No video

How Repaint A Carbon Bike Using Spray Cans / 3 Color Combination Rebrand

  Рет қаралды 18,225

chrisworx customs

chrisworx customs

Жыл бұрын

#samuraipaint #spraypaint #custompaintjob
Maraming Salamat sa buong Alvarez Family and SPA Transport sa puwesto para akoy makabuga
Maraming salamat sa patuloy na pagsuporta, patuloy lang na mag like, share at mag subscribe sa aking channel mga kaBaga
puwede din kayong mag send ng message sa aking FB Page
m.facebook.com...
para sa magtatanong kung saan location ko
sa Maybunga Pasig po ako
Lagi din tandaan na wala sa pintura ang ikakatagal ng isang paint job, dahil kait original na pintura pa yan, mababakbak at magagasgasan pa din kung hindi din maingat sa pag gamit
Disclaimer
-This video, including examples, images, and references are provided for informational purpose only.
-The names and logos used may be the trademarks of their respective owners, no copyright infringement is intended
-Credits shall be given to the rightfull owners of the brand names and logos
Ito ay isang amateur paint job lamang, ang aking mga gawa ay base lamang sa aking karanasan, kaalaman at opinyon, maaring makakita ng mga pagkakamali sa mga bawat bahagi ng proyektong ginawa
Maaring magkomento para sa inyong mga tanong suhestiyon para sa videong ito
Huwag din kalimutan mag Like, Share, Subscribe at pindutin na din ang Bell Button para updated sa mga bagong videos at tutorials
Maraming Salamat

