How PLUMBERS Install A Radiator WITHOUT Draining Down

Рет қаралды 8,672

Жыл бұрын

#plumber #plumbing #heating
In this video, I'll show you how to install new radiator using a pipe freezer instead of draining down the heating system. You will see me freezing the pipework, installing valves and soldering copper pipe work .
You can hire this equipment yourself for most tool hire centres. They are relatively simple to use, a huge time saver and can save creating air locks in a heating systems when used correctly.
2 Port Zone Valve FAILURE, How To REPAIR
• Commercial Heating Sys...
Bathroom Renovation: From Bath To Shower | Part 1
• Bathroom Renovation: F...
Bathroom Renovation: From Bath To Shower | Part 2
• Bathroom Renovation: F...
WHY MOSS ELECTRICAL & PLUMBING?
Whether its installing a new light fitting, repairing a faulty water heater, or fitting out an entire restaurant, MOSS Electrical & Plumbing can complete the project from concept to completion.
🛠️ 𝐈𝐟 𝐲𝐨𝐮 𝐥𝐢𝐤𝐞 𝐭𝐡𝐢𝐬 𝐯𝐢𝐝𝐞𝐨, 𝐩𝐥𝐞𝐚𝐬𝐞 𝐥𝐢𝐤𝐞 𝐢𝐭 𝐚𝐧𝐝 𝐬𝐡𝐚𝐫𝐞 𝐢𝐭.
🛠️ 𝐃𝐨𝐧'𝐭 𝐟𝐨𝐫𝐠𝐞𝐭 𝐭𝐨 𝐬𝐮𝐛𝐬𝐜𝐫𝐢𝐛𝐞 𝐭𝐨 𝐦𝐲 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐟𝐨𝐫 𝐦𝐨𝐫𝐞 𝐮𝐩𝐝𝐚𝐭𝐞𝐬.
/ @moss_electrical_...
My Website: www.mossep.com/
📞 01622 535417
📞 07949 295729
About Us:
MOSS Electrical & Plumbing Ltd has been owned and operated to the highest standards in the industry. For over 20 years, MOSS Electrical and Plumbing have been serving Kent, London and the South East, developing long lasting relationships with customers across the domestic, commercial & industrial sectors through consistent, quality delivery of plumbing and electrical services.
🔎 Hashtags:
#diy
#plumbing
#diyhacks
#homerenovation
#heatingsystem

Пікірлер: 40

@getawayhs2856 2 ай бұрын

Add some valves, of course, then you have all the time in the world to get the rad right - just saved me trying to get a plumber in. Thank you.

@moss_electrical_and_plumbing 2 ай бұрын

Thanks for the comment, glad you found it useful 👍😁

@leep8981 Жыл бұрын

Love the isolaters nice touch

@moss_electrical_and_plumbing Жыл бұрын

Thank you Lee! 👍

@byronstrawbridge1909 Жыл бұрын

I'm loving these videos, currently doing my house up. So these tips are helpful. Plus this plumbing geezer is easy on the eye 😬

@moss_electrical_and_plumbing Жыл бұрын

Thanks Byron, glad they are useful to you. If you give me your email address I can send you some uncut photos from the video, I think you might like them 😉

@byjingobob Жыл бұрын

Neat install, I am impressed with those pipe benders, no faffing with formers.

@moss_electrical_and_plumbing Жыл бұрын

Cheers Bob 👍. The benders are great, they are a real pleasure to work with

@user-zj9fy8rl8p Жыл бұрын

Job well done as usual.

@KendalSmithy Жыл бұрын

I like the little offsets you put in the vertical pipes; most guys would just put one bend in. Re. the compression fittings, I always add a very thin layer of compound inside the olive as well, so its seal with the pipe is guaranteed.

