How not to demagnetize you Watch Trail #1 Again another Fail :D

Рет қаралды 5,597

2 жыл бұрын

In this video, I am trying and failing again to demagnetize my watch, hope you learn from my mistakes as I sure learned from mine. I also sent back that magnetizer, and I will purchase a better one in the near future. If you have any suggestions please leave them in the comments below.
Thank you for watching. If you have any questions or comments, be sure to leave your comments down below. Please don't forget to like and subscribe to my YT Channel and Instagram as well :)
Follow My Instagram for daily shots:
/ abdulr_watches

Пікірлер: 40

@PickAnyNameButMine 2 жыл бұрын

You really need to get a compass! Pass your watch over a compass, and if the needle moves it is magnetised, if the needle doesn’t move it is not magnetised. Tiny, tiny movements on the compass does not mean a watch is magnetised. I believe that you can also magnetise a demagnetised watch using the blue box, which is why it is always best to use a compass alongside the blue box. I would always have and use a compass with any demagnetiser. I hope this helps you in the future.

@AbdulRWatches 2 жыл бұрын

I will definitely get a compas from ebay, thank you very much for the tip.

@OmarZ77 2 жыл бұрын

I was going to suggest that you keep it on the demagnetizer for 2 seconds before pulling it up, but you kind of did that in the 2nd attempt. I never demagnetized my watch but I’ve seen people do that and repeat it a couple of times, each time leaving it on the demag for 2 seconds before pulling. Either way this makes me glad I never attempted it 😂 Thank you for sharing!

@AbdulRWatches 2 жыл бұрын

hehe Thanks Omar, I definitely learned that I need a better device, and I will take the watch to my watchmaker next time I get one of my watches serviced 😁

@bigriceburner 15 күн бұрын

I purchased a demagnetizer very similar to yours.I have seen a few videos on the subject since you made your video and I have come to the conclusion that if you do not touch the device you will not magnetize The items that you were trying to demagnetize.Also as I understand it if you move your watch in different directions you will scramble the magnetic force in different directions as you pull it away slowly.As I understand it just confuses the whole magnetic field that’s making your watch nonmagnetic I have use this with some success but I don’t have a proper timegrapher only an app on my phone. I’m also curious to know if you have come up with new ways of using this device and if you have had success please let me know.

@AbdulRWatches 15 күн бұрын

Thanks for watching and commenting, I ended up taking it to my watchmaker for a service. I think investing more in a better one and learning more before doing it are my two tips for the next time 😁

@Shadowman-1960 9 ай бұрын

When checking a watch for accuracy the lift angle on the timegrapher should be set to match the watch that is being tested, because they are not all the same.The lift angle on the SARB017 Alpinist is 53 and not 52 like yours is set on the timegrapher. Also when demagnetizing a watch it should rest on the demagnetizer for ten seconds while pushing in the button and then slowly lifted off while keeping the button depressed. These tools will only work correctly if they are used correctly. I hope that helps.

@AbdulRWatches 9 ай бұрын

That helps a lot, definitely will remember this for the next time. Always learning new things in this hobby of ours 😁 Thanks for watching and commenting.

@GG-lz4gz Жыл бұрын

Hi, Abdul. I recently purchased this same demagnetizing unit and really messed up my watches. They are running wildly inaccurate now. What did you/your watch maker do to fix the watches? Thanks for posting.

@AbdulRWatches Жыл бұрын

Hi GG, oh that's really unfortunate. I had to take the watch to my watchmaker here and he had to demagnatise it, it worked pretty well afterwards.

