that u dont explain wat u are doin in the video..no one can follow anything u are doin. One one knows the chemicals u are using and all that..

Where can you sell the chips?

slow the flow of water in the sluice

But that is not a correct or fair test because if you have double sided and single sided ram sticks there will be a difference in the weight of the trimmed fingers. For example if there are mainly double sided in the kg you will get fewer sticks so less trimmed fingers.

How many grams are extracted from one kilo of RAM for a computer?

Sir acid is costly cannot burn ram ? please sir

Ap na tazb k bara ma btya ni kn sa sb se pala use kia

bro do the same with ddr2 3 ram

Доброго времени суток Потери большие или что то не переработали

Can you use 50% Nitric Acid to separate the gold from copper? Just a question

Yeah that’s great and all except that’s not all gold bro what’s it really add up to when you have just the gold on there?

ETA mixer is best maschine.

1kg of DDr chip must have 1. g of gold

good video brother.silly question maybe..what does 2dl mean. I see it in most videos...thanks in advance.good stuff

Is that all you got?

تشکر به خاطر ویدئو ی سوال داشتم با چی ذوب کردید؟

Hello, how much gold is 8 kg ram?

Mag Kano po one kilos Dd r2

كيف تتخلاص من مادة رصاص

Please to pry to god for JABIR IBNU HAYYAN, He Mr Kemistri, inventor Aqua Regia..... 😇

no supiste hacerlo

Qwethen hello. I am a fan of yours and I would like to know where I can buy bulk electronic scrap to buy 3 kilograms? 😉

Dude, 1" wide chisel against a concrete step! Or, I've see a third world guy do the chisel on a slanted board with a stop in it, like he does it all day.

You are basically breathing toxic fumes by burning chips.

Mag Kano po memory ddr2 1 kilos

what is SMB

Smb powder ko hindi me kya kahte hain

i want ask you please name of aseet please and please

It hurts to me because i need ddr ram and i can't find it anywhere

I wish you were wearing PPE, man gloves at least.

Comic Sans ??? Really ?

a lot of hard work for 1gm of gold

+937 👍🎓

Usted es mudo hable para saber que esta haciendo gracias

I guess this is what happens when you create a video on a subject you're not actually qualified to show. There are so many areas pointed out in the chat, that you have got wrong. So if I can offer some advise to you, it would be: Do more research on the processes, because by posting videos like this, you're giving other people the wrong information that could cause them to injure themselves (or others).

Hardly worth the bother.

Nice not perfeck

Very bad process