How Much Lift to Fit 37s on a Duramax

Рет қаралды 55,665

GRAPPAHOLICS

4 жыл бұрын

Up close explanation of how to fit bigger tires on your new Duramax.

Пікірлер: 92

@Texas12valve 3 жыл бұрын

Love the stocks with the mud graps

@GRAPPAHOLICS 3 жыл бұрын

They only way to go!

@Texas12valve 3 жыл бұрын

@@GRAPPAHOLICS thinking about putting them on my ole 12valve. Its between them and interco super swampers ssr's.

@GRAPPAHOLICS 3 жыл бұрын

Texas 12valve Tough decision. I like how well the Graps perform on the road even though they look gnarly. Swampers are sick too though.

@Texas12valve 3 жыл бұрын

@@GRAPPAHOLICS its not a daily driver its just a project truck right now. Your channel put the mud graps in my head as a choice

@GRAPPAHOLICS 3 жыл бұрын

Texas 12valve Let me know what you decide. It will be badass either way.

@sunnydylan8034 2 жыл бұрын

What lift is it ? And front spacers?

@ismaelgodina7037 Жыл бұрын

How wide are the 37s y’all put on the black truck?

@sandraodom8075 2 жыл бұрын

Can you send the link for the lift kit I can’t find it anywhere

@maddoxbonner9729 3 жыл бұрын

What model is the black one...2017?

@dwight_kovich 3 жыл бұрын

What spacers is he running?

@Boostipher 3 жыл бұрын

What lift kit is this

@streetdreamz-houstontexas9907 2 жыл бұрын

Were any spacers used?

@noelochoa4499 3 жыл бұрын

So all you did was level with 37's no spacers?

@Adrian-mh8zd 3 жыл бұрын

What suspension upgrades does the silver Denali have? Is there a video on that build?

@GRAPPAHOLICS 3 жыл бұрын

I don’t know much about that one unfortunately, I think it was just leveled with minor trimming

@vvnoxvv1716 3 жыл бұрын

I have a 2013 GMC LML with 37s by 13.5in wide on a BDS 6.5in lift and barely notice the rubbing of tire, i can do a U-Turn with ease but I've been wanting to try the 38s soon

@GRAPPAHOLICS 3 жыл бұрын

38s look pretty sweet. If you don’t mind a little rubbing I’d go for it

@Boostipher 3 жыл бұрын

What’s your wheel offset

@sunnydylan8034 2 жыл бұрын

@@GRAPPAHOLICS what suspension is the black one

@GRAPPAHOLICS 2 жыл бұрын

@@sunnydylan8034 I believe it is FTS, Full Throttle Suspension

@sunnydylan8034 2 жыл бұрын

@@GRAPPAHOLICS I can't find the one for this model

@realistic.optimist 5 ай бұрын

Cognito 4" and my 37x12.5's fit fine.

@urielreyes1844 23 күн бұрын

What year is yours, any trimming? I have this setup and I’m debating on going with 37s

@DylanMartinRacing 4 жыл бұрын

Norcal cut is the only way I could get 37’s to fit on my duramax with a 6-8” fabtech

@GRAPPAHOLICS 4 жыл бұрын

That’s so frustrating, I was running 38x15.50s on a 1in leveling kit on my last F250 from a couple videos ago. Round wheel wells just make sense.

@50calops 4 жыл бұрын

It sure is clean.

@GRAPPAHOLICS 4 жыл бұрын

Thanks Mo! I thought so too. Can’t wait to get started on the truck I bought the other day

@BornToBeFamed 2 жыл бұрын

Hard to beat this look

@GRAPPAHOLICS 2 жыл бұрын

I agree 100%

@eldindzeko5456 3 жыл бұрын

think i can fit 35s graps with stock rims and stock level on a 2021 chevy 2500 duramax?

@GRAPPAHOLICS 3 жыл бұрын

You should be able to. Maybe a tiny bit of trimming on plastic

@cturner0088 2 жыл бұрын

You can run 37s with just new keys on the 2020 +

@cturner0088 2 жыл бұрын

There is way more fender room on the new ones

@John-Mahoney 3 жыл бұрын

So leveled with 37’s works? How much cutting involved?

@GRAPPAHOLICS 3 жыл бұрын

I’m not sure I don’t know the guys very well that had it. Seems doable though with minor trimming

@cturner0088 2 жыл бұрын

You can run 37s on 3 Inch leveling kit with aftermarket upper control arm. I have 36s on mine with just aftermarket keys

@Em_jiggy 2 жыл бұрын

Anyone fitting 37s on a leveling kit? Been researching everywhere but there’s very little info out there

@ethanconard2178 Жыл бұрын

Yeah, go look up everydayoffroad. He has 37s on a level and shows you tire clearances and how they were achieved.

@Em_jiggy Жыл бұрын

@@ethanconard2178 thanks for your reply! I’ve seen his video but his are 35s on a 4 inch lift. Unless I’m looking at the wrong video? 🤔

@ashtonschaffer4754 3 жыл бұрын

Where can I find a 4-6 inch lift? I only see basic 6 inches I can’t find a 4-6

@cturner0088 2 жыл бұрын

Run a Incognito lift. Best kit for the nali'

@Back_door_bandit_98 3 жыл бұрын

Dang seeing these L5Ps leveled on 37s makes me want to swap out my 35s but I'm running 2 inch spacers so idk (2016 2500 silverado 6.0 gasser)

@GRAPPAHOLICS 3 жыл бұрын

Stocks and 37s without the spacers looks great to me but I’m not sure exactly what they had to do for fitment

@Back_door_bandit_98 3 жыл бұрын

@@GRAPPAHOLICS yeah I'm running stocks with 35s and 2 inch spacers fully cranked torsion bars 🤦‍♂️ fixing to order 7.5 inch rough country lift and 24x14s Arkon wheels not sure which style I'm gonna go with definitely chrome tho.