Пікірлер: 46
@jasonphair7619
@jasonphair7619 Жыл бұрын
This is a very, very, very nice color combinations. I just love it. My favorite colors, black and white.😎👌👍
@seanalfredlim7569
@seanalfredlim7569 Жыл бұрын
Iba ka tlga lodz👌
@MY-to9ht
@MY-to9ht Жыл бұрын
Nice tutorial!!! Quick question, is it ok to use the primer as the final colour if it is already the colour I’m going for? So I am thinking, sanding -> primer -> sanding -> clear coat. Thanks in advance!
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
thanks for watching yes thats fine and can be done👍
@Dbreaker01
@Dbreaker01 Жыл бұрын
Ganda ng mga gawa mo bossing. Tanong ko lang po kung ano mas magandang primer sa aluminum, epoxy primer or etch primer?
@sadiaboi
@sadiaboi Жыл бұрын
Hello sir, question lang, bakit po nag aapply ng clear coat in between coats? Curious lang, sana mapansin. Thanks in advanced!
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
kasi kinabukasan ko sya ginagalaw ulit nilalagyan ko sya kahit 1 layer ng clear para pag niliha ko na ung clear coat ang masusugatan o makakaskas instead ma ung color coat
@sadiaboi
@sadiaboi Жыл бұрын
@@chrisworxcustoms ah okay okay, thanks.
@godwingeneroso217
@godwingeneroso217 Жыл бұрын
@@chrisworxcustoms same samurai clearcoat with hardener parin po ba gamit niyo? Pag nag aapply kayo ng clearcoat between coats?
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
@@godwingeneroso217 nope kasi magastos at mahal pag epoxy pa gagamitin ko, ordinary clear lang kasi lilihain ko lang din naman
@gevenleyson414
@gevenleyson414 10 ай бұрын
pag nag repaint mas gaganda frame magmukhang bago kaso mas bibigat sya kaya ako tiis n lng sa mga gas gas atleast nabawasan p ng bigat😊
@chrisworxcustoms
@chrisworxcustoms 10 ай бұрын
weight weenie 👌
@Tibiscuit_OW2
@Tibiscuit_OW2 5 ай бұрын
Hey, good job! Where can we buy custom stickers to use as stencils like you did in the video for logos? thanks in advance
@chrisworxcustoms
@chrisworxcustoms 5 ай бұрын
thanks, you can check online for some vinyl sticker or oracal masking films or just ask your local sticker shops if they can cut out some stencils for painting
@duongdo197
@duongdo197 Ай бұрын
How much time did you spend sanding the hole bike frame?
@chrisworxcustoms
@chrisworxcustoms Ай бұрын
more or less 5 hours I think
@MichaelZike
@MichaelZike 21 күн бұрын
Tig iisa bang spray can sa isang frame and fork? Salamat boss
@chrisworxcustoms
@chrisworxcustoms 20 күн бұрын
frame set atleast 2 cans
@mtbarena6652
@mtbarena6652 Жыл бұрын
Make a full proces video of painting like UNITED CLOVIS 5.10 cycle paint...Red+gray
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
maybe someday👍
@mtbarena6652
@mtbarena6652 Жыл бұрын
@@chrisworxcustoms plz make it soon...waiting for that🥹💔
@janyor
@janyor 8 ай бұрын
Sir chris anong tape yung gamit mo pang mask sa frame para di tumagos ang paint
@chrisworxcustoms
@chrisworxcustoms 8 ай бұрын
painters tape TmX ung brand
@ravencruz2060
@ravencruz2060 Жыл бұрын
Any tips po pano mag repaint ng carbon fork at ano maganda brand ng can spray
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
full carbon frame at fork na po yang nirepaint
@estong126
@estong126 Жыл бұрын
boss ask po ako sa ibang brand na spray .. maliban sa samurai..kahit anong brand pd bang gamitin sa carbon.... frame.....
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
pwede naman kahit ibang brand
@reymartalano370
@reymartalano370 Жыл бұрын
Lupit
@redcloud5258
@redcloud5258 Жыл бұрын
Sana mapansin. Gusto ko pinturahan yung bike ko kaso May kalawang siya sa ibang bahagi ng frame? Ano gagawin ko para maging maayos ang pagpintura ko?
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
dry sanding, wag mo babasain para hindi na ulit manilaw pagtapos mo lihain at matanggal mga kalawang, ang ipang linis mo lacquer thinner, tapos basahan na malinis nood ka sa mga ibang vids ko may mga bakal ako na na pinturahan na, ung sobrang lumang upload na steel frame paint job medyo mali un kasi binabasa ko dati pag nagliliha ng bakal😂
@redcloud5258
@redcloud5258 Жыл бұрын
@@chrisworxcustoms Salamat po sa sagot mo. New subscriber mo na ako
@godwingeneroso217
@godwingeneroso217 Жыл бұрын
Tanong lang kung magkano po lahat gastos niyo nag eestimate kasi ako planning to repaint my frame. sana mapansin salamat!
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
more or less 1k sa paint
@muhamadilham2199
@muhamadilham2199 11 ай бұрын
Apply clear coat means 2k01 right ?
@chrisworxcustoms
@chrisworxcustoms 11 ай бұрын
no, just the ordinary clear coat 2k01 is very expensive, use 2k01 for final clear coat
@muhamadilham2199
@muhamadilham2199 11 ай бұрын
notedd with thanks ! superb repaint@@chrisworxcustoms
@padyakol5674
@padyakol5674 Жыл бұрын
Boss papintura ako batalya at fork pano ka makontak.
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
mag PM po kayo sa page
@godwingeneroso217
@godwingeneroso217 Жыл бұрын
Bro san ka nakabili ng nozzle
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
sa mga samurai paint ko nakukuya ung fan type na noozles iniipon ko at linis pag naubos na ung paint
@bernardchryslerignacioruiz3677
@bernardchryslerignacioruiz3677 Жыл бұрын
Bakit hindi primare gray ginamit?
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
di naman sa lahat ng oras primer grey lang ang gagamitin, sa pagkakataong yan may natirang pintura dahil niliha lang kaya surfacer ang ginamit kung primer grey lang meron ka pwede din naman
@manjeetmalhi6476
@manjeetmalhi6476 Жыл бұрын
Sr nasa magkano po repaint nyo?
@chrisworxcustoms
@chrisworxcustoms Жыл бұрын
2,800 starting price final price depende sa design msg nalang po kayo sa page kung anong gagawin sa bike Maybunga, Pasig location
@zzhunt3254
@zzhunt3254 3 ай бұрын
This îs how not paint a bike😂
@jenshotop
@jenshotop Ай бұрын
the heck you sayin bruv😂
paint a bike with spray paint and spray cans
29:56
ETOE
Рет қаралды 487 М.
Каха заблудился в горах
00:57
К-Media
Рет қаралды 11 МЛН
Magic trick 🪄😁
00:13
Andrey Grechka
Рет қаралды 31 МЛН
Little brothers couldn't stay calm when they noticed a bin lorry #shorts
00:32
Fabiosa Best Lifehacks
Рет қаралды 17 МЛН
Painting Your Carbon Bike Frame like a Pro-Step-by-Step Tutorial
7:36
Why You Shouldn't Sand your CARBON Bike Frame by Hand...
10:11
Cade Media
Рет қаралды 53 М.
remove and strip paint from carbon fiber
21:17
ETOE
Рет қаралды 185 М.
HOW TO CUSTOM SPRAY PAINT YOUR BIKE AT HOME
8:26
Mete
Рет қаралды 239 М.