@22061969afable 2 жыл бұрын

Hallo Abdul kannst du Mal Erklären wie das mit dem Entmagnetiesierer Funktioniert habe das gleiche Gerät und weiß nicht wie Anwenden muß. Danke,Danke⌚⌚👋👋☯💚

@AbdulRWatches 2 жыл бұрын

Hallo Andreas, Die Idee der Entmagnetisierung besteht darin, die Uhr zu magnetisieren und sie dann aus dem Magnetfeld in ein schwächeres Feld zu verschieben, so dass die Uhr entmagnetisiert wird. Ich hoffe es hat geholfen, ich hol mir noch ein besseres Gerät und wird ein neues Video machen :D

@SianaGearz 8 ай бұрын

@@AbdulRWatches ja nun mit einem Permanentmagneten kannst du schlecht etwas entmagnetisieren. die Idee ist dass sich das Magnetfeld 100 Mal die Sekunde wechselt. Und mit jedem Schritt landet es nicht nur in einem schwächeren Magnetfeld, sondern auch in einem von umgekehrter Polarität, so dass die Magnetisierung vom letzten Schritt entfernt wird, und eine umgekehrte Magnetisierung etwas schwächer wieder zugeführt wird. Wenn du es nicht ganz gleichmäßig machst, brichst du die Sequenz. Auch ist ein Problem dass eine Uhr Metallteile enthält, die sich bewegen oder gar von jenem Magnetfeldwechsel bewegt werden. Die mussen extra langsam und gleichmäßig gehoben werden. Bei einem besseren Werkzeug wäre allmählich schwächer werdendes Magnetfeld automatisiert.

@AbdulRWatches 8 ай бұрын

@@SianaGearz vielen Dank für die Erklärung, man lernt viel durch solche Experimenten 😊👍🏽

@snoworder 2 жыл бұрын

I can't see this in your video but when i press button on my similar demagnetiser it starts buzzing a bit. This way you know so it actually does something.

@AbdulRWatches 2 жыл бұрын

Yes, it did start buzzing and I felt that the watch is being pulled down to the device.

@NhanNguyen-ci6bb 2 ай бұрын

If I do it multiple times, will it have any effect on my watch?

@AbdulRWatches 2 ай бұрын

I think so, then idea is to get it from the first time with enough time on the device. But it could demagnetise it and magnetise it again if used multiple times.

@MsBricktop80 2 жыл бұрын

Moin Abdul, schon wieder verschlimmbessert! :-) Ärgerlich auf jedenfall weg damit. LG Mario

@AbdulRWatches 2 жыл бұрын

Moin Mario, hehe ganze genau, also lieber lass ich 😂😂 LG Abdul

@behonestwithyourself3718 8 ай бұрын

I dont think your suppose to touch the watch to the machine. That will magnetize the watch. Hard to tell. It looked like the first time you touched it to the machine.

@AbdulRWatches 8 ай бұрын

Yeah, I think so as well. The guide turned out to be more of what not to do when demagnetizing a watch 😁

@behonestwithyourself3718 8 ай бұрын

@@AbdulRWatches I know it's sketchy, I ordered one of the oval style machines but I'm hesitant to try it. It seems like a lot of people have success. I guess you've gotta just go for it and learn as you go.

@AbdulRWatches 8 ай бұрын

@@behonestwithyourself3718 Exactly, practice makes perfect. Learning by doing is the most effective way to do it.

@johncunningham5435 2 жыл бұрын

Most unfortunate: Yes! that particular demagnetizer is a very low end device and not worth the money. The higher priced units are more effective at removing any magnetic fields. I have cheap battery operated unit that is somewhat effective, but not as effective as the professional models that can be quite expensive. Judging by the operation of your current unit suggest a fault or is not properly shielded.

@AbdulRWatches 2 жыл бұрын

I returned it as it was really not worth the money, I will invest in better equippment and maybe try over the end of the year vacation to experiment with it. Thanks John for watching and commenting, have a great weekend!

@SianaGearz 8 ай бұрын

Nah it cannot be faulty because it's so simple there's nothing to build wrong and there's no shielding foreseen in principle, nor needed. It's just not great. A PTC series resistor would potentially make it better, not calculated which one it should want and haven't tried.

@AbdulRWatches 2 ай бұрын

Yeah, I think that was a user error.

@allenwalters8812 2 ай бұрын

I couldn't get my demagnetize to work until I watched a guy using a plate demagnetize. He turned it on and started from one side and dragged it all the way across. I did that and it completely demagnetized it. I have the same unit and I was doing it the way you did.

@AbdulRWatches 2 ай бұрын

Great, thanks for the tip. Yes, I ended up going to my watch maker to demagentizee it 😁