WOW, I couldn't imagine having to do that with saw or cutting torch. What a time saver. Clean edges and no oily mess. Cool tool !

If one machine can stop your shop you need a second. People can use both at the same time but, more importantly if one goes down you have a spare.

Miss you Ron!!!!! I am still in California and every time I drive by the old shop off the frwy I wave hello....

I agree. My service division purchased a Piranha to cut, bend, and punch copper bus bars in the field. Saved a bunch of time. We mounted it on a utility trailer with generator and soft-start starter. Paid for itself after a year.

Beautiful piece of equipment. I just love machinery that makes a job easier. Doing it OLD SCHOOL is okay, but glad the technology exists for making a job go quickly and easily.

big safety oops . no safety glasses the jaws can shatter on them . i have been a steel worker for 36 years . me and my dad was punching thousands of holes the next day the die busted and my dad was left with a piece in his chest. our old co owner was copeing angle it exploaded he is missing a eye now. VICTOR just be safe .love your shelters.

Ron, you just became Piranha's No. 1 salesman!

From house installs to machine shop work, good content brother

Awesome insight Ron! Thanks

*Atlas Survival Shelters* Very nice, thanks for taking the time to show us. ((Ironworker))

That is and awesome tool presses and punches save a lot of time and energy. My number 127

You take good care of the jaws on that sheer and it will pay off in spades. A regular grease and maintenance schedule won't hurt either.

Thanks Ron, I find another interesting video about tour company 🙂

Thanks for the explanation.

One of the best shills I've seen, that's not even an insult, the thing looks awesome!

"The Piranha" is a real time saver. I used one when was learning to weld. 556

That Piranha really does it all!! Great work!! Great video!! 230

we have a piranha and use it for everything cut, bend, nibble we even have dies that saddle pipe, such a great machine

Great machine, saves you lot of time.

Thats a sick Machine damn!

That machine is bad ass I have no use for one but I could just cut steel it looks so satisfying

That is really nice machine it cuts so effortlessly....

79 :) That piranha sure saves lots of time. Chews through anything fast, even steel!

Awesome video Ron! I was wondering where your videos had went. Used to pop up on my feed all the time but not lately. My job has me running a hydraulic horizontal bandsaw cutting all the channel for the mast on your Hyster Forklifts! It has automated feed which measures the channel length before I check measurements and start cutting. Nice piece of equipment lol Hope you're enjoying the Hysters 👍

He put the die in backwards for the punch. It's made to slide in from the front so it self aligns

Amazing machine

i used one back in the day it was a different brand but man they rock especialy for production work. totaly worth the money

Those are good machines.

Now thats a great machine to have

That machine is GREAT for the metal work you do and GREAT to see working as I do a little metal work myself. Thumbs up and shared. 444 ??

I love this channel lol

Enjoying ur vids keep em coming. Number 145

I usually work 10hrs a day but I had to stand at the piranha all day and clip atleast 1000caps for tube 5 to 6 hrs in my left foot wasn't feeling to good from leaning on it and using my right foot to operate it but I got all of it done In 2 days but we have a saw in the shop that you just roll the metal in and measure it lock the vise and turn it on push the two green buttons at the same time and it just cuts by it's self and It comes back up when it's done take the metal off stack it on a pallet pull another metal piece though and repeat very simple once you get used to it took me 1 time and I remembered how to use it ever since

I remember when we got our piranha. Got so much work done in half the time.

Very smart piece of equipment! 456

Sooooo smooth

Neat shear!!! And 633!!

Nice I work On a P50 and P70 for the past 6 years and 4.5 years on a 14 ft Piranha But I do float and work on Mills, Lasers, and saws

5:49 Well done dude, you're the king with this morphine

what a badass machine . my number 897

Hi Ron good morning 🌄🌞 I'm watching here from Philippines 🇵🇭💙

this is one of those tools that just makes life easier. like a pressure washer for example. any respectable household should have one.

American made tools - beautiful👍

Would love to see you use your harvest right freeze dryer or...get one and *then* use it ;)

Nice machine #44

Damn i wish i could afford one of those bunkers. When i win the lotto ill be calling you. 🤣

That thing is a beast! 715

122, thanks!

Nice

357 is my guess. Nice machine!!

Ron, where did you pick this Iron Worker at and when?

448. Great Video and thank you for showing your equipment

Ron- just get a laser. You make the same product over and over. You have to pay separate for the operating system. Get the programs made up for each part. I agree with the guy who says your staff need safety glasses. Steel under pressure can explode in unexpected ways.

sweet machine 286

Thank you for the video. 603

do you have anything to use when the ground outside is still nuclear and someone runs out of food

PLEASE DO MORE PIRANHA VIDEOS..❤

Have to ask. where are your enokyees PPE i don't see ear or eye protection.

Cool video. My guess is 327

We need to see more bunker installs.... #295

I've used punches before I've never used one with a handle they always have foot pedals

You should buy 2 of those machines, Ron if it is THAT important to you, as well...as it would increase production time having 2 going : ) If you REALLY want to kick ass, you may consider getting robotic assisted welders....you could mass-produce larger / or modular items more efficiently and quickly. I have been watching all of your vids and the number 1 issue you talk about is you are soooo busy. Humans are terrific and needed but if you get into a pinch and cannot produce to meet the demands, having robots around might be just what you need....IN ADDITION to having human workmanship, got to have both. I am not saying replace people, but humans need rest, time off, and simply downtime. You could have the machines build all the major components while people are at home. : ) Just like an assembly plant : )

It's a good manicuring tool

First time i've ever seen a machine like that! My number is 257

Cool stuff. 92

What optic is that ?

Impressive machine. 96

442, cool machine.

Love good mashinger 642

A second iron worker would be a good addition but you might look into adding a crane. Ps. I'm a welder fabricator so don't take it as an insult but you might want to talk with your guys about wearing PPE.

Now you all need a few LASER welders. It would save a ton on wire and gas plus a person doesn't need a whole lot of training to learn to weld with them.

Is Billy BombProof still in California?

We have one we’re I work awesome machine.

Great to watch. 161

Still faster than a plasma cutter even..

#433 That sure cuts thick stuff.

cool

That’s what she said lol 😂

Whack it. Hard. There you go. Keep coming.

883 great machine.

what is the deepest y'all can put a shelter in the ground?

It may save you time and money but also dose it save the customers a little?

Damn.

That great it cut time big time.

That machine is awesome..#455

You can be doing everything correctly on a bandsaw and still snap a blade.

How many welders do you have going at any one point there 🤯

I wanna make a underground base with so much cookies

Awesome machine Ron 👍 Best investment, period. #187 AK

45 is my number!! pick me pick me!!! i want the ak wall hangar

Who wants to play a game? Everything time Ron says ironworker u take a drink lol 😂 My # 847

Very nice. 920

Nothing like putting video up of a of guys w/ out safety glasses-

I have to keep looking for you and My # is 47

then get another of that to avoid downtime

With that machine your bunker prices should go down because you can make more pieces faster

hey ron 936

Whack it hard. Lol

💯🇺🇸👍❤

368 This is the kind of thing I could suggest to my boss and he would just complain about the cost and get mad at me for complaining about doing it the old way. He seems to hate innovation or any new tech in our trade.