@moss_electrical_and_plumbing Жыл бұрын

The compound works great, I can’t remember the last time I had a compression fitting leak since using this method, unless I forget to do one up - like in this video 🤣

@phrendly888 Жыл бұрын

Great video, very informative 👍

@moss_electrical_and_plumbing Жыл бұрын

Cheers mate, glad you liked it 😁

@owsi2297 Жыл бұрын

Great job 👍

@moss_electrical_and_plumbing Жыл бұрын

Thank you 👍

@user-zj9fy8rl8p Жыл бұрын

Nice one MEP

@moss_electrical_and_plumbing Жыл бұрын

Thank you! 👍

@moss_electrical_and_plumbing Жыл бұрын

Please LIKE and SUBSCRIBE if you find the video interesting 👍😁

@dejanmyrtaj1997 Жыл бұрын

Thanks

@Razz60 Жыл бұрын

Just come across your video ive liked an subscribed very good workmanship, could you do a video on how to use them monument pipe benders like where to mark pipe etc to do offsets, pass overs etc would appreciate it thanks

@moss_electrical_and_plumbing Жыл бұрын

Thanks Razz, much appreciated 😁. I'll see what I can do about a video on pipe bending when I get chance 👍

@Razz60 Жыл бұрын

@@moss_electrical_and_plumbing thank you ive just watched your bathroom refurb video really good thanks for taking time out to film

@waseemkhaliq933 Жыл бұрын

I would have put a tee on end and put the drain valve into it instead of it being in the middle of the pipe work

@moss_electrical_and_plumbing Жыл бұрын

That would look better, this pipe work was being boxed in though so it wouldn’t have been accessible if I had done that

@dejanmyrtaj1997 Жыл бұрын

I wanted to ask if it is easy or difficult to install central heating as a beginner who has finished the 4 month school for hvac systems, where should we base ourselves

@moss_electrical_and_plumbing Жыл бұрын

I’d imagine that you could understand the concept of the heating system, and possibly design how it should be set out on paper, but I doubt you would have the practical skills to be able to do it after 4 months.

@dejanmyrtaj1997 Жыл бұрын

@@moss_electrical_and_plumbing thanks

@AlexRocks24-7 Жыл бұрын

Great job but i always see the TRV's go on the right 😏

@moss_electrical_and_plumbing Жыл бұрын

Thanks Alex 👍 Why do you put them on the right?

@AlexRocks24-7 Жыл бұрын

@@moss_electrical_and_plumbing kzfaq.info/get/bejne/Zr-Ah5Srp6vSnH0.html&feature=share9

@AlexRocks24-7 Жыл бұрын

@@moss_electrical_and_plumbing I always have and always see them on the right 🤷

@AlexRocks24-7 Жыл бұрын

@@moss_electrical_and_plumbing 90% of us are right handed and I think that's why they recommend putting them on the right so easier to use 🤷

@moss_electrical_and_plumbing Жыл бұрын

Ive never heard that, if it works for you though then stick to it 👍. Just watched that link you posted, never knew you could balance a rad using the TRV, I like that 😎

@cassimoss9634 Жыл бұрын

What pipe freezer are you using?

@moss_electrical_and_plumbing Жыл бұрын

www.arctic-hayes.com/Catalogue/Pipe-Freezing/Arctic-Electric-Pipe-Freeze-Kits/ARCTIC-ELECTRIC-110v-8-42mm-ARCEL110 Its quite expensive, but pays for itself over time 👍

@kaiwalton4528 Жыл бұрын

Absolutely shocking putting an iso on central heating

@tyronesylvester8522 Жыл бұрын

I was thinking the same, and if you touch it later that's a definite leak

@moss_electrical_and_plumbing Жыл бұрын

The reduced bore ones can leak, but not full bore, unless you buy them really cheap they have a higher temperature rating

@edthelasttribe9580 Жыл бұрын

Have you checked coding on central heating U.K. , this valves are not suitable for central heating, what happens when other plumber comes in and does the power flush ? Chemical’s could eat the glance washer and it will weep trough a screw slot head , once you pressurise the central heating system . I understand it’s a quicker way , but that’s not permanent solution. It wouldn’t cover accidental house insurance and your liability insurance, you have to think smart 😂, I’m only here to help you out

@moss_electrical_and_plumbing Жыл бұрын

Given that you use the word ‘code’, I assume you are not from the UK?