@GRAPPAHOLICS 3 жыл бұрын

@@Back_door_bandit_98 Stocks and Graps is clean but I understand wanting 24x14s. I had some on my f250 for a while. I like both looks

@Back_door_bandit_98 3 жыл бұрын

@@GRAPPAHOLICS been watching alot of your older videos crazy you don't have more subs than this your old f250 looked amazing.

@GRAPPAHOLICS 3 жыл бұрын

@@Back_door_bandit_98 much appreciated boss! KZfaq is tough to grow on but I’m having fun

@Adrian-mh8zd 3 жыл бұрын

What year is the silver GMC in the video

@GRAPPAHOLICS 3 жыл бұрын

I’m not sure honestly, I haven’t been back in that area for a while to ask him

@juicedelco 4 жыл бұрын

What size spacer was the Denali running ?

@GRAPPAHOLICS 4 жыл бұрын

ACanela85 2in

@dwight_kovich 3 жыл бұрын

GRAPPAHOLICS bet

@prestonlawhorne6500 2 жыл бұрын

@@GRAPPAHOLICS without the spacers would he be rubbing the knuckle?

@Cwilliams_97 2 жыл бұрын

Any details on that high country?

@GRAPPAHOLICS 2 жыл бұрын

I don’t know much about it unfortunately. What did you want to know?

@coopercrawford9731 3 жыл бұрын

Do you think I can fit 20x10s on a 2005 Ford Ranger with a 4 inch lift?!?

@GRAPPAHOLICS 3 жыл бұрын

What size tires? That’s hard to say I’ve never had a ranger

@coopercrawford9731 3 жыл бұрын

@@GRAPPAHOLICS 33 inch

@GRAPPAHOLICS 3 жыл бұрын

@@coopercrawford9731 sounds like it would be worth a shot. I don’t mind a little rubbing personally

@coopercrawford9731 3 жыл бұрын

@@GRAPPAHOLICS thanks man I'm gonna give it a try!

@GRAPPAHOLICS 3 жыл бұрын

@@coopercrawford9731 let me know how it goes. Make sure you do your research

@austintabor553 3 жыл бұрын

What’s that silver Denali have in this video? Any spacers?

@GRAPPAHOLICS 3 жыл бұрын

I believe just a 3in leveling kit with no spacers

@ryandominguez4249 3 жыл бұрын

I need to know more on the silver Denali please. I was thinking about doing a 4.5” bds lift with stocks and 37s but now I want to do a 4” cognito lift after seeing this. What did he have to trim? What lift/leveling kit?

@GRAPPAHOLICS 3 жыл бұрын

@@ryandominguez4249 that’s all I know about it. Ol try to find out more

@ryandominguez4249 3 жыл бұрын

Awesome. I appreciate it!

@goelat2267 3 жыл бұрын

Y’all know anything one who runs a 4in lift on 17in wheels with 37s ? On a 2500 Sierra ?

@buddyrouse3439 4 жыл бұрын

Seen you at MBN

@GRAPPAHOLICS 4 жыл бұрын

I had a great time up there! About to get started on my dream truck and hopefully I’ll be back at some shows before long

@chrisdavis3952 2 жыл бұрын

How do you afford it?

@GRAPPAHOLICS 2 жыл бұрын

This is one of the few videos that isn’t about my personal truck. My friend that owns the black truck works with his family’s business and has some side hustles

@rickketchumn4458 4 жыл бұрын

Wheel wells on them gm square just don’t care for them

@GRAPPAHOLICS 4 жыл бұрын

Yeah they just don’t make any sense and the round tire doesn’t really look right in he square hole either

@jaimedominguez9460 3 жыл бұрын

Y’all aren’t worried about the tires flying off with spacers on them?

@GRAPPAHOLICS 3 жыл бұрын

If you get quality spacers that are installed correctly you shouldn’t have any issues. I ran spacers on my f250 for a couple of years before I sold it and it still has them on it from what I’ve seen

@jaimedominguez9460 3 жыл бұрын

What spacers would you recommend ?

@GRAPPAHOLICS 3 жыл бұрын

@@jaimedominguez9460 I had shifted industries spacers and they were great. A simple but important safety thing to mention with spacers is making sure that the spacer is wide enough to completely cover the factory studs. Of the tips of the studs barely stick out past the spacers then you are riding on finger tips basically and that’s a good way to loose a wheel. Also I prefer one piece spacers, some people trust the ones you have to bolt together before installing but I wouldn’t recommend them.

@GRAPPAHOLICS 3 жыл бұрын

@@jaimedominguez9460 also I have a video of my spacers being installed and the studs had to be trimmed to avoid what I mentioned above. Here is a link to that video and the spacer part is around minute 7:30 in the video. kzfaq.info/get/bejne/Y7hklsuI1a7Ql3k.html

@jaimedominguez9460 3 жыл бұрын

@@GRAPPAHOLICS thank you brotha much appreciated

@andyimo 3 жыл бұрын

That black Denali is sex on wheels

@ismaelgodina7037 Жыл бұрын

Never mind I saw the sticker.

@GRAPPAHOLICS Жыл бұрын

No worries. Thanks for watching

@patrickezuma7140 2 жыл бұрын

Yeah those don't fit. I running a Sierra myself and I know for a fact anything bigger than 35's (actually 33's) will rub unless you put a 12 or 14 inch lift on it. It doesn't do you any good to have a tire so big that in order to turn the truck you have to baby it, the first curb you hit rolling off the highway into a fuel station and that tire is into the wheel well. Still a sharp looking truck but no good off road...pavement princess. I suppose a truck that expensive with all those add on's won't see anything but pavement anyways